diff mbox series

[3/3] PCI/ACPI: Add pci_acpi_program_hest_aer_params()

Message ID 20231115091612.580685-4-LeoLiu-oc@zhaoxin.com (mailing list archive)
State Superseded
Delegated to: Bjorn Helgaas
Headers show
Series Parse the HEST PCIe AER and set to relevant registers | expand

Commit Message

LeoLiu-oc Nov. 15, 2023, 9:16 a.m. UTC 
From: leoliu-oc <leoliu-oc@zhaoxin.com>

Call the func pci_acpi_program_hest_aer_params() for every PCIe device.
Extracting register value from HEST PCIe AER structures and programming
them into AER Capabilities are implemented in this function.
The implementation of the function is an effective supplement to _HPP/_HPX
method when the Firmware does not support the _HPP/_HPX method and can be
specially configured for the AER register of the specific device.

Signed-off-by: leoliu-oc <leoliu-oc@zhaoxin.com>
---
 drivers/pci/pci-acpi.c | 100 +++++++++++++++++++++++++++++++++++++++++
 drivers/pci/pci.h      |   9 ++++
 drivers/pci/probe.c    |   1 +
 3 files changed, 110 insertions(+)

Comments

Bjorn Helgaas Dec. 6, 2023, 11:08 p.m. UTC | #1 
On Wed, Nov 15, 2023 at 05:16:12PM +0800, LeoLiu-oc wrote:
> From: leoliu-oc <leoliu-oc@zhaoxin.com>
> 
> Call the func pci_acpi_program_hest_aer_params() for every PCIe device.
> Extracting register value from HEST PCIe AER structures and programming
> them into AER Capabilities are implemented in this function.
> The implementation of the function is an effective supplement to _HPP/_HPX
> method when the Firmware does not support the _HPP/_HPX method and can be
> specially configured for the AER register of the specific device.

Rewrap into a single paragraph or add blank lines between.

If this is needed to make some machine work correctly, please include
that information here.

Based on Rafael's comment about getting the actbl1.h change merged via
ACPICA first, I assume this entire series is will wait for that ACPICA
update.

Bjorn
LeoLiu-oc Dec. 14, 2023, 2:54 a.m. UTC | #2 
在 2023/12/7 7:08, Bjorn Helgaas 写道:
> On Wed, Nov 15, 2023 at 05:16:12PM +0800, LeoLiu-oc wrote:
>> From: leoliu-oc <leoliu-oc@zhaoxin.com>
>>
>> Call the func pci_acpi_program_hest_aer_params() for every PCIe device.
>> Extracting register value from HEST PCIe AER structures and programming
>> them into AER Capabilities are implemented in this function.
>> The implementation of the function is an effective supplement to _HPP/_HPX
>> method when the Firmware does not support the _HPP/_HPX method and can be
>> specially configured for the AER register of the specific device.
> 
> Rewrap into a single paragraph or add blank lines between.
> 
> If this is needed to make some machine work correctly, please include
> that information here.
> 
> Based on Rafael's comment about getting the actbl1.h change merged via
> ACPICA first, I assume this entire series is will wait for that ACPICA
> update.
> 
> Bjorn

As mentioned in email " RE [PATCH 1/3] ACPI/APEI: Add 
hest_parse_pcie_aer()" , In the next version, I will move this data 
structure to another file.

Yours sincerely,
Leoliu-oc
diff mbox series

Patch

diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 004575091596..5d04068b490e 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -18,6 +18,7 @@ 
 #include <linux/pm_runtime.h>
 #include <linux/pm_qos.h>
 #include <linux/rwsem.h>
+#include <acpi/apei.h>
 #include "pci.h"
 
 /*
@@ -783,6 +784,105 @@  int pci_acpi_program_hp_params(struct pci_dev *dev)
 	return -ENODEV;
 }
 
+#ifdef CONFIG_ACPI_APEI
+static void program_hest_aer_endpoint(struct acpi_hest_aer_common aer_endpoint,
+				struct pci_dev *dev, int pos)
+{
+	u32 uncor_mask;
+	u32 uncor_severity;
+	u32 cor_mask;
+	u32 adv_cap;
+
+	uncor_mask = aer_endpoint.uncorrectable_mask;
+	uncor_severity = aer_endpoint.uncorrectable_severity;
+	cor_mask = aer_endpoint.correctable_mask;
+	adv_cap = aer_endpoint.advanced_capabilities;
+
+	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, uncor_mask);
+	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, uncor_severity);
+	pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, cor_mask);
+	pci_write_config_dword(dev, pos + PCI_ERR_CAP, adv_cap);
+}
+
+static void program_hest_aer_root(struct acpi_hest_aer_root *aer_root,
+				struct pci_dev *dev, int pos)
+{
+	u32 root_err_cmd;
+
+	root_err_cmd = aer_root->root_error_command;
+
+	pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, root_err_cmd);
+}
+
+static void program_hest_aer_bridge(struct acpi_hest_aer_bridge *hest_aer_bridge,
+				struct pci_dev *dev, int pos)
+{
+	u32 uncor_mask2;
+	u32 uncor_severity2;
+	u32 adv_cap2;
+
+	uncor_mask2 = hest_aer_bridge->uncorrectable_mask2;
+	uncor_severity2 = hest_aer_bridge->uncorrectable_severity2;
+	adv_cap2 = hest_aer_bridge->advanced_capabilities2;
+
+	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK2, uncor_mask2);
+	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER2, uncor_severity2);
+	pci_write_config_dword(dev, pos + PCI_ERR_CAP2, adv_cap2);
+}
+
+static void program_hest_aer_params(struct hest_parse_aer_info info)
+{
+	struct pci_dev *dev;
+	int port_type;
+	int pos;
+	struct acpi_hest_aer_root *hest_aer_root;
+	struct acpi_hest_aer *hest_aer_endpoint;
+	struct acpi_hest_aer_bridge *hest_aer_bridge;
+
+	dev = info.pci_dev;
+	port_type = pci_pcie_type(dev);
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (!pos)
+		return;
+
+	switch (port_type) {
+	case PCI_EXP_TYPE_ROOT_PORT:
+		hest_aer_root = info.hest_aer_root_port;
+		program_hest_aer_endpoint(hest_aer_root->aer, dev, pos);
+		program_hest_aer_root(hest_aer_root, dev, pos);
+	break;
+	case PCI_EXP_TYPE_ENDPOINT:
+		hest_aer_endpoint = info.hest_aer_endpoint;
+		program_hest_aer_endpoint(hest_aer_endpoint->aer, dev, pos);
+	break;
+	case PCI_EXP_TYPE_PCI_BRIDGE:
+	case PCI_EXP_TYPE_PCIE_BRIDGE:
+		hest_aer_bridge = info.hest_aer_bridge;
+		program_hest_aer_endpoint(hest_aer_bridge->aer, dev, pos);
+		program_hest_aer_bridge(hest_aer_bridge, dev, pos);
+	break;
+	default:
+		return;
+	break;
+	}
+}
+
+int pci_acpi_program_hest_aer_params(struct pci_dev *dev)
+{
+	struct hest_parse_aer_info info = {
+		.pci_dev = dev
+	};
+
+	if (!pci_is_pcie(dev))
+		return -ENODEV;
+
+	if (apei_hest_parse(hest_parse_pcie_aer, &info) == 1)
+		program_hest_aer_params(info);
+
+	return 0;
+}
+#endif
+
 /**
  * pciehp_is_native - Check whether a hotplug port is handled by the OS
  * @bridge: Hotplug port to check
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 5ecbcf041179..1fc28f7a5972 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -714,6 +714,15 @@  static inline void pci_save_aer_state(struct pci_dev *dev) { }
 static inline void pci_restore_aer_state(struct pci_dev *dev) { }
 #endif
 
+#ifdef CONFIG_ACPI_APEI
+int pci_acpi_program_hest_aer_params(struct pci_dev *dev);
+#else
+static inline int pci_acpi_program_hest_aer_params(struct pci_dev *dev)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_ACPI
 int pci_acpi_program_hp_params(struct pci_dev *dev);
 extern const struct attribute_group pci_dev_acpi_attr_group;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ed6b7f48736a..45a45ab72846 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2274,6 +2274,7 @@  static void pci_configure_device(struct pci_dev *dev)
 	pci_configure_serr(dev);
 
 	pci_acpi_program_hp_params(dev);
+	pci_acpi_program_hest_aer_params(dev);
 }
 
 static void pci_release_capabilities(struct pci_dev *dev)