| Message ID | 20231211214054.570295-1-festevam@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: imx8qxp-mek: Move port under USB connector | expand |
On Mon, Dec 11, 2023 at 06:40:54PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <festevam@denx.de> > > Per nxp,ptn5110.yaml, 'port' should be placed under 'connector'. > > Do as requested to fix the following dt-schema warning: > > imx8qxp-mek.dtb: tcpc@50: connector:ports: 'port@0' is a required property > from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# > imx8qxp-mek.dtb: tcpc@50: connector: Unevaluated properties are not allowed ('ports' was unexpected) > from schema $id: http://devicetree.org/schemas/usb/nxp,ptn5110.yaml# > > Signed-off-by: Fabio Estevam <festevam@denx.de> > --- > arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 13 +++++++------ > 1 file changed, 7 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts > index 6c3d8715bc11..096f9501fa32 100644 > --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts > +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts > @@ -152,12 +152,6 @@ ptn5110: tcpc@50 { > interrupt-parent = <&lsio_gpio1>; > interrupts = <3 IRQ_TYPE_LEVEL_LOW>; > > - port { > - typec_dr_sw: endpoint { > - remote-endpoint = <&usb3_drd_sw>; > - }; > - }; > - > usb_con1: connector { > compatible = "usb-c-connector"; > label = "USB-C"; > @@ -169,6 +163,13 @@ ports { > #address-cells = <1>; > #size-cells = <0>; > > + port@0 { > + reg = <0>; Have a newline between properties and child node. Shawn > + typec_dr_sw: endpoint { > + remote-endpoint = <&usb3_drd_sw>; > + }; > + }; > + > port@1 { > reg = <1>; > typec_con_ss: endpoint { > -- > 2.34.1 >
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 6c3d8715bc11..096f9501fa32 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -152,12 +152,6 @@ ptn5110: tcpc@50 { interrupt-parent = <&lsio_gpio1>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - port { - typec_dr_sw: endpoint { - remote-endpoint = <&usb3_drd_sw>; - }; - }; - usb_con1: connector { compatible = "usb-c-connector"; label = "USB-C"; @@ -169,6 +163,13 @@ ports { #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + typec_dr_sw: endpoint { + remote-endpoint = <&usb3_drd_sw>; + }; + }; + port@1 { reg = <1>; typec_con_ss: endpoint {