diff mbox series

ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node

Message ID 20231204072537.2991-1-mihai.sain@microchip.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node | expand

Commit Message

Mihai Sain Dec. 4, 2023, 7:25 a.m. UTC
On board the sdmmc0 interface is wired to a SD Card socket.
According with mmc-controller bindings, the mmc-ddr-3_3v property
is used for eMMC devices to enable high-speed DDR mode (3.3V I/O).
Remove the mmc-ddr-3_3v property from sdmmc0 node.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
---
 arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts | 1 -
 1 file changed, 1 deletion(-)

Comments

Claudiu Beznea Dec. 9, 2023, 12:56 p.m. UTC | #1
On 04.12.2023 09:25, Mihai Sain wrote:
> On board the sdmmc0 interface is wired to a SD Card socket.
> According with mmc-controller bindings, the mmc-ddr-3_3v property
> is used for eMMC devices to enable high-speed DDR mode (3.3V I/O).
> Remove the mmc-ddr-3_3v property from sdmmc0 node.
> 
> Signed-off-by: Mihai Sain <mihai.sain@microchip.com>

Applied to at91-dt, thanks!

> ---
>  arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
> index e055b9e2fe34..15239834d886 100644
> --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
> @@ -197,7 +197,6 @@ qspi1_flash: flash@0 {
>  
>  &sdmmc0 {
>  	bus-width = <4>;
> -	mmc-ddr-3_3v;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_sdmmc0_default>;
>  	status = "okay";
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index e055b9e2fe34..15239834d886 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,7 +197,6 @@  qspi1_flash: flash@0 {
 
 &sdmmc0 {
 	bus-width = <4>;
-	mmc-ddr-3_3v;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc0_default>;
 	status = "okay";