| Message ID | f671beae8a8ebfd361f4c903bccce713135a169f.1701768028.git.ysato@users.sourceforge.jp (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Device Tree support for SH7751 based board | expand |
On Tue, 05 Dec 2023 18:45:41 +0900, Yoshinori Sato wrote: > Define SM501 functions and modes. > > Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> > --- > .../bindings/display/smi,sm501.yaml | 134 ++++++++++++++++++ > include/dt-bindings/display/sm501.h | 25 ++++ > 2 files changed, 159 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/smi,sm501.yaml > create mode 100644 include/dt-bindings/display/sm501.h > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/smi,sm501.yaml: interrupt-name: missing type definition /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/smi,sm501.yaml: edid: missing type definition /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/smi,sm501.yaml: crt: missing type definition doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/f671beae8a8ebfd361f4c903bccce713135a169f.1701768028.git.ysato@users.sourceforge.jp The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Tue, Dec 5, 2023, at 10:45, Yoshinori Sato wrote: > Define SM501 functions and modes. > > Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> > --- > .../bindings/display/smi,sm501.yaml | 134 ++++++++++++++++++ > include/dt-bindings/display/sm501.h | 25 ++++ It looks like we already have a binding at Documentation/devicetree/bindings/display/sm501fb.txt > + little-endian: > + $ref: /schemas/types.yaml#/definitions/flag > + description: available on big endian systems, to set different > foreign endian. > + big-endian: > + $ref: /schemas/types.yaml#/definitions/flag > + description: available on little endian systems, to set different > foreign endian. > + > + swap-fb-endian: > + $ref: /schemas/types.yaml#/definitions/flag > + description: swap framebuffer byteorder. Why do you need both the "swap" and the specific little/big properties? > + crt: > + description: CRT output control > + > + panel: > + description: Panel output control What type are these? > + smi,misc-timing: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: Miscellaneous Timing reg value. > + > + smi,misc-control: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: Miscellaneous Control reg value. > + > + smi,gpio-low: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: GPIO0 to 31 Control reg value. > + > + smi,gpio-high: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: GPIO32 to 63 Control reg value. Register values should generally not go into DT > + > + smi,gpio-i2c: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 5 > + description: | > + GPIO I2C bus number > + 1st field - I2C bus number > + 2nd Field - GPIO SDA > + 3rd Field - GPIO SCL > + 4th Field - Timeout > + 5th Field - udelay Instead of a bus number and other fields, I think this should reference an i2c device. Arnd
On 05/12/2023 14:36, Arnd Bergmann wrote: > On Tue, Dec 5, 2023, at 10:45, Yoshinori Sato wrote: >> Define SM501 functions and modes. >> >> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> >> --- >> .../bindings/display/smi,sm501.yaml | 134 ++++++++++++++++++ >> include/dt-bindings/display/sm501.h | 25 ++++ > > It looks like we already have a binding at > Documentation/devicetree/bindings/display/sm501fb.txt Which I asked to do three months ago. Several comments were simply ignored and never responded to. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/display/smi,sm501.yaml b/Documentation/devicetree/bindings/display/smi,sm501.yaml new file mode 100644 index 000000000000..df46600b8d4a --- /dev/null +++ b/Documentation/devicetree/bindings/display/smi,sm501.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/smi,sm501.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Motion SM501 Mobile Multimedia Companion Chip + +maintainers: + - Yoshinori Sato <ysato@user.sourceforge.jp> + +description: | + These DT bindings describe the SM501. + +properties: + compatible: + const: + smi,sm501 + + reg: + maxItems: 2 + description: | + First entry: System Configuration register + Second entry: IO space (Display Controller register) + + interrupts: + description: SM501 interrupt to the cpu should be described here. + + interrupt-name: true + + mode: + $ref: /schemas/types.yaml#/definitions/string + description: select a video mode + + edid: + description: | + verbatim EDID data block describing attached display. + Data from the detailed timing descriptor will be used to + program the display controller. + + little-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: available on big endian systems, to set different foreign endian. + big-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: available on little endian systems, to set different foreign endian. + + swap-fb-endian: + $ref: /schemas/types.yaml#/definitions/flag + description: swap framebuffer byteorder. + + route-crt-panel: + $ref: /schemas/types.yaml#/definitions/flag + description: Panel output merge to CRT. + + crt: + description: CRT output control + + panel: + description: Panel output control + + bpp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Color depth + + smi,flags: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Display control flags. + + smi,devices: + $ref: /schemas/types.yaml#/definitions/uint32 + description: SM501 device function select. + + smi,mclk: + $ref: /schemas/types.yaml#/definitions/uint32 + description: mclk frequency. + + smi,m1xclk: + $ref: /schemas/types.yaml#/definitions/uint32 + description: m1xclk frequency. + + smi,misc-timing: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Miscellaneous Timing reg value. + + smi,misc-control: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Miscellaneous Control reg value. + + smi,gpio-low: + $ref: /schemas/types.yaml#/definitions/uint32 + description: GPIO0 to 31 Control reg value. + + smi,gpio-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: GPIO32 to 63 Control reg value. + + smi,gpio-i2c: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 5 + description: | + GPIO I2C bus number + 1st field - I2C bus number + 2nd Field - GPIO SDA + 3rd Field - GPIO SCL + 4th Field - Timeout + 5th Field - udelay + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + + +examples: + # MPC5200 + - | + display@1,0 { + compatible = "smi,sm501"; + reg = <0x00000000 0x00800000 + 0x03e00000 0x00200000>; + interrupts = <1 1 3>; + mode = "640x480-32@60"; + edid = [00 ff ff ff ff ff ff 00 00 00 00 00 00 00 00 00 + 00 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 f0 0a 80 fb 20 e0 25 10 32 60 + 02 00 00 00 00 00 00 06 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 + 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 bd]; + }; diff --git a/include/dt-bindings/display/sm501.h b/include/dt-bindings/display/sm501.h new file mode 100644 index 000000000000..1be8490d7635 --- /dev/null +++ b/include/dt-bindings/display/sm501.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ + +/* Platform data definitions */ + +#define SM501FB_FLAG_USE_INIT_MODE (1<<0) +#define SM501FB_FLAG_DISABLE_AT_EXIT (1<<1) +#define SM501FB_FLAG_USE_HWCURSOR (1<<2) +#define SM501FB_FLAG_USE_HWACCEL (1<<3) +#define SM501FB_FLAG_PANEL_NO_FPEN (1<<4) +#define SM501FB_FLAG_PANEL_NO_VBIASEN (1<<5) +#define SM501FB_FLAG_PANEL_INV_FPEN (1<<6) +#define SM501FB_FLAG_PANEL_INV_VBIASEN (1<<7) + +#define SM501_USE_USB_HOST (1<<0) +#define SM501_USE_USB_SLAVE (1<<1) +#define SM501_USE_SSP0 (1<<2) +#define SM501_USE_SSP1 (1<<3) +#define SM501_USE_UART0 (1<<4) +#define SM501_USE_UART1 (1<<5) +#define SM501_USE_FBACCEL (1<<6) +#define SM501_USE_AC97 (1<<7) +#define SM501_USE_I2S (1<<8) +#define SM501_USE_GPIO (1<<9) + +#define SM501_USE_ALL (0xffffffff)
Define SM501 functions and modes. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> --- .../bindings/display/smi,sm501.yaml | 134 ++++++++++++++++++ include/dt-bindings/display/sm501.h | 25 ++++ 2 files changed, 159 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/smi,sm501.yaml create mode 100644 include/dt-bindings/display/sm501.h