| Message ID | 20231221-ufs-reset-ensure-effect-before-delay-v3-4-2195a1b66d2e@redhat.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | scsi: ufs: Remove overzealous memory barriers | expand |
On 12/22/2023 3:09 AM, Andrew Halaney wrote: > Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to > ensure that completes before continuing. > > mb() ensure that the write completes, but completion doesn't mean that > it isn't stored in a buffer somewhere. The recommendation for > ensuring this bit has taken effect on the device is to perform a read > back to force it to make it all the way to the device. This is > documented in device-io.rst and a talk by Will Deacon on this can > be seen over here: > > https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 > > Let's do that to ensure the bit hits the device. Because the mb()'s > purpose wasn't to add extra ordering (on top of the ordering guaranteed > by writel()/readl()), it can safely be removed. > > Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") > Signed-off-by: Andrew Halaney <ahalaney@redhat.com> > --- > drivers/ufs/host/ufs-qcom.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c > index 6df2ab3b6f23..ab1ff7432d11 100644 > --- a/drivers/ufs/host/ufs-qcom.c > +++ b/drivers/ufs/host/ufs-qcom.c > @@ -280,7 +280,7 @@ static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host) > ufshcd_rmwl(host->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0); > > /* make sure above configuration is applied before we return */ > - mb(); > + ufshcd_readl(host->hba, REG_UFS_CFG1); nit: please also add the dummy read comment line to avoid confusions. > } > > /* > With above addressed, Reviewed-by: Can Guo <quic_cang@quicinc.com> Thanks, Can Guo.
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 6df2ab3b6f23..ab1ff7432d11 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -280,7 +280,7 @@ static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host) ufshcd_rmwl(host->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0); /* make sure above configuration is applied before we return */ - mb(); + ufshcd_readl(host->hba, REG_UFS_CFG1); } /*
Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to ensure that completes before continuing. mb() ensure that the write completes, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring this bit has taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 Let's do that to ensure the bit hits the device. Because the mb()'s purpose wasn't to add extra ordering (on top of the ordering guaranteed by writel()/readl()), it can safely be removed. Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> --- drivers/ufs/host/ufs-qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)