mbox series

[v6,0/4] Add displays support for bsh-smm-s2/pro boards

Message ID 20231213140437.2769508-1-dario.binacchi@amarulasolutions.com (mailing list archive)
Headers show
Series Add displays support for bsh-smm-s2/pro boards | expand

Message

Dario Binacchi Dec. 13, 2023, 2:03 p.m. UTC 
The series adds drivers for the displays used by bsh-smm-s2/pro boards.
This required applying some patches to the samsung-dsim driver.

Changes in v6:
- Drop patches:
  - [06/10] drm/panel: Add Synaptics R63353 panel driver
  - [07/10] dt-bindings: display: panel: Add Ilitek ili9805 panel controller
  - [08/10] drm/panel: Add Ilitek ILI9805 panel driver
  - [09/10] drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panel
  Because applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
  Drop patches:
  - [01/10] drm/bridge: Fix bridge disable logic
  - [02/10] drm/bridge: Fix a use case in the bridge disable logic
  Because they are wrong

Changes in v3:
- Add 'Reviewed-by' tag of Krzysztof Kozlowski.
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.
- Squash patch [09/11] dt-bindings: ili9805: add compatible string for Tianma TM041XDHG01
  into [07/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller.

Changes in v2:
- Add $ref to panel-common.yaml
- Drop port, reset-gpios, and backlight
- Set port and backlight ad required
- Replace additionalProperties with unevaluatedProperties
- Adjust the mipi_dsi node based on the latest patches merged into
  the mainline in the dtsi files it includes.
- Added to the series the following patches:
  - 0001 drm/bridge: Fix bridge disable logic
  - 0002 drm/bridge: Fix a use case in the bridge disable logic
  - 0003 samsung-dsim: enter display mode in the enable() callback
  - 0004 drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Dario Binacchi (2):
  drm: bridge: samsung-dsim: enter display mode in the enable() callback
  drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Michael Trimarchi (2):
  dt-bindings: display: panel: Add synaptics r63353 panel controller
  arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup

 .../display/panel/synaptics,r63353.yaml       |  61 +++++++++
 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |   1 +
 .../freescale/imx8mn-bsh-smm-s2-display.dtsi  | 121 ++++++++++++++++++
 drivers/gpu/drm/bridge/samsung-dsim.c         |  14 +-
 4 files changed, 194 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi

Comments

Rob Herring (Arm) Dec. 13, 2023, 5:53 p.m. UTC | #1 
On Wed, Dec 13, 2023 at 03:03:41PM +0100, Dario Binacchi wrote:
> The series adds drivers for the displays used by bsh-smm-s2/pro boards.
> This required applying some patches to the samsung-dsim driver.
> 
> Changes in v6:
> - Drop patches:
>   - [06/10] drm/panel: Add Synaptics R63353 panel driver

The binding should have gone with this. I'll apply it then.

Rob
Neil Armstrong Dec. 13, 2023, 9:59 p.m. UTC | #2 
Le 13/12/2023 à 18:53, Rob Herring a écrit :
> On Wed, Dec 13, 2023 at 03:03:41PM +0100, Dario Binacchi wrote:
>> The series adds drivers for the displays used by bsh-smm-s2/pro boards.
>> This required applying some patches to the samsung-dsim driver.
>>
>> Changes in v6:
>> - Drop patches:
>>    - [06/10] drm/panel: Add Synaptics R63353 panel driver
> 
> The binding should have gone with this. I'll apply it then.
> 
> Rob

Oops I missed it,

Thanks for applying it

Neil