| Message ID | 20231207221426.3259806-3-andriy.shevchenko@linux.intel.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | spi: pxa2xx: Update documentation | expand |
On Fri, Dec 08, 2023 at 12:13:40AM +0200, Andy Shevchenko wrote: > Update DMA mapping and using logic in the documentation to follow what > the code does. ... > - if !enable_dma then > - always use PIO transfers > + if spi_message.len > 65536 then > + if spi_message.is_dma_mapped or rx_dma_buf != 0 or tx_dma_buf != 0 then > + reject premapped transfers Here seems inconsistent indentation. I'll fix it in the next version. Mark, should I resend patch 1 as well?
On Fri, Dec 08, 2023 at 06:12:05PM +0200, Andy Shevchenko wrote: > Here seems inconsistent indentation. I'll fix it in the next version. > Mark, should I resend patch 1 as well? Yes, please.
diff --git a/Documentation/spi/pxa2xx.rst b/Documentation/spi/pxa2xx.rst index b66702724ccf..61c7b9dd833b 100644 --- a/Documentation/spi/pxa2xx.rst +++ b/Documentation/spi/pxa2xx.rst @@ -193,17 +193,14 @@ mode supports both coherent and stream based DMA mappings. The following logic is used to determine the type of I/O to be used on a per "spi_transfer" basis:: - if !enable_dma then - always use PIO transfers + if spi_message.len > 65536 then + if spi_message.is_dma_mapped or rx_dma_buf != 0 or tx_dma_buf != 0 then + reject premapped transfers - if spi_message.len > 8191 then print "rate limited" warning use PIO transfers - if spi_message.is_dma_mapped and rx_dma_buf != 0 and tx_dma_buf != 0 then - use coherent DMA mode - - if rx_buf and tx_buf are aligned on 8 byte boundary then + if enable_dma and the size is in the range [DMA burst size..65536] then use streaming DMA mode otherwise
Update DMA mapping and using logic in the documentation to follow what the code does. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- Documentation/spi/pxa2xx.rst | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)