Message ID | 20231211165708.161808-4-biju.das.jz@bp.renesas.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add polling support for DA9063 onkey driver | expand |
Hi All, > -----Original Message----- > From: Biju Das <biju.das.jz@bp.renesas.com> > Sent: Monday, December 11, 2023 4:57 PM > Subject: [PATCH 3/3] Input: da9063 - Add polling support > > On some platforms (eg: RZ/{G2UL,Five} SMARC EVK), there is no IRQ > populated by default. Add polling support. > > While at it, doing some cleanups in da9063_poll_on(). > > Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> > --- > drivers/input/misc/da9063_onkey.c | 88 +++++++++++++++++++++++-------- > 1 file changed, 66 insertions(+), 22 deletions(-) > > diff --git a/drivers/input/misc/da9063_onkey.c > b/drivers/input/misc/da9063_onkey.c > index 536220662b38..b9bb8c1cb758 100644 > --- a/drivers/input/misc/da9063_onkey.c > +++ b/drivers/input/misc/da9063_onkey.c > @@ -19,6 +19,8 @@ > #include <linux/mfd/da9062/core.h> > #include <linux/mfd/da9062/registers.h> > > +#define DA9062_KEY_THRESHOLD_MSEC (200) > + > struct da906x_chip_config { > /* REGS */ > int onkey_status; > @@ -42,6 +44,8 @@ struct da9063_onkey { > const struct da906x_chip_config *config; > char phys[32]; > bool key_power; > + unsigned int poll_interval; > + unsigned int key_threshold_release_time; > }; > > static const struct da906x_chip_config da9063_regs = { @@ -86,15 +90,27 > @@ static void da9063_poll_on(struct work_struct *work) > int error; > > /* Poll to see when the pin is released */ > - error = regmap_read(onkey->regmap, > - config->onkey_status, > - &val); > + error = regmap_read(onkey->regmap, config->onkey_status, &val); > if (error) { > - dev_err(onkey->dev, > - "Failed to read ON status: %d\n", error); > + dev_err(onkey->dev, "Failed to read ON status: %d\n", error); > goto err_poll; > } > > + if (onkey->poll_interval && > + onkey->key_threshold_release_time <= DA9062_KEY_THRESHOLD_MSEC) > { > + /* detect short press or long key press */ > + if (!(val & config->onkey_nonkey_mask)) { > + input_report_key(onkey->input, KEY_POWER, 0); > + input_sync(onkey->input); > + onkey->key_threshold_release_time = 0; > + dev_dbg(onkey->dev, "KEY_POWER short press.\n"); > + } else { > + schedule_delayed_work(&onkey->work, > msecs_to_jiffies(50)); > + onkey->key_threshold_release_time += 50; > + } > + return; > + } > + > if (!(val & config->onkey_nonkey_mask)) { > error = regmap_update_bits(onkey->regmap, > config->onkey_pwr_signalling, > @@ -177,6 +193,21 @@ static irqreturn_t da9063_onkey_irq_handler(int irq, > void *data) > return IRQ_HANDLED; > } > > +static void da9063_onkey_polled_poll(struct input_dev *input) { > + struct da9063_onkey *onkey = input_get_drvdata(input); > + const struct da906x_chip_config *config = onkey->config; > + unsigned int val; > + int error; > + > + error = regmap_read(onkey->regmap, config->onkey_status, &val); > + if (onkey->key_power && !error && (val & config->onkey_nonkey_mask)) > { > + input_report_key(onkey->input, KEY_POWER, 1); > + input_sync(onkey->input); > + schedule_delayed_work(&onkey->work, 0); > + } > +} > + > static int da9063_onkey_probe(struct platform_device *pdev) { > struct da9063_onkey *onkey; > @@ -222,25 +253,38 @@ static int da9063_onkey_probe(struct platform_device > *pdev) > return dev_err_probe(&pdev->dev, error, > "Failed to add cancel poll action\n"); > > - irq = platform_get_irq_byname(pdev, "ONKEY"); > - if (irq < 0) > + irq = platform_get_irq_byname_optional(pdev, "ONKEY"); > + if (irq != -ENXIO) > return irq; Oops, this check is wrong for IRQ case. I will send v2, once I get feedback for this patch series. It should be like [1] [1] https://patchwork.kernel.org/project/linux-renesas-soc/patch/20231204130504.126787-2-biju.das.jz@bp.renesas.com/ Cheers, Biju > > - error = devm_request_threaded_irq(&pdev->dev, irq, > - NULL, da9063_onkey_irq_handler, > - IRQF_TRIGGER_LOW | IRQF_ONESHOT, > - "ONKEY", onkey); > - if (error) > - return dev_err_probe(&pdev->dev, error, > - "Failed to request IRQ %d\n", irq); > - > - error = dev_pm_set_wake_irq(&pdev->dev, irq); > - if (error) > - dev_warn(&pdev->dev, > - "Failed to set IRQ %d as a wake IRQ: %d\n", > - irq, error); > - else > - device_init_wakeup(&pdev->dev, true); > + if (irq >= 0) { > + error = devm_request_threaded_irq(&pdev->dev, irq, > + NULL, da9063_onkey_irq_handler, > + IRQF_TRIGGER_LOW | IRQF_ONESHOT, > + "ONKEY", onkey); > + if (error) > + return dev_err_probe(&pdev->dev, error, > + "Failed to request IRQ %d\n", irq); > + > + error = dev_pm_set_wake_irq(&pdev->dev, irq); > + if (error) > + dev_warn(&pdev->dev, > + "Failed to set IRQ %d as a wake IRQ: %d\n", > + irq, error); > + else > + device_init_wakeup(&pdev->dev, true); > + } else { > + input_set_drvdata(onkey->input, onkey); > + device_property_read_u32(&pdev->dev, "poll-interval", > + &onkey->poll_interval); > + error = input_setup_polling(onkey->input, > + da9063_onkey_polled_poll); > + if (error) > + return dev_err_probe(&pdev->dev, error, > + "unable to set up polling\n"); > + > + input_set_poll_interval(onkey->input, onkey->poll_interval); > + } > > error = input_register_device(onkey->input); > if (error) > -- > 2.25.1
diff --git a/drivers/input/misc/da9063_onkey.c b/drivers/input/misc/da9063_onkey.c index 536220662b38..b9bb8c1cb758 100644 --- a/drivers/input/misc/da9063_onkey.c +++ b/drivers/input/misc/da9063_onkey.c @@ -19,6 +19,8 @@ #include <linux/mfd/da9062/core.h> #include <linux/mfd/da9062/registers.h> +#define DA9062_KEY_THRESHOLD_MSEC (200) + struct da906x_chip_config { /* REGS */ int onkey_status; @@ -42,6 +44,8 @@ struct da9063_onkey { const struct da906x_chip_config *config; char phys[32]; bool key_power; + unsigned int poll_interval; + unsigned int key_threshold_release_time; }; static const struct da906x_chip_config da9063_regs = { @@ -86,15 +90,27 @@ static void da9063_poll_on(struct work_struct *work) int error; /* Poll to see when the pin is released */ - error = regmap_read(onkey->regmap, - config->onkey_status, - &val); + error = regmap_read(onkey->regmap, config->onkey_status, &val); if (error) { - dev_err(onkey->dev, - "Failed to read ON status: %d\n", error); + dev_err(onkey->dev, "Failed to read ON status: %d\n", error); goto err_poll; } + if (onkey->poll_interval && + onkey->key_threshold_release_time <= DA9062_KEY_THRESHOLD_MSEC) { + /* detect short press or long key press */ + if (!(val & config->onkey_nonkey_mask)) { + input_report_key(onkey->input, KEY_POWER, 0); + input_sync(onkey->input); + onkey->key_threshold_release_time = 0; + dev_dbg(onkey->dev, "KEY_POWER short press.\n"); + } else { + schedule_delayed_work(&onkey->work, msecs_to_jiffies(50)); + onkey->key_threshold_release_time += 50; + } + return; + } + if (!(val & config->onkey_nonkey_mask)) { error = regmap_update_bits(onkey->regmap, config->onkey_pwr_signalling, @@ -177,6 +193,21 @@ static irqreturn_t da9063_onkey_irq_handler(int irq, void *data) return IRQ_HANDLED; } +static void da9063_onkey_polled_poll(struct input_dev *input) +{ + struct da9063_onkey *onkey = input_get_drvdata(input); + const struct da906x_chip_config *config = onkey->config; + unsigned int val; + int error; + + error = regmap_read(onkey->regmap, config->onkey_status, &val); + if (onkey->key_power && !error && (val & config->onkey_nonkey_mask)) { + input_report_key(onkey->input, KEY_POWER, 1); + input_sync(onkey->input); + schedule_delayed_work(&onkey->work, 0); + } +} + static int da9063_onkey_probe(struct platform_device *pdev) { struct da9063_onkey *onkey; @@ -222,25 +253,38 @@ static int da9063_onkey_probe(struct platform_device *pdev) return dev_err_probe(&pdev->dev, error, "Failed to add cancel poll action\n"); - irq = platform_get_irq_byname(pdev, "ONKEY"); - if (irq < 0) + irq = platform_get_irq_byname_optional(pdev, "ONKEY"); + if (irq != -ENXIO) return irq; - error = devm_request_threaded_irq(&pdev->dev, irq, - NULL, da9063_onkey_irq_handler, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - "ONKEY", onkey); - if (error) - return dev_err_probe(&pdev->dev, error, - "Failed to request IRQ %d\n", irq); - - error = dev_pm_set_wake_irq(&pdev->dev, irq); - if (error) - dev_warn(&pdev->dev, - "Failed to set IRQ %d as a wake IRQ: %d\n", - irq, error); - else - device_init_wakeup(&pdev->dev, true); + if (irq >= 0) { + error = devm_request_threaded_irq(&pdev->dev, irq, + NULL, da9063_onkey_irq_handler, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "ONKEY", onkey); + if (error) + return dev_err_probe(&pdev->dev, error, + "Failed to request IRQ %d\n", irq); + + error = dev_pm_set_wake_irq(&pdev->dev, irq); + if (error) + dev_warn(&pdev->dev, + "Failed to set IRQ %d as a wake IRQ: %d\n", + irq, error); + else + device_init_wakeup(&pdev->dev, true); + } else { + input_set_drvdata(onkey->input, onkey); + device_property_read_u32(&pdev->dev, "poll-interval", + &onkey->poll_interval); + error = input_setup_polling(onkey->input, + da9063_onkey_polled_poll); + if (error) + return dev_err_probe(&pdev->dev, error, + "unable to set up polling\n"); + + input_set_poll_interval(onkey->input, onkey->poll_interval); + } error = input_register_device(onkey->input); if (error)
On some platforms (eg: RZ/{G2UL,Five} SMARC EVK), there is no IRQ populated by default. Add polling support. While at it, doing some cleanups in da9063_poll_on(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- drivers/input/misc/da9063_onkey.c | 88 +++++++++++++++++++++++-------- 1 file changed, 66 insertions(+), 22 deletions(-)