| Message ID | 510af8550385da947e2e2516629c4fbed7fc0f64.1702352117.git.daniel@makrotopia.org (mailing list archive) |
|---|---|
| State | RFC |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | Add support for 10G Ethernet SerDes on MT7988 | expand |
On Tue, 12 Dec 2023 03:47:31 +0000, Daniel Golle wrote: > MediaTek's USXGMII can be found in the MT7988 SoC. We need to access > it in order to configure and monitor the Ethernet SerDes link in > USXGMII, 10GBase-R and 5GBase-R mode. By including a wrapped > legacy 1000Base-X/2500Base-X/Cisco SGMII LynxI PCS as well, those > interface modes are also available. > > Signed-off-by: Daniel Golle <daniel@makrotopia.org> > --- > .../bindings/net/pcs/mediatek,usxgmii.yaml | 60 +++++++++++++++++++ > 1 file changed, 60 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/510af8550385da947e2e2516629c4fbed7fc0f64.1702352117.git.daniel@makrotopia.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Tue, Dec 12, 2023 at 03:47:31AM +0000, Daniel Golle wrote: > MediaTek's USXGMII can be found in the MT7988 SoC. We need to access > it in order to configure and monitor the Ethernet SerDes link in > USXGMII, 10GBase-R and 5GBase-R mode. By including a wrapped > legacy 1000Base-X/2500Base-X/Cisco SGMII LynxI PCS as well, those > interface modes are also available. > > Signed-off-by: Daniel Golle <daniel@makrotopia.org> > --- > .../bindings/net/pcs/mediatek,usxgmii.yaml | 60 +++++++++++++++++++ > 1 file changed, 60 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml > > diff --git a/Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml b/Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml > new file mode 100644 > index 0000000000000..0cdaa3545edb0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml > @@ -0,0 +1,60 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/pcs/mediatek,usxgmii.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek USXGMII PCS > + > +maintainers: > + - Daniel Golle <daniel@makrotopia.org> > + > +description: > + The MediaTek USXGMII PCS provides physical link control and status > + for USXGMII, 10GBase-R and 5GBase-R links on the SerDes interfaces > + provided by the PEXTP PHY. > + In order to also support legacy 2500Base-X, 1000Base-X and Cisco > + SGMII an existing mediatek,*-sgmiisys LynxI PCS is wrapped to > + provide those interfaces modes on the same SerDes interfaces shared > + with the USXGMII PCS. > + > +properties: > + $nodename: > + pattern: "^pcs@[0-9a-f]+$" > + > + compatible: > + const: mediatek,mt7988-usxgmiisys > + > + reg: > + maxItems: 1 > + > + clocks: > + items: > + - description: USXGMII top-level clock > + > + resets: > + items: > + - description: XFI reset For this two, why not just "maxItems: 1", since there are only one of each? > + > +required: > + - compatible > + - reg > + - clocks > + - resets > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/mediatek,mt7988-clk.h> > + #define MT7988_TOPRGU_XFI0_GRST 12 Why? You can just put the raw numbers here and avoid the issues with the bot being unable to test your series. > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + usxgmiisys0: pcs@10080000 { > + compatible = "mediatek,mt7988-usxgmiisys"; > + reg = <0 0x10080000 0 0x1000>; > + clocks = <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>; > + resets = <&watchdog MT7988_TOPRGU_XFI0_GRST>; > + }; > + }; > -- > 2.43.0
diff --git a/Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml b/Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml new file mode 100644 index 0000000000000..0cdaa3545edb0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pcs/mediatek,usxgmii.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek USXGMII PCS + +maintainers: + - Daniel Golle <daniel@makrotopia.org> + +description: + The MediaTek USXGMII PCS provides physical link control and status + for USXGMII, 10GBase-R and 5GBase-R links on the SerDes interfaces + provided by the PEXTP PHY. + In order to also support legacy 2500Base-X, 1000Base-X and Cisco + SGMII an existing mediatek,*-sgmiisys LynxI PCS is wrapped to + provide those interfaces modes on the same SerDes interfaces shared + with the USXGMII PCS. + +properties: + $nodename: + pattern: "^pcs@[0-9a-f]+$" + + compatible: + const: mediatek,mt7988-usxgmiisys + + reg: + maxItems: 1 + + clocks: + items: + - description: USXGMII top-level clock + + resets: + items: + - description: XFI reset + +required: + - compatible + - reg + - clocks + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mediatek,mt7988-clk.h> + #define MT7988_TOPRGU_XFI0_GRST 12 + soc { + #address-cells = <2>; + #size-cells = <2>; + usxgmiisys0: pcs@10080000 { + compatible = "mediatek,mt7988-usxgmiisys"; + reg = <0 0x10080000 0 0x1000>; + clocks = <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>; + resets = <&watchdog MT7988_TOPRGU_XFI0_GRST>; + }; + };
MediaTek's USXGMII can be found in the MT7988 SoC. We need to access it in order to configure and monitor the Ethernet SerDes link in USXGMII, 10GBase-R and 5GBase-R mode. By including a wrapped legacy 1000Base-X/2500Base-X/Cisco SGMII LynxI PCS as well, those interface modes are also available. Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- .../bindings/net/pcs/mediatek,usxgmii.yaml | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml