| Message ID | 20231215073431.8512-1-chunfeng.yun@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue | expand |
On Fri, 2023-12-15 at 08:36 +0100, Krzysztof Kozlowski wrote: > > External email : Please do not click links or open attachments until > you have verified the sender or the content. > On 15/12/2023 08:34, Chunfeng Yun wrote: > > For Gen1 isoc-in endpoint on controller before about SSUSB IPM > v1.6.0, it > > still send out unexpected ACK after receiving a short packet in > burst > > transfer, this will cause an exception on connected device, > specially for > > a 4k camera. > > Add a quirk property "rx-fifo-depth" to work around this hardware > issue, > > prefer to use 2; > > The side-effect is that may cause performance drop about 10%, > including > > bulk transfer. > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > > --- > > v2: change 'mediatek,rxfifo-depth' to 'rx-fifo-depth' > > --- > > .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 12 > ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk- > xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk- > xhci.yaml > > index e9644e333d78..e44a71acb5c0 100644 > > --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml > > @@ -124,6 +124,18 @@ properties: > > defined in the xHCI spec on MTK's controller. > > default: 5000 > > > > + rx-fifo-depth: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + It is a quirk used to work around Gen1 isoc-in endpoint > transfer issue > > + that still send out unexpected ACK after device finish the > burst transfer > > + with a short packet and cause an exception, specially on a > 4K camera > > + device, it happens on controller before about IPM v1.6.0; > the side-effect > > + is that may cause performance drop about 10%, include bulk > transfer, > > + prefer to use 2 here. > > What is the meaning of 0-3? bytes? words? 0 - 1K bytes; 3 - 4K bytes; I will add this in description > > > + minimum: 0 > > + maximum: 3 > > > Best regards, > Krzysztof > >
On 20/12/2023 03:05, Chunfeng Yun (云春峰) wrote: > On Fri, 2023-12-15 at 08:36 +0100, Krzysztof Kozlowski wrote: >> >> External email : Please do not click links or open attachments until >> you have verified the sender or the content. >> On 15/12/2023 08:34, Chunfeng Yun wrote: >>> For Gen1 isoc-in endpoint on controller before about SSUSB IPM >> v1.6.0, it >>> still send out unexpected ACK after receiving a short packet in >> burst >>> transfer, this will cause an exception on connected device, >> specially for >>> a 4k camera. >>> Add a quirk property "rx-fifo-depth" to work around this hardware >> issue, >>> prefer to use 2; >>> The side-effect is that may cause performance drop about 10%, >> including >>> bulk transfer. >>> >>> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> >>> --- >>> v2: change 'mediatek,rxfifo-depth' to 'rx-fifo-depth' >>> --- >>> .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 12 >> ++++++++++++ >>> 1 file changed, 12 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk- >> xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk- >> xhci.yaml >>> index e9644e333d78..e44a71acb5c0 100644 >>> --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml >>> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml >>> @@ -124,6 +124,18 @@ properties: >>> defined in the xHCI spec on MTK's controller. >>> default: 5000 >>> >>> + rx-fifo-depth: >>> + $ref: /schemas/types.yaml#/definitions/uint32 >>> + description: >>> + It is a quirk used to work around Gen1 isoc-in endpoint >> transfer issue >>> + that still send out unexpected ACK after device finish the >> burst transfer >>> + with a short packet and cause an exception, specially on a >> 4K camera >>> + device, it happens on controller before about IPM v1.6.0; >> the side-effect >>> + is that may cause performance drop about 10%, include bulk >> transfer, >>> + prefer to use 2 here. >> >> What is the meaning of 0-3? bytes? words? > 0 - 1K bytes; > 3 - 4K bytes; > I will add this in description No, don't add. Just use correct values. 0 means 0 words or bytes. Not 1000 bytes. Best regards, Krzysztof
On Wed, 2023-12-20 at 08:25 +0100, Krzysztof Kozlowski wrote: > > External email : Please do not click links or open attachments until > you have verified the sender or the content. > On 20/12/2023 03:05, Chunfeng Yun (云春峰) wrote: > > On Fri, 2023-12-15 at 08:36 +0100, Krzysztof Kozlowski wrote: > >> > >> External email : Please do not click links or open attachments > until > >> you have verified the sender or the content. > >> On 15/12/2023 08:34, Chunfeng Yun wrote: > >>> For Gen1 isoc-in endpoint on controller before about SSUSB IPM > >> v1.6.0, it > >>> still send out unexpected ACK after receiving a short packet in > >> burst > >>> transfer, this will cause an exception on connected device, > >> specially for > >>> a 4k camera. > >>> Add a quirk property "rx-fifo-depth" to work around this hardware > >> issue, > >>> prefer to use 2; > >>> The side-effect is that may cause performance drop about 10%, > >> including > >>> bulk transfer. > >>> > >>> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > >>> --- > >>> v2: change 'mediatek,rxfifo-depth' to 'rx-fifo-depth' > >>> --- > >>> .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 12 > >> ++++++++++++ > >>> 1 file changed, 12 insertions(+) > >>> > >>> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk- > >> xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk- > >> xhci.yaml > >>> index e9644e333d78..e44a71acb5c0 100644 > >>> --- a/Documentation/devicetree/bindings/usb/mediatek,mtk- > xhci.yaml > >>> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk- > xhci.yaml > >>> @@ -124,6 +124,18 @@ properties: > >>> defined in the xHCI spec on MTK's controller. > >>> default: 5000 > >>> > >>> + rx-fifo-depth: > >>> + $ref: /schemas/types.yaml#/definitions/uint32 > >>> + description: > >>> + It is a quirk used to work around Gen1 isoc-in endpoint > >> transfer issue > >>> + that still send out unexpected ACK after device finish the > >> burst transfer > >>> + with a short packet and cause an exception, specially on a > >> 4K camera > >>> + device, it happens on controller before about IPM v1.6.0; > >> the side-effect > >>> + is that may cause performance drop about 10%, include bulk > >> transfer, > >>> + prefer to use 2 here. > >> > >> What is the meaning of 0-3? bytes? words? > > 0 - 1K bytes; > > 3 - 4K bytes; > > I will add this in description > > No, don't add. Just use correct values. 0 means 0 words or bytes. Not > 1000 bytes. Ok, I'll modify it; Thanks > > Best regards, > Krzysztof >
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml index e9644e333d78..e44a71acb5c0 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -124,6 +124,18 @@ properties: defined in the xHCI spec on MTK's controller. default: 5000 + rx-fifo-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + It is a quirk used to work around Gen1 isoc-in endpoint transfer issue + that still send out unexpected ACK after device finish the burst transfer + with a short packet and cause an exception, specially on a 4K camera + device, it happens on controller before about IPM v1.6.0; the side-effect + is that may cause performance drop about 10%, include bulk transfer, + prefer to use 2 here. + minimum: 0 + maximum: 3 + # the following properties are only used for case 1 wakeup-source: description: enable USB remote wakeup, see power/wakeup-source.txt
For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it still send out unexpected ACK after receiving a short packet in burst transfer, this will cause an exception on connected device, specially for a 4k camera. Add a quirk property "rx-fifo-depth" to work around this hardware issue, prefer to use 2; The side-effect is that may cause performance drop about 10%, including bulk transfer. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2: change 'mediatek,rxfifo-depth' to 'rx-fifo-depth' --- .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+)