| Message ID | 20231218064521.37324-2-xueshuai@linux.alibaba.com (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Headers | show |
| Series | [v10,1/4] ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events | expand |
On Mon, Dec 18, 2023 at 02:45:18PM +0800, Shuai Xue wrote: > There are two major types of uncorrected recoverable (UCR) errors : > > - Synchronous error: The error is detected and raised at the point of the > consumption in the execution flow, e.g. when a CPU tries to access > a poisoned cache line. The CPU will take a synchronous error exception > such as Synchronous External Abort (SEA) on Arm64 and Machine Check > Exception (MCE) on X86. OS requires to take action (for example, offline > failure page/kill failure thread) to recover this uncorrectable error. > > - Asynchronous error: The error is detected out of processor execution > context, e.g. when an error is detected by a background scrubber. Some data > in the memory are corrupted. But the data have not been consumed. OS is > optional to take action to recover this uncorrectable error. > > When APEI firmware first is enabled, a platform may describe one error > source for the handling of synchronous errors (e.g. MCE or SEA notification > ), or for handling asynchronous errors (e.g. SCI or External Interrupt > notification). In other words, we can distinguish synchronous errors by > APEI notification. For synchronous errors, kernel will kill the current > process which accessing the poisoned page by sending SIGBUS with > BUS_MCEERR_AR. In addition, for asynchronous errors, kernel will notify the > process who owns the poisoned page by sending SIGBUS with BUS_MCEERR_AO in > early kill mode. However, the GHES driver always sets mf_flags to 0 so that > all synchronous errors are handled as asynchronous errors in memory failure. > > To this end, set memory failure flags as MF_ACTION_REQUIRED on synchronous > events. > > Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> > Tested-by: Ma Wupeng <mawupeng1@huawei.com> > Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> > Reviewed-by: Xiaofei Tan <tanxiaofei@huawei.com> > Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> > Reviewed-by: James Morse <james.morse@arm.com> > --- > drivers/acpi/apei/ghes.c | 29 +++++++++++++++++++++++------ > 1 file changed, 23 insertions(+), 6 deletions(-) > <formletter> This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read: https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html for how to do this properly. </formletter>
On Mon, Dec 18, 2023 at 7:45 AM Shuai Xue <xueshuai@linux.alibaba.com> wrote: > > There are two major types of uncorrected recoverable (UCR) errors : > > - Synchronous error: The error is detected and raised at the point of the > consumption in the execution flow, e.g. when a CPU tries to access > a poisoned cache line. The CPU will take a synchronous error exception > such as Synchronous External Abort (SEA) on Arm64 and Machine Check > Exception (MCE) on X86. OS requires to take action (for example, offline > failure page/kill failure thread) to recover this uncorrectable error. > > - Asynchronous error: The error is detected out of processor execution > context, e.g. when an error is detected by a background scrubber. Some data > in the memory are corrupted. But the data have not been consumed. OS is > optional to take action to recover this uncorrectable error. > > When APEI firmware first is enabled, a platform may describe one error > source for the handling of synchronous errors (e.g. MCE or SEA notification > ), or for handling asynchronous errors (e.g. SCI or External Interrupt > notification). In other words, we can distinguish synchronous errors by > APEI notification. For synchronous errors, kernel will kill the current > process which accessing the poisoned page by sending SIGBUS with > BUS_MCEERR_AR. In addition, for asynchronous errors, kernel will notify the > process who owns the poisoned page by sending SIGBUS with BUS_MCEERR_AO in > early kill mode. However, the GHES driver always sets mf_flags to 0 so that > all synchronous errors are handled as asynchronous errors in memory failure. > > To this end, set memory failure flags as MF_ACTION_REQUIRED on synchronous > events. > > Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> > Tested-by: Ma Wupeng <mawupeng1@huawei.com> > Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> > Reviewed-by: Xiaofei Tan <tanxiaofei@huawei.com> > Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> > Reviewed-by: James Morse <james.morse@arm.com> Applied as 6.8 material. The other patches in the series still need to receive tags from the APEI designated reviewers (as per MAINTAINERS). Thanks! > --- > drivers/acpi/apei/ghes.c | 29 +++++++++++++++++++++++------ > 1 file changed, 23 insertions(+), 6 deletions(-) > > diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c > index 63ad0541db38..ab2a82cb1b0b 100644 > --- a/drivers/acpi/apei/ghes.c > +++ b/drivers/acpi/apei/ghes.c > @@ -101,6 +101,20 @@ static inline bool is_hest_type_generic_v2(struct ghes *ghes) > return ghes->generic->header.type == ACPI_HEST_TYPE_GENERIC_ERROR_V2; > } > > +/* > + * A platform may describe one error source for the handling of synchronous > + * errors (e.g. MCE or SEA), or for handling asynchronous errors (e.g. SCI > + * or External Interrupt). On x86, the HEST notifications are always > + * asynchronous, so only SEA on ARM is delivered as a synchronous > + * notification. > + */ > +static inline bool is_hest_sync_notify(struct ghes *ghes) > +{ > + u8 notify_type = ghes->generic->notify.type; > + > + return notify_type == ACPI_HEST_NOTIFY_SEA; > +} > + > /* > * This driver isn't really modular, however for the time being, > * continuing to use module_param is the easiest way to remain > @@ -489,7 +503,7 @@ static bool ghes_do_memory_failure(u64 physical_addr, int flags) > } > > static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, > - int sev) > + int sev, bool sync) > { > int flags = -1; > int sec_sev = ghes_severity(gdata->error_severity); > @@ -503,7 +517,7 @@ static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, > (gdata->flags & CPER_SEC_ERROR_THRESHOLD_EXCEEDED)) > flags = MF_SOFT_OFFLINE; > if (sev == GHES_SEV_RECOVERABLE && sec_sev == GHES_SEV_RECOVERABLE) > - flags = 0; > + flags = sync ? MF_ACTION_REQUIRED : 0; > > if (flags != -1) > return ghes_do_memory_failure(mem_err->physical_addr, flags); > @@ -511,9 +525,11 @@ static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, > return false; > } > > -static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata, int sev) > +static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata, > + int sev, bool sync) > { > struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata); > + int flags = sync ? MF_ACTION_REQUIRED : 0; > bool queued = false; > int sec_sev, i; > char *p; > @@ -538,7 +554,7 @@ static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata, int s > * and don't filter out 'corrected' error here. > */ > if (is_cache && has_pa) { > - queued = ghes_do_memory_failure(err_info->physical_fault_addr, 0); > + queued = ghes_do_memory_failure(err_info->physical_fault_addr, flags); > p += err_info->length; > continue; > } > @@ -666,6 +682,7 @@ static bool ghes_do_proc(struct ghes *ghes, > const guid_t *fru_id = &guid_null; > char *fru_text = ""; > bool queued = false; > + bool sync = is_hest_sync_notify(ghes); > > sev = ghes_severity(estatus->error_severity); > apei_estatus_for_each_section(estatus, gdata) { > @@ -683,13 +700,13 @@ static bool ghes_do_proc(struct ghes *ghes, > atomic_notifier_call_chain(&ghes_report_chain, sev, mem_err); > > arch_apei_report_mem_error(sev, mem_err); > - queued = ghes_handle_memory_failure(gdata, sev); > + queued = ghes_handle_memory_failure(gdata, sev, sync); > } > else if (guid_equal(sec_type, &CPER_SEC_PCIE)) { > ghes_handle_aer(gdata); > } > else if (guid_equal(sec_type, &CPER_SEC_PROC_ARM)) { > - queued = ghes_handle_arm_hw_error(gdata, sev); > + queued = ghes_handle_arm_hw_error(gdata, sev, sync); > } else { > void *err = acpi_hest_get_payload(gdata); > > -- > 2.39.3 >
On 2023/12/21 21:55, Rafael J. Wysocki wrote: > On Mon, Dec 18, 2023 at 7:45 AM Shuai Xue <xueshuai@linux.alibaba.com> wrote: >> >> There are two major types of uncorrected recoverable (UCR) errors : >> >> - Synchronous error: The error is detected and raised at the point of the >> consumption in the execution flow, e.g. when a CPU tries to access >> a poisoned cache line. The CPU will take a synchronous error exception >> such as Synchronous External Abort (SEA) on Arm64 and Machine Check >> Exception (MCE) on X86. OS requires to take action (for example, offline >> failure page/kill failure thread) to recover this uncorrectable error. >> >> - Asynchronous error: The error is detected out of processor execution >> context, e.g. when an error is detected by a background scrubber. Some data >> in the memory are corrupted. But the data have not been consumed. OS is >> optional to take action to recover this uncorrectable error. >> >> When APEI firmware first is enabled, a platform may describe one error >> source for the handling of synchronous errors (e.g. MCE or SEA notification >> ), or for handling asynchronous errors (e.g. SCI or External Interrupt >> notification). In other words, we can distinguish synchronous errors by >> APEI notification. For synchronous errors, kernel will kill the current >> process which accessing the poisoned page by sending SIGBUS with >> BUS_MCEERR_AR. In addition, for asynchronous errors, kernel will notify the >> process who owns the poisoned page by sending SIGBUS with BUS_MCEERR_AO in >> early kill mode. However, the GHES driver always sets mf_flags to 0 so that >> all synchronous errors are handled as asynchronous errors in memory failure. >> >> To this end, set memory failure flags as MF_ACTION_REQUIRED on synchronous >> events. >> >> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> >> Tested-by: Ma Wupeng <mawupeng1@huawei.com> >> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> >> Reviewed-by: Xiaofei Tan <tanxiaofei@huawei.com> >> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> >> Reviewed-by: James Morse <james.morse@arm.com> > > Applied as 6.8 material. > > The other patches in the series still need to receive tags from the > APEI designated reviewers (as per MAINTAINERS). > > Thanks! > Thank you :) I will wait more feedback of other patches from MAINTAINERS. Cheers, Shuai
diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index 63ad0541db38..ab2a82cb1b0b 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -101,6 +101,20 @@ static inline bool is_hest_type_generic_v2(struct ghes *ghes) return ghes->generic->header.type == ACPI_HEST_TYPE_GENERIC_ERROR_V2; } +/* + * A platform may describe one error source for the handling of synchronous + * errors (e.g. MCE or SEA), or for handling asynchronous errors (e.g. SCI + * or External Interrupt). On x86, the HEST notifications are always + * asynchronous, so only SEA on ARM is delivered as a synchronous + * notification. + */ +static inline bool is_hest_sync_notify(struct ghes *ghes) +{ + u8 notify_type = ghes->generic->notify.type; + + return notify_type == ACPI_HEST_NOTIFY_SEA; +} + /* * This driver isn't really modular, however for the time being, * continuing to use module_param is the easiest way to remain @@ -489,7 +503,7 @@ static bool ghes_do_memory_failure(u64 physical_addr, int flags) } static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, - int sev) + int sev, bool sync) { int flags = -1; int sec_sev = ghes_severity(gdata->error_severity); @@ -503,7 +517,7 @@ static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, (gdata->flags & CPER_SEC_ERROR_THRESHOLD_EXCEEDED)) flags = MF_SOFT_OFFLINE; if (sev == GHES_SEV_RECOVERABLE && sec_sev == GHES_SEV_RECOVERABLE) - flags = 0; + flags = sync ? MF_ACTION_REQUIRED : 0; if (flags != -1) return ghes_do_memory_failure(mem_err->physical_addr, flags); @@ -511,9 +525,11 @@ static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata, return false; } -static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata, int sev) +static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata, + int sev, bool sync) { struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata); + int flags = sync ? MF_ACTION_REQUIRED : 0; bool queued = false; int sec_sev, i; char *p; @@ -538,7 +554,7 @@ static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata, int s * and don't filter out 'corrected' error here. */ if (is_cache && has_pa) { - queued = ghes_do_memory_failure(err_info->physical_fault_addr, 0); + queued = ghes_do_memory_failure(err_info->physical_fault_addr, flags); p += err_info->length; continue; } @@ -666,6 +682,7 @@ static bool ghes_do_proc(struct ghes *ghes, const guid_t *fru_id = &guid_null; char *fru_text = ""; bool queued = false; + bool sync = is_hest_sync_notify(ghes); sev = ghes_severity(estatus->error_severity); apei_estatus_for_each_section(estatus, gdata) { @@ -683,13 +700,13 @@ static bool ghes_do_proc(struct ghes *ghes, atomic_notifier_call_chain(&ghes_report_chain, sev, mem_err); arch_apei_report_mem_error(sev, mem_err); - queued = ghes_handle_memory_failure(gdata, sev); + queued = ghes_handle_memory_failure(gdata, sev, sync); } else if (guid_equal(sec_type, &CPER_SEC_PCIE)) { ghes_handle_aer(gdata); } else if (guid_equal(sec_type, &CPER_SEC_PROC_ARM)) { - queued = ghes_handle_arm_hw_error(gdata, sev); + queued = ghes_handle_arm_hw_error(gdata, sev, sync); } else { void *err = acpi_hest_get_payload(gdata);