| Message ID | 32b332af189bfca8acdb231cee294355aa4af290.1701892062.git.msuchanek@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v6,1/2] depmod: Handle installing modules under a different directory | expand |
On Thu, Dec 7, 2023 at 4:48 AM Michal Suchanek <msuchanek@suse.de> wrote: > > Some distributions aim at shipping all files in /usr. > > The path under which kernel modules are installed is hardcoded to /lib > which conflicts with this goal. > > When kmod provides kmod.pc, use it to determine the correct module > installation path. > > With kmod that does not provide the config /lib/modules is used as > before. > > While pkg-config does not return an error when a variable does not exist > the kmod configure script puts some effort into ensuring that > module_directory is non-empty. With that empty module_directory from > pkg-config can be used to detect absence of the variable. > > Signed-off-by: Michal Suchanek <msuchanek@suse.de> > --- > v6: > - use ?= instead of := to make it easier to override the value "KERNEL_MODULE_DIRECTORY=/local/usr/lib/modules make modules_install" will override the install destination, but depmod will not be not aware of it. How to avoid the depmod error? > - use shorter expression for determining the module directory assuming > it's non-empty > --- > Makefile | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Makefile b/Makefile > index 511b5616aa41..84f32bd563d4 100644 > --- a/Makefile > +++ b/Makefile > @@ -1081,7 +1081,9 @@ export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) > # makefile but the argument can be passed to make if needed. > # > > -MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) > +export KERNEL_MODULE_DIRECTORY ?= $(or $(shell pkg-config --variable=module_directory kmod 2>/dev/null),/lib/modules) > + > +MODLIB = $(INSTALL_MOD_PATH)$(KERNEL_MODULE_DIRECTORY)/$(KERNELRELEASE) > export MODLIB > > PHONY += prepare0 > -- > 2.42.0 > > -- Best Regards Masahiro Yamada
Masahiro Yamada wrote: > On Thu, Dec 7, 2023 at 4:48 AM Michal Suchanek <msuchanek@suse.de> wrote: >> Some distributions aim at shipping all files in /usr. >> >> The path under which kernel modules are installed is hardcoded to /lib >> which conflicts with this goal. >> >> When kmod provides kmod.pc, use it to determine the correct module >> installation path. >> >> With kmod that does not provide the config /lib/modules is used as >> before. >> >> While pkg-config does not return an error when a variable does not exist >> the kmod configure script puts some effort into ensuring that >> module_directory is non-empty. With that empty module_directory from >> pkg-config can be used to detect absence of the variable. >> >> Signed-off-by: Michal Suchanek <msuchanek@suse.de> >> --- >> v6: >> - use ?= instead of := to make it easier to override the value > > "KERNEL_MODULE_DIRECTORY=/local/usr/lib/modules make modules_install" > will override the install destination, but > depmod will not be not aware of it. > > How to avoid the depmod error? > > I think the depmod -b option can be used to ran depmod in an arbitrary location: The following options are useful for people managing distributions: -b, --basedir=DIR Use an image of a module tree. Woody > > > > > > > > > > > >> - use shorter expression for determining the module directory assuming >> it's non-empty >> --- >> Makefile | 4 +++- >> 1 file changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/Makefile b/Makefile >> index 511b5616aa41..84f32bd563d4 100644 >> --- a/Makefile >> +++ b/Makefile >> @@ -1081,7 +1081,9 @@ export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) >> # makefile but the argument can be passed to make if needed. >> # >> >> -MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) >> +export KERNEL_MODULE_DIRECTORY ?= $(or $(shell pkg-config --variable=module_directory kmod 2>/dev/null),/lib/modules) >> + >> +MODLIB = $(INSTALL_MOD_PATH)$(KERNEL_MODULE_DIRECTORY)/$(KERNELRELEASE) >> export MODLIB >> >> PHONY += prepare0 >> -- >> 2.42.0 >> >> > > -- > Best Regards > Masahiro Yamada
Hello! On Mon, Dec 11, 2023 at 03:43:44AM +0900, Masahiro Yamada wrote: > On Thu, Dec 7, 2023 at 4:48 AM Michal Suchanek <msuchanek@suse.de> wrote: > > > > Some distributions aim at shipping all files in /usr. > > > > The path under which kernel modules are installed is hardcoded to /lib > > which conflicts with this goal. > > > > When kmod provides kmod.pc, use it to determine the correct module > > installation path. > > > > With kmod that does not provide the config /lib/modules is used as > > before. > > > > While pkg-config does not return an error when a variable does not exist > > the kmod configure script puts some effort into ensuring that > > module_directory is non-empty. With that empty module_directory from > > pkg-config can be used to detect absence of the variable. > > > > Signed-off-by: Michal Suchanek <msuchanek@suse.de> > > --- > > v6: > > - use ?= instead of := to make it easier to override the value > > > "KERNEL_MODULE_DIRECTORY=/local/usr/lib/modules make modules_install" > will override the install destination, but > depmod will not be not aware of it. At the same time if you know what you are doing you can build a src rpm for another system that uses a different location. > How to avoid the depmod error? Not override the variable? Thanks Michal > > - use shorter expression for determining the module directory assuming > > it's non-empty > > --- > > Makefile | 4 +++- > > 1 file changed, 3 insertions(+), 1 deletion(-) > > > > diff --git a/Makefile b/Makefile > > index 511b5616aa41..84f32bd563d4 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -1081,7 +1081,9 @@ export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) > > # makefile but the argument can be passed to make if needed. > > # > > > > -MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) > > +export KERNEL_MODULE_DIRECTORY ?= $(or $(shell pkg-config --variable=module_directory kmod 2>/dev/null),/lib/modules) > > + > > +MODLIB = $(INSTALL_MOD_PATH)$(KERNEL_MODULE_DIRECTORY)/$(KERNELRELEASE) > > export MODLIB > > > > PHONY += prepare0 > > -- > > 2.42.0 > > > > > > > -- > Best Regards > Masahiro Yamada
On Mon, Dec 11, 2023 at 6:07 AM Michal Suchánek <msuchanek@suse.de> wrote: > > Hello! > > On Mon, Dec 11, 2023 at 03:43:44AM +0900, Masahiro Yamada wrote: > > On Thu, Dec 7, 2023 at 4:48 AM Michal Suchanek <msuchanek@suse.de> wrote: > > > > > > Some distributions aim at shipping all files in /usr. > > > > > > The path under which kernel modules are installed is hardcoded to /lib > > > which conflicts with this goal. > > > > > > When kmod provides kmod.pc, use it to determine the correct module > > > installation path. > > > > > > With kmod that does not provide the config /lib/modules is used as > > > before. > > > > > > While pkg-config does not return an error when a variable does not exist > > > the kmod configure script puts some effort into ensuring that > > > module_directory is non-empty. With that empty module_directory from > > > pkg-config can be used to detect absence of the variable. > > > > > > Signed-off-by: Michal Suchanek <msuchanek@suse.de> > > > --- > > > v6: > > > - use ?= instead of := to make it easier to override the value > > > > > > "KERNEL_MODULE_DIRECTORY=/local/usr/lib/modules make modules_install" > > will override the install destination, but > > depmod will not be not aware of it. > > At the same time if you know what you are doing you can build a src rpm > for another system that uses a different location. > > > How to avoid the depmod error? > > Not override the variable? You are not answering my question. You intentionally changed := to ?=. This implies that KERNEL_MODULE_DIRECTORY is an interface to users, and should be documented in Documentation/kbuild/kbuild.rst However, it never works if it is overridden from the env variable or make command line because there is no way to let depmod know the fact that KERNEL_MODULE_DIRECTORY has been overridden. In my understanding, depmod does not provide an option to specify the module directory from a command line option, does it? If not, is it reasonable to add a new option to depmod? depmod provides the "-b basedir" option, but it only allows adding a prefix to the default "/lib/modules/<version>". (My original idea to provide the prefix_part, it would have worked like -b "${INSTALL_MOD_PATH}${MOD_PREFIX}", which you refused) > Thanks > > Michal > > > > - use shorter expression for determining the module directory assuming > > > it's non-empty > > > --- > > > Makefile | 4 +++- > > > 1 file changed, 3 insertions(+), 1 deletion(-) > > > > > > diff --git a/Makefile b/Makefile > > > index 511b5616aa41..84f32bd563d4 100644 > > > --- a/Makefile > > > +++ b/Makefile > > > @@ -1081,7 +1081,9 @@ export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) > > > # makefile but the argument can be passed to make if needed. > > > # > > > > > > -MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) > > > +export KERNEL_MODULE_DIRECTORY ?= $(or $(shell pkg-config --variable=module_directory kmod 2>/dev/null),/lib/modules) > > > + > > > +MODLIB = $(INSTALL_MOD_PATH)$(KERNEL_MODULE_DIRECTORY)/$(KERNELRELEASE) > > > export MODLIB > > > > > > PHONY += prepare0 > > > -- > > > 2.42.0 > > > > > > > > > > > > -- > > Best Regards > > Masahiro Yamada >
On Mon, Dec 11, 2023 at 01:29:15PM +0900, Masahiro Yamada wrote: > On Mon, Dec 11, 2023 at 6:07 AM Michal Suchánek <msuchanek@suse.de> wrote: > > > > Hello! > > > > On Mon, Dec 11, 2023 at 03:43:44AM +0900, Masahiro Yamada wrote: > > > On Thu, Dec 7, 2023 at 4:48 AM Michal Suchanek <msuchanek@suse.de> wrote: > > > > > > > > Some distributions aim at shipping all files in /usr. > > > > > > > > The path under which kernel modules are installed is hardcoded to /lib > > > > which conflicts with this goal. > > > > > > > > When kmod provides kmod.pc, use it to determine the correct module > > > > installation path. > > > > > > > > With kmod that does not provide the config /lib/modules is used as > > > > before. > > > > > > > > While pkg-config does not return an error when a variable does not exist > > > > the kmod configure script puts some effort into ensuring that > > > > module_directory is non-empty. With that empty module_directory from > > > > pkg-config can be used to detect absence of the variable. > > > > > > > > Signed-off-by: Michal Suchanek <msuchanek@suse.de> > > > > --- > > > > v6: > > > > - use ?= instead of := to make it easier to override the value > > > > > > > > > "KERNEL_MODULE_DIRECTORY=/local/usr/lib/modules make modules_install" > > > will override the install destination, but > > > depmod will not be not aware of it. > > > > At the same time if you know what you are doing you can build a src rpm > > for another system that uses a different location. > > > > > How to avoid the depmod error? > > > > Not override the variable? > > You are not answering my question. > You intentionally changed := to ?=. > > This implies that KERNEL_MODULE_DIRECTORY is an interface to users, > and should be documented in Documentation/kbuild/kbuild.rst That's reasonable > However, it never works if it is overridden from the env variable > or make command line because there is no way to let depmod know > the fact that KERNEL_MODULE_DIRECTORY has been overridden. And there should not. kmod is not aware, kbuild is. That's the direction of information flow. kmod defines where it looks for the modules, and kbuild shoukld install the modules there. If the user knows better (eg. possibility of building src-rpm for a different you brought up) they can override the autodetection. > In my understanding, depmod does not provide an option to > specify the module directory from a command line option, does it? No it does not. > If not, is it reasonable to add a new option to depmod? I don't think so. The module directory is intentionally in a fixed location. It can be set at compile time, and that's it. Then when running depmod on the target distribution either kbuild and kmod agree on the location or the build fails. That's the intended outcome. kmod recently grew the ability to use modules outside of module directory. For that to work internally the path to these out-of-kernel modules is stored as absolute path, and the path of modules that are in the module directory is stored relative to the module directory. Setting the module directory location dynamically still should not break this but I am not sure it's a great idea. In the end modprobe needs to find those modules, and if depmod puts the modules.dep in arbitrary location it will not. > depmod provides the "-b basedir" option, but it only allows > adding a prefix to the default "/lib/modules/<version>". Yes, that's for installation into a staging directory, and there again the modules that are inside the module directory are considedred 'in-kernel'. Not sure how well this even works with 'out-of-kernel' modules. > (My original idea to provide the prefix_part, it would have worked > like -b "${INSTALL_MOD_PATH}${MOD_PREFIX}", which you refused) It's not clear that adding a prefix covers all use cases. It is an arbitrary limitation that the module path must end with '/lib/modules'. It may allow taking some shortcuts in some places but is unnecessarily limiting. Thanks Michal
On Tue, Dec 12, 2023 at 10:03 PM Michal Suchánek <msuchanek@suse.de> wrote: > > On Mon, Dec 11, 2023 at 01:29:15PM +0900, Masahiro Yamada wrote: > > On Mon, Dec 11, 2023 at 6:07 AM Michal Suchánek <msuchanek@suse.de> wrote: > > > > > > Hello! > > > > > > On Mon, Dec 11, 2023 at 03:43:44AM +0900, Masahiro Yamada wrote: > > > > On Thu, Dec 7, 2023 at 4:48 AM Michal Suchanek <msuchanek@suse.de> wrote: > > > > > > > > > > Some distributions aim at shipping all files in /usr. > > > > > > > > > > The path under which kernel modules are installed is hardcoded to /lib > > > > > which conflicts with this goal. > > > > > > > > > > When kmod provides kmod.pc, use it to determine the correct module > > > > > installation path. > > > > > > > > > > With kmod that does not provide the config /lib/modules is used as > > > > > before. > > > > > > > > > > While pkg-config does not return an error when a variable does not exist > > > > > the kmod configure script puts some effort into ensuring that > > > > > module_directory is non-empty. With that empty module_directory from > > > > > pkg-config can be used to detect absence of the variable. > > > > > > > > > > Signed-off-by: Michal Suchanek <msuchanek@suse.de> > > > > > --- > > > > > v6: > > > > > - use ?= instead of := to make it easier to override the value > > > > > > > > > > > > "KERNEL_MODULE_DIRECTORY=/local/usr/lib/modules make modules_install" > > > > will override the install destination, but > > > > depmod will not be not aware of it. > > > > > > At the same time if you know what you are doing you can build a src rpm > > > for another system that uses a different location. > > > > > > > How to avoid the depmod error? > > > > > > Not override the variable? > > > > You are not answering my question. > > You intentionally changed := to ?=. > > > > This implies that KERNEL_MODULE_DIRECTORY is an interface to users, > > and should be documented in Documentation/kbuild/kbuild.rst > > That's reasonable > > > However, it never works if it is overridden from the env variable > > or make command line because there is no way to let depmod know > > the fact that KERNEL_MODULE_DIRECTORY has been overridden. > > And there should not. kmod is not aware, kbuild is. That's the > direction of information flow. kmod defines where it looks for the > modules, and kbuild shoukld install the modules there. Then, you cannot explain why KERNEL_MODULE_DIRECTORY should be exposed as a user interface. The MODULE_DIRECTORY in depmod is determined when kmod is compiled. Kbuild takes KERNEL_MODULE_DIRECTORY from pkg-config. If these two do not agree, it never works. > If the user knows better (eg. possibility of building src-rpm for a > different you brought up) they can override the autodetection. No, it does not work. The user has no way to override the MODULE_DIRECTORY in depmod. > > In my understanding, depmod does not provide an option to > > specify the module directory from a command line option, does it? > > No it does not. > > > If not, is it reasonable to add a new option to depmod? > > I don't think so. The module directory is intentionally in a fixed > location. It can be set at compile time, and that's it. > > Then when running depmod on the target distribution either kbuild and > kmod agree on the location or the build fails. That's the intended > outcome. > > kmod recently grew the ability to use modules outside of module > directory. For that to work internally the path to these out-of-kernel > modules is stored as absolute path, and the path of modules that are in > the module directory is stored relative to the module directory. > > Setting the module directory location dynamically still should not break > this but I am not sure it's a great idea. In the end modprobe needs to > find those modules, and if depmod puts the modules.dep in arbitrary > location it will not. That is true when modules are compiled and installed on the local machine. If you create an SRPM with KERNEL_MODULE_DIRECTORY, builders must follow it. > > > depmod provides the "-b basedir" option, but it only allows > > adding a prefix to the default "/lib/modules/<version>". > > Yes, that's for installation into a staging directory, and there again > the modules that are inside the module directory are considedred > 'in-kernel'. Not sure how well this even works with 'out-of-kernel' > modules. > > > (My original idea to provide the prefix_part, it would have worked > > like -b "${INSTALL_MOD_PATH}${MOD_PREFIX}", which you refused) > > It's not clear that adding a prefix covers all use cases. It is an > arbitrary limitation that the module path must end with '/lib/modules'. > > It may allow taking some shortcuts in some places but is unnecessarily > limiting. > > Thanks > > Michal
diff --git a/Makefile b/Makefile index 511b5616aa41..84f32bd563d4 100644 --- a/Makefile +++ b/Makefile @@ -1081,7 +1081,9 @@ export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) # makefile but the argument can be passed to make if needed. # -MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) +export KERNEL_MODULE_DIRECTORY ?= $(or $(shell pkg-config --variable=module_directory kmod 2>/dev/null),/lib/modules) + +MODLIB = $(INSTALL_MOD_PATH)$(KERNEL_MODULE_DIRECTORY)/$(KERNELRELEASE) export MODLIB PHONY += prepare0
Some distributions aim at shipping all files in /usr. The path under which kernel modules are installed is hardcoded to /lib which conflicts with this goal. When kmod provides kmod.pc, use it to determine the correct module installation path. With kmod that does not provide the config /lib/modules is used as before. While pkg-config does not return an error when a variable does not exist the kmod configure script puts some effort into ensuring that module_directory is non-empty. With that empty module_directory from pkg-config can be used to detect absence of the variable. Signed-off-by: Michal Suchanek <msuchanek@suse.de> --- v6: - use ?= instead of := to make it easier to override the value - use shorter expression for determining the module directory assuming it's non-empty --- Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)