@@ -82,6 +82,23 @@ struct sm501_devdata {
unsigned int rev;
};
+enum prop_type {
+ PROP_NUM, PROP_STR,
+};
+
+enum val_type {
+ ENDIS, MT_EX, MT_XC, MT_SSM, MT_SM, MT_DEBUG, MT_DIV, MT_USB, MT_DELAY,
+ MC_PAD, MC_USBCLK, MC_SSP, MC_FP, MC_FREQ, MC_REFRESH, MC_HOLD, MC_SH,
+ MC_II, MC_GAP, MC_DAC, MC_MC, MC_BL, MC_USB, MC_LB, MC_VR,
+};
+
+struct sm501_config_props {
+ char *name;
+ u32 shift;
+ u32 width;
+ enum prop_type prop_type;
+ enum val_type val_type;
+};
#define MHZ (1000 * 1000)
@@ -1370,6 +1387,419 @@ static int sm501_init_dev(struct sm501_devdata *sm)
return 0;
}
+static u32 lookup_str(const char *val, const char * const *list)
+{
+ u32 ret = 0;
+
+ while (*list) {
+ if (strcmp(val, *list) == 0)
+ return ret;
+ list++;
+ ret++;
+ }
+ return ~0;
+}
+
+static u32 lookup_num(u32 val, const u32 *list)
+{
+ u32 ret = 0;
+
+ while (*list != ~0) {
+ if (val == *list)
+ return ret;
+ list++;
+ ret++;
+ }
+ return ~0;
+}
+
+static const struct sm501_config_props misc_timming[] = {
+ {"ex", 28, 4, PROP_NUM, MT_EX},
+ {"xc", 24, 2, PROP_STR, MT_XC},
+ {"us", 23, 1, PROP_STR, ENDIS},
+ {"ssm1", 20, 1, PROP_STR, MT_SSM},
+ {"sm1", 16, 4, PROP_NUM, MT_SM},
+ {"ssm0", 12, 1, PROP_STR, MT_SSM},
+ {"sm0", 8, 4, PROP_NUM, MT_SM},
+ {"deb", 7, 1, PROP_STR, MT_DEBUG},
+ {"acpi", 6, 1, PROP_STR, ENDIS},
+ {"divider", 4, 2, PROP_NUM, MT_DIV},
+ {"usb-mode", 3, 1, PROP_STR, MT_USB},
+ {"delay", 0, 3, PROP_NUM, MT_DELAY},
+ {},
+};
+
+static const struct sm501_config_props misc_control[] = {
+ {"pad", 30, 2, PROP_NUM, MC_PAD},
+ {"usbclk", 28, 2, PROP_STR, MC_USBCLK},
+ {"uart-ssp", 27, 1, PROP_STR, MC_SSP},
+ {"lat", 26, 1, PROP_STR, ENDIS},
+ {"fp", 25, 1, PROP_NUM, MC_FP},
+ {"freq", 24, 1, PROP_NUM, MC_FREQ},
+ {"refresh", 21, 2, PROP_NUM, MC_REFRESH},
+ {"hold", 18, 3, PROP_NUM, MC_HOLD},
+ {"sh", 17, 1, PROP_STR, MC_SH},
+ {"ii", 16, 1, PROP_STR, MC_II},
+ {"pll", 15, 1, PROP_STR, ENDIS},
+ {"gap", 13, 2, PROP_STR, MC_GAP},
+ {"dac", 12, 1, PROP_STR, MC_DAC},
+ {"mc", 11, 1, PROP_STR, MC_MC},
+ {"bl", 10, 1, PROP_NUM, MC_BL},
+ {"usb", 9, 1, PROP_STR, MC_USB},
+ {"lb", 8, 1, PROP_STR, MC_LB},
+ {"vr", 4, 1, PROP_NUM, MC_VR},
+ {},
+};
+
+/* Read configuration values */
+static void sm501_of_read_config(struct device *dev, struct device_node *np,
+ const char *prefix,
+ const struct sm501_config_props *props,
+ struct sm501_reg_init *ret)
+{
+ static const char * const endis[] = { "disable", "enable", NULL };
+ static const char * const xc[] = { "internal-pll", "hclk", "gpio33", NULL };
+ static const char * const ssm[] = { "288mhz", "div", NULL };
+ static const char * const debmode[] = { "input-reference", "output", NULL };
+ static const char * const usbmode[] = { "normal", "simulation", NULL };
+ static const char * const usbclk[] = { "crystal", "-", "96mhz", "48mhz", NULL };
+ static const char * const ssp[] = { "uart1", "ssp1", NULL };
+ static const char * const sh_ready[] = { "active-low", "active-high", NULL };
+ static const char * const int_invert[] = { "normal", "invert", NULL };
+ static const char * const slave[] = { "cpu", "8051", NULL };
+ static const char * const usbport[] = { "master", "slave", NULL };
+ static const char * const usbloop[] = { "normal", "loopback", NULL };
+
+ static const u32 divrate[] = { 336, 288, 240, 192, ~0 };
+ static const u32 fpdata[] = { 18, 24, ~0 };
+ static const u32 cfreq[] = { 24, 12, ~0 };
+ static const u32 bushold[] = { 0, 8, 16, 24, 32, ~0 };
+ static const u32 burst[] = { 8, 1, ~0 };
+ static const u32 vrmem[] = { 30, 62, ~0 };
+
+ struct device_node *child;
+ const char *sval;
+ u32 mask;
+ u32 val;
+ int err;
+
+ ret->mask = ~0;
+ ret->set = 0;
+
+ child = of_get_child_by_name(np, prefix);
+ if (!child)
+ return;
+
+ while (props->name) {
+ switch (props->prop_type) {
+ case PROP_NUM:
+ err = of_property_read_u32(child, props->name, &val);
+ break;
+ case PROP_STR:
+ err = of_property_read_string(child, props->name, &sval);
+ break;
+ }
+ if (!err) {
+ switch (props->val_type) {
+ case ENDIS:
+ val = lookup_str(sval, endis);
+ break;
+ case MT_EX:
+ val /= 16;
+ break;
+ case MT_XC:
+ val = lookup_str(sval, xc);
+ break;
+ case MT_SSM:
+ val = lookup_str(sval, ssm);
+ break;
+ case MT_SM:
+ if ((val % 3) == 0) {
+ val /= 3;
+ val = ffs(val);
+ val += 8;
+ } else {
+ val = ffs(val);
+ }
+ break;
+ case MT_DEBUG:
+ val = lookup_str(sval, debmode);
+ break;
+ case MT_DIV:
+ val = lookup_num(val, divrate);
+ break;
+ case MT_USB:
+ val = lookup_str(sval, usbmode);
+ break;
+ case MT_DELAY:
+ val /= 5;
+ break;
+ case MC_PAD:
+ val /= 8;
+ val = 2 - val;
+ break;
+ case MC_USBCLK:
+ val = lookup_str(sval, usbclk);
+ break;
+ case MC_SSP:
+ val = lookup_str(sval, ssp);
+ break;
+ case MC_FP:
+ val = lookup_num(val, fpdata);
+ break;
+ case MC_FREQ:
+ val = lookup_num(val, cfreq);
+ break;
+ case MC_REFRESH:
+ val = ffs(val) - 3;
+ break;
+ case MC_HOLD:
+ val = lookup_num(val, bushold);
+ break;
+ case MC_SH:
+ val = lookup_str(sval, sh_ready);
+ break;
+ case MC_II:
+ val = lookup_str(sval, int_invert);
+ break;
+ case MC_GAP:
+ if (!strcmp(sval, "default"))
+ val = 0;
+ else
+ val = ~0;
+ break;
+ case MC_DAC:
+ val = lookup_str(sval, endis) ^ 1;
+ break;
+ case MC_MC:
+ val = lookup_str(sval, slave);
+ break;
+ case MC_BL:
+ val = lookup_num(val, burst);
+ break;
+ case MC_USB:
+ val = lookup_str(sval, usbport);
+ break;
+ case MC_LB:
+ val = lookup_str(sval, usbloop);
+ break;
+ case MC_VR:
+ val = lookup_num(val, vrmem);
+ break;
+ }
+ mask = (1 << props->width) - 1;
+ if (mask >= val) {
+ mask = ~(mask << props->shift);
+ ret->mask &= mask;
+ ret->set |= val << props->shift;
+ } else {
+ switch (props->prop_type) {
+ case PROP_NUM:
+ dev_warn(dev, "%s invalid value %d",
+ props->name, val);
+
+ break;
+ case PROP_STR:
+ dev_warn(dev, "%s invalid value %s",
+ props->name, sval);
+ break;
+ }
+ }
+ }
+ props++;
+ }
+}
+
+/* Read GPIO control */
+/*
+ * DT example.
+ * gpio-pin-control {
+ * pin@0 {
+ * gpio-port;
+ * };
+ * pin@1 {
+ * function;
+ * };
+ * };
+ */
+static void sm501_of_read_gpio(struct device *dev, struct device_node *np,
+ struct sm501_reg_init *hi, struct sm501_reg_init *low)
+{
+ struct device_node *gpio_group, *pin;
+ const char *prop_mode;
+ unsigned int pin_no;
+ int mode;
+ u64 mask;
+ u64 set;
+
+ mask = ~0;
+ set = 0;
+ gpio_group = of_get_child_by_name(np, "gpio-pin-control");
+ if (gpio_group) {
+ for_each_child_of_node(gpio_group, pin) {
+ mode = -1;
+ if (sscanf(pin->full_name, "pin@%u", &pin_no) == 1) {
+ if (of_property_read_bool(pin, "gpio-port"))
+ mode = 0;
+ else if (of_property_read_bool(pin, "function"))
+ mode = 1;
+ }
+ /* GPIO0 - 47 and 55 -63 */
+ if (mode < 0 ||
+ (pin_no >= 64 || (pin_no >= 48 && pin_no <= 54))) {
+ dev_warn(dev,
+ "%s mode %s is invalid.", pin->name, prop_mode);
+ } else {
+ mask &= ~(1 << pin_no);
+ set |= mode << pin_no;
+ }
+ }
+ }
+ hi->set = set >> 32;
+ low->set = set & 0xffffffff;
+ hi->mask = mask >> 32;
+ low->mask = mask & 0xffffffff;
+}
+
+static inline int read_i2c_prop(struct device *dev, struct device_node *child,
+ const char *name, u32 *val)
+{
+ if (of_property_read_u32(child, name, val)) {
+ dev_warn(dev, "%s/%s not found. skip it.", of_node_full_name(child), name);
+ return -ENOENT;
+ }
+ return 0;
+}
+
+/* Read GPIO I2C configuration */
+/*
+ * DT example.
+ * gpio-i2c {
+ * i2c@0 {
+ * sda = <gpio-pin>;
+ * scl = <gpio-pin>;
+ * delay = <delay>;
+ * timeout = <timeout>;
+ * };
+ * i2c@1 {
+ * :
+ * };
+ * :
+ * };
+ */
+static int sm501_parse_dt_gpio_i2c(struct device *dev, struct sm501_platdata *plat,
+ struct device_node *np)
+{
+ struct device_node *i2c_group, *child;
+ unsigned int i;
+ u32 i2c_nr;
+ int err;
+
+ i2c_group = of_get_child_by_name(np, "gpio-i2c");
+ if (!i2c_group)
+ return 0;
+
+ i2c_nr = of_get_child_count(i2c_group);
+ plat->gpio_i2c = devm_kzalloc(dev, sizeof(*plat->gpio_i2c) * i2c_nr,
+ GFP_KERNEL);
+ if (!plat->gpio_i2c)
+ return -ENOMEM;
+
+ plat->gpio_i2c_nr = i2c_nr;
+ i = 0;
+ for_each_child_of_node(i2c_group, child) {
+ u32 bus;
+
+ if (sscanf(child->full_name, "i2c@%u", &bus) != 1) {
+ dev_warn(dev, "Unknown address %s\n", child->name);
+ continue;
+ }
+
+ err = 0;
+ plat->gpio_i2c[i].bus_num = bus;
+ err += read_i2c_prop(dev, child, "sda", &plat->gpio_i2c[i].pin_sda);
+ err += read_i2c_prop(dev, child, "scl", &plat->gpio_i2c[i].pin_scl);
+ err += read_i2c_prop(dev, child, "delay", &plat->gpio_i2c[i].udelay);
+ err += read_i2c_prop(dev, child, "timeout", &plat->gpio_i2c[i].timeout);
+ if (err == 0)
+ i++;
+ }
+
+ return 0;
+}
+
+/* Read device functions */
+static u32 sm501_read_devices(struct device *dev, struct device_node *np)
+{
+ static const char * const funcname[] = {
+ "usb-host", "usb-slave", "ssp0", "ssp1",
+ "uart0", "uart1", "fbaccel", "ac97",
+ "i2s", "gpio",
+ };
+ struct property *prop;
+ unsigned int i;
+ const char *s;
+ u32 ret = 0;
+
+ of_property_for_each_string(np, "smi,devices", prop, s) {
+ for (i = 0; i < ARRAY_SIZE(funcname); i++) {
+ if (strcmp(s, funcname[i]) == 0) {
+ ret |= 1 << i;
+ goto next;
+ }
+ }
+ dev_warn(dev, "Unknown device function '%s'", s);
+next:
+ }
+ if (!ret)
+ dev_warn(dev, "devices not defined. disable all functions.");
+ return ret;
+}
+
+/* Build platform_data from OF property */
+struct plat_dt {
+ struct sm501_platdata plat;
+ struct sm501_initdata init;
+};
+
+static int sm501_parse_dt(struct sm501_devdata *sm, struct device_node *np)
+{
+ struct sm501_platdata *plat;
+ struct plat_dt *dt_p;
+ u32 word;
+ int ret;
+
+ dt_p = devm_kzalloc(sm->dev, sizeof(*dt_p), GFP_KERNEL);
+ if (!dt_p)
+ return -ENOMEM;
+
+ plat = &dt_p->plat;
+ plat->init = &dt_p->init;
+
+ plat->init->devices = sm501_read_devices(sm->dev, np);
+ /* mclk and m1xclk are not u32, so convert between them using intermediate variables. */
+ of_property_read_u32(np, "smi,mclk", &word);
+ plat->init->mclk = word;
+ of_property_read_u32(np, "smi,m1xclk", &word);
+ plat->init->m1xclk = word;
+
+ sm501_of_read_config(sm->dev, np, "misc-timing", misc_timming,
+ &plat->init->misc_timing);
+ sm501_of_read_config(sm->dev, np, "misc-control", misc_control,
+ &plat->init->misc_control);
+ sm501_of_read_gpio(sm->dev, np,
+ &plat->init->gpio_high, &plat->init->gpio_low);
+
+ if (IS_ENABLED(CONFIG_MFD_SM501_GPIO) &&
+ (plat->init->devices & SM501_USE_GPIO)) {
+ ret = sm501_parse_dt_gpio_i2c(sm->dev, plat, np);
+ if (ret)
+ return ret;
+ }
+ sm->platdata = plat;
+ return 0;
+}
+
static int sm501_plat_probe(struct platform_device *dev)
{
struct sm501_devdata *sm;
@@ -1406,6 +1836,12 @@ static int sm501_plat_probe(struct platform_device *dev)
goto err_res;
}
+ if (IS_ENABLED(CONFIG_OF) && dev->dev.of_node) {
+ ret = sm501_parse_dt(sm, dev->dev.of_node);
+ if (ret)
+ goto err_res;
+ }
+
platform_set_drvdata(dev, sm);
sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
@@ -1932,6 +1932,106 @@ static int sm501fb_start_one(struct sm501fb_info *info,
return 0;
}
+#if defined(CONFIG_OF)
+static u32 read_display_flags(struct device_node *np)
+{
+ static const char * const name[] = {
+ "use-init-done", "disable-at-exit", "use-hwcursor", "use-hwaccel",
+ "panel-no-fpen", "panel-no-vbiasen", "panel-inv-fpen", "panel-inv-vbiasen",
+ };
+
+ struct property *prop;
+ unsigned int i;
+ const char *s;
+ u32 ret = 0;
+
+ of_property_for_each_string(np, "smi,flags", prop, s) {
+ for (i = 0; i < ARRAY_SIZE(name); i++) {
+ if (strcmp(s, name[i]) == 0) {
+ ret |= 1 << i;
+ break;
+ }
+ }
+ }
+ return ret;
+}
+
+/* parse CRT / panel configuration */
+static struct sm501_platdata_fbsub *dt_fbsub(struct device *dev,
+ struct device_node *np,
+ const char *name)
+{
+ struct sm501_platdata_fbsub *fbsub = NULL;
+ struct fb_videomode *def_mode = NULL;
+ struct device_node *child;
+ const void *p_edid;
+ u32 flags = 0;
+ u32 bpp = 0;
+ int len;
+
+ child = of_get_child_by_name(np, name);
+ if (child == NULL)
+ return NULL;
+
+ p_edid = of_get_property(child, "edid", &len);
+ if (p_edid && len == EDID_LENGTH) {
+ struct fb_monspecs *specs;
+ u8 *edid;
+
+ edid = kmemdup(p_edid, EDID_LENGTH, GFP_KERNEL);
+ if (edid) {
+ specs = kzalloc(sizeof(*specs), GFP_KERNEL);
+ if (specs) {
+ fb_edid_to_monspecs(edid, specs);
+ def_mode = specs->modedb;
+ }
+ }
+ kfree(edid);
+ }
+
+ of_property_read_u32(child, "bpp", &bpp);
+
+ /* If flags property is obtained, fbsub is returned. */
+ flags = read_display_flags(child);
+ if (flags) {
+ fbsub = devm_kzalloc(dev, sizeof(*fbsub), GFP_KERNEL);
+ if (fbsub) {
+ fbsub->def_mode = def_mode;
+ fbsub->def_bpp = bpp;
+ fbsub->flags = flags;
+ }
+ }
+ return fbsub;
+}
+
+/* Build platform_data from OF property */
+static struct sm501_platdata_fb *pdata_from_dt(struct device *dev, struct device_node *np)
+{
+ enum sm501_fb_routing fb_route = SM501_FB_OWN;
+ struct sm501_platdata_fb *pdata = NULL;
+ struct sm501_platdata_fbsub *fb_crt;
+ struct sm501_platdata_fbsub *fb_pnl;
+ unsigned int flags = 0;
+
+ if (of_property_read_bool(np, "route-crt-panel"))
+ fb_route = SM501_FB_CRT_PANEL;
+ if (of_property_read_bool(np, "swap-fb-endian"))
+ flags = SM501_FBPD_SWAP_FB_ENDIAN;
+ fb_crt = dt_fbsub(dev, np, "crt");
+ fb_pnl = dt_fbsub(dev, np, "panel");
+ if (fb_crt || fb_pnl) {
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (pdata) {
+ pdata->fb_route = fb_route;
+ pdata->flags = flags;
+ pdata->fb_crt = fb_crt;
+ pdata->fb_pnl = fb_pnl;
+ }
+ }
+ return pdata;
+}
+#endif
+
static int sm501fb_probe(struct platform_device *pdev)
{
struct sm501fb_info *info;
@@ -1974,6 +2074,12 @@ static int sm501fb_probe(struct platform_device *pdev)
if (info->edid_data)
found = 1;
}
+ /* Get platform data compatible configuration */
+ if (!found) {
+ info->pdata = pdata_from_dt(dev, np);
+ if (info->pdata)
+ found = 1;
+ }
}
#endif
if (!found) {
Various parameters of SM501 can be set using platform_data, so parameters cannot be passed in the DeviceTree target. Expands the parameters set in platform_data so that they can be specified using DeviceTree properties. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> --- drivers/mfd/sm501.c | 436 ++++++++++++++++++++++++++++++++++ drivers/video/fbdev/sm501fb.c | 106 +++++++++ 2 files changed, 542 insertions(+)