@@ -2497,25 +2497,43 @@ static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
.fifosize = { 256, 64, 64, 64 },
};
-/*
- * Common drv_data struct for platforms that specify samsung,uart-fifosize in
- * device tree.
- */
-static const struct s3c24xx_serial_drv_data exynos_fifoszdt_serial_drv_data = {
- EXYNOS_COMMON_SERIAL_DRV_DATA(),
+static const struct s3c24xx_serial_drv_data gs101_serial_drv_data = {
+ .info = {
+ .name = "Google GS101 UART",
+ .type = TYPE_S3C6400,
+ .port_type = PORT_S3C6400,
+ .iotype = UPIO_MEM32,
+ .has_divslot = 1,
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK,
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL,
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL,
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK,
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 1,
+ .clksel_mask = 0,
+ .clksel_shift = 0,
+ },
+ .def_cfg = {
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ .has_fracval = 1,
+ },
+ /* samsung,uart-fifosize must be specified in the device tree. */
.fifosize = { 0 },
};
#define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
#define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
#define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
-#define EXYNOS_FIFOSZDT_DRV_DATA (&exynos_fifoszdt_serial_drv_data)
+#define GS101_SERIAL_DRV_DATA (&gs101_serial_drv_data)
#else
#define EXYNOS4210_SERIAL_DRV_DATA NULL
#define EXYNOS5433_SERIAL_DRV_DATA NULL
#define EXYNOS850_SERIAL_DRV_DATA NULL
-#define EXYNOS_FIFOSZDT_DRV_DATA NULL
+#define GS101_SERIAL_DRV_DATA NULL
#endif
#ifdef CONFIG_ARCH_APPLE
@@ -2603,7 +2621,7 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
.driver_data = (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA,
}, {
.name = "gs101-uart",
- .driver_data = (kernel_ulong_t)EXYNOS_FIFOSZDT_DRV_DATA,
+ .driver_data = (kernel_ulong_t)GS101_SERIAL_DRV_DATA,
},
{ },
};
@@ -2626,7 +2644,7 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
{ .compatible = "axis,artpec8-uart",
.data = ARTPEC8_SERIAL_DRV_DATA },
{ .compatible = "google,gs101-uart",
- .data = EXYNOS_FIFOSZDT_DRV_DATA },
+ .data = GS101_SERIAL_DRV_DATA },
{},
};
MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
GS101's Connectivity Peripheral blocks (peric0/1 blocks) which include the I3C and USI (I2C, SPI, UART) only allow 32-bit register accesses. Instead of specifying the reg-io-width = 4 everywhere, for each node, the requirement should be deduced from the compatible. Infer UPIO_MEM32 iotype from the "google,gs101-uart" compatible. Update the uart info name to be GS101 specific in order to differentiate from the other exynos platforms. All the other settings are not changed. exynos_fifoszdt_serial_drv_data was replaced by gs101_serial_drv_data because the iotype restriction is gs101 specific and there was no other user of exynos_fifoszdt_serial_drv_data. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> --- v2: new patch drivers/tty/serial/samsung_tty.c | 38 +++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 10 deletions(-)