@@ -1122,6 +1122,64 @@ static int ath12k_mac_op_config(struct ieee80211_hw *hw, u32 changed)
return ret;
}
+static int ath12k_mac_setup_bcn_p2p_ie(struct ath12k_vif *arvif,
+ struct sk_buff *bcn)
+{
+ struct ath12k *ar = arvif->ar;
+ struct ieee80211_mgmt *mgmt;
+ const u8 *p2p_ie;
+ int ret;
+
+ mgmt = (void *)bcn->data;
+ p2p_ie = cfg80211_find_vendor_ie(WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
+ mgmt->u.beacon.variable,
+ bcn->len - (mgmt->u.beacon.variable -
+ bcn->data));
+ if (!p2p_ie) {
+ ath12k_warn(ar->ab, "no P2P ie found in beacon\n");
+ return -ENOENT;
+ }
+
+ ret = ath12k_wmi_p2p_go_bcn_ie(ar, arvif->vdev_id, p2p_ie);
+ if (ret) {
+ ath12k_warn(ar->ab, "failed to submit P2P GO bcn ie for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath12k_mac_remove_vendor_ie(struct sk_buff *skb, unsigned int oui,
+ u8 oui_type, size_t ie_offset)
+{
+ size_t len;
+ const u8 *next;
+ const u8 *end;
+ u8 *ie;
+
+ if (WARN_ON(skb->len < ie_offset))
+ return -EINVAL;
+
+ ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type,
+ skb->data + ie_offset,
+ skb->len - ie_offset);
+ if (!ie)
+ return -ENOENT;
+
+ len = ie[1] + 2;
+ end = skb->data + skb->len;
+ next = ie + len;
+
+ if (WARN_ON(next > end))
+ return -EINVAL;
+
+ memmove(ie, next, end - next);
+ skb_trim(skb, skb->len - len);
+
+ return 0;
+}
+
static int ath12k_mac_setup_bcn_tmpl(struct ath12k_vif *arvif)
{
struct ath12k *ar = arvif->ar;
@@ -1154,14 +1212,37 @@ static int ath12k_mac_setup_bcn_tmpl(struct ath12k_vif *arvif)
ies, (skb_tail_pointer(bcn) - ies)))
arvif->wpaie_present = true;
- ret = ath12k_wmi_bcn_tmpl(ar, arvif->vdev_id, &offs, bcn);
+ if (arvif->vif->type == NL80211_IFTYPE_AP && arvif->vif->p2p) {
+ ret = ath12k_mac_setup_bcn_p2p_ie(arvif, bcn);
+ if (ret) {
+ ath12k_warn(ab, "failed to setup P2P GO bcn ie: %d\n",
+ ret);
+ goto free_bcn_skb;
+ }
- kfree_skb(bcn);
+ /* P2P IE is inserted by firmware automatically (as
+ * configured above) so remove it from the base beacon
+ * template to avoid duplicate P2P IEs in beacon frames.
+ */
+ ret = ath12k_mac_remove_vendor_ie(bcn, WLAN_OUI_WFA,
+ WLAN_OUI_TYPE_WFA_P2P,
+ offsetof(struct ieee80211_mgmt,
+ u.beacon.variable));
+ if (ret) {
+ ath12k_warn(ab, "failed to remove P2P vendor ie: %d\n",
+ ret);
+ goto free_bcn_skb;
+ }
+ }
+
+ ret = ath12k_wmi_bcn_tmpl(ar, arvif->vdev_id, &offs, bcn);
if (ret)
ath12k_warn(ab, "failed to submit beacon template command: %d\n",
ret);
+free_bcn_skb:
+ kfree_skb(bcn);
return ret;
}
@@ -1710,6 +1710,44 @@ int ath12k_wmi_send_bcn_offload_control_cmd(struct ath12k *ar,
return ret;
}
+int ath12k_wmi_p2p_go_bcn_ie(struct ath12k *ar, u32 vdev_id,
+ const u8 *p2p_ie)
+{
+ struct ath12k_wmi_pdev *wmi = ar->wmi;
+ struct wmi_p2p_go_set_beacon_ie_cmd *cmd;
+ struct wmi_tlv *tlv;
+ struct sk_buff *skb;
+ void *ptr;
+ int ret, len;
+ size_t p2p_ie_len = p2p_ie[1] + 2;
+
+ len = sizeof(*cmd) + TLV_HDR_SIZE + aligned_len;
+
+ skb = ath12k_wmi_alloc_skb(wmi->wmi_ab, len);
+ if (!skb)
+ return -ENOMEM;
+ ptr = skb->data;
+ cmd = ptr;
+ cmd->tlv_header = ath12k_wmi_tlv_cmd_hdr(WMI_TAG_P2P_GO_SET_BEACON_IE,
+ sizeof(*cmd));
+ cmd->vdev_id = cpu_to_le32(vdev_id);
+ cmd->ie_buf_len = cpu_to_le32(p2p_ie_len);
+
+ ptr = skb->data + sizeof(*cmd);
+ tlv = ptr;
+ tlv->header = ath12k_wmi_tlv_cmd_hdr(WMI_TAG_ARRAY_BYTE,
+ roundup(p2p_ie_len, sizeof(u32)));
+ memcpy(tlv->value, p2p_ie, p2p_ie_len);
+
+ ret = ath12k_wmi_cmd_send(wmi, skb, WMI_P2P_GO_SET_BEACON_IE);
+ if (ret) {
+ ath12k_warn(ar->ab, "failed to send WMI_P2P_GO_SET_BEACON_IE\n");
+ dev_kfree_skb(skb);
+ }
+
+ return ret;
+}
+
int ath12k_wmi_bcn_tmpl(struct ath12k *ar, u32 vdev_id,
struct ieee80211_mutable_offsets *offs,
struct sk_buff *bcn)
@@ -3503,6 +3503,12 @@ struct wmi_bcn_tmpl_cmd {
__le32 esp_ie_offset;
} __packed;
+struct wmi_p2p_go_set_beacon_ie_cmd {
+ __le32 tlv_header;
+ __le32 vdev_id;
+ __le32 ie_buf_len;
+} __packed;
+
struct wmi_vdev_install_key_cmd {
__le32 tlv_header;
__le32 vdev_id;
@@ -4806,6 +4812,8 @@ int ath12k_wmi_cmd_send(struct ath12k_wmi_pdev *wmi, struct sk_buff *skb,
struct sk_buff *ath12k_wmi_alloc_skb(struct ath12k_wmi_base *wmi_sc, u32 len);
int ath12k_wmi_mgmt_send(struct ath12k *ar, u32 vdev_id, u32 buf_id,
struct sk_buff *frame);
+int ath12k_wmi_p2p_go_bcn_ie(struct ath12k *ar, u32 vdev_id,
+ const u8 *p2p_ie);
int ath12k_wmi_bcn_tmpl(struct ath12k *ar, u32 vdev_id,
struct ieee80211_mutable_offsets *offs,
struct sk_buff *bcn);
P2P Element is a necessary component of P2P protocol communication. It contains the Vendor Specific Information Element which includes the WFA OUI and an OUI Type indicating P2P. Add P2P IE in beacon template, and implement WMI interface for it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> --- drivers/net/wireless/ath/ath12k/mac.c | 85 ++++++++++++++++++++++++++- drivers/net/wireless/ath/ath12k/wmi.c | 38 ++++++++++++ drivers/net/wireless/ath/ath12k/wmi.h | 8 +++ 3 files changed, 129 insertions(+), 2 deletions(-)