| Message ID | 20240109125814.3691033-9-tudor.ambarus@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | GS101 Oriole: CMU_PERIC0 support and USI updates | expand |
On Tue, Jan 9, 2024 at 7:00 AM Tudor Ambarus <tudor.ambarus@linaro.org> wrote: > > Remove the reg-io-width property in order to comply with the bindings. > > The entire bus (PERIC) on which the GS101 serial resides only allows > 32-bit register accesses. The reg-io-width dt property is disallowed > for the "google,gs101-uart" compatible and instead the iotype is > inferred from the compatible. > > Reviewed-by: Peter Griffin <peter.griffin@linaro.org> > Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> > --- Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Just out of curiosity (I probably missed the relevant discussion earlier): what is the actual reason for moving 'reg-io-width' to the driver's code as 'iotype'? I mean, what is the actual problem that's being solved by this -- is it to make the earlycon functional for gs101? I'm asking because the bus width looks like a part of HW description, which usually belongs to dts, from the design point of view. Anyways, that's not a concern, just trying to understand the decision. > v3: collect Peter's R-b tag > v2: new patch > > arch/arm64/boot/dts/exynos/google/gs101.dtsi | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > index d838e3a7af6e..4e5f4c748906 100644 > --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi > +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi > @@ -366,7 +366,6 @@ usi_uart: usi@10a000c0 { > serial_0: serial@10a00000 { > compatible = "google,gs101-uart"; > reg = <0x10a00000 0xc0>; > - reg-io-width = <4>; > interrupts = <GIC_SPI 634 > IRQ_TYPE_LEVEL_HIGH 0>; > clocks = <&dummy_clk 0>, <&dummy_clk 0>; > -- > 2.43.0.472.g3155946c3a-goog > >
On 1/16/24 17:57, Sam Protsenko wrote: > On Tue, Jan 9, 2024 at 7:00 AM Tudor Ambarus <tudor.ambarus@linaro.org> wrote: >> Remove the reg-io-width property in order to comply with the bindings. >> >> The entire bus (PERIC) on which the GS101 serial resides only allows >> 32-bit register accesses. The reg-io-width dt property is disallowed >> for the "google,gs101-uart" compatible and instead the iotype is >> inferred from the compatible. >> >> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> >> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> >> --- > Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> > > Just out of curiosity (I probably missed the relevant discussion > earlier): what is the actual reason for moving 'reg-io-width' to the > driver's code as 'iotype'? I mean, what is the actual problem that's The majority (if not all?) of the hardware blocks in GS101 SoC require 32 bit register access widths. Instead of specifying reg-io-width = 4 everywhere in the device tree, we infer it from the compatibles. The relevant discussion is here: https://lore.kernel.org/linux-arm-kernel/db368449-f446-47e8-81b6-a11c2a872306@linaro.org/ Cheers, ta > being solved by this -- is it to make the earlycon functional for > gs101? I'm asking because the bus width looks like a part of HW > description, which usually belongs to dts, from the design point of > view. Anyways, that's not a concern, just trying to understand the > decision.
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index d838e3a7af6e..4e5f4c748906 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -366,7 +366,6 @@ usi_uart: usi@10a000c0 { serial_0: serial@10a00000 { compatible = "google,gs101-uart"; reg = <0x10a00000 0xc0>; - reg-io-width = <4>; interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&dummy_clk 0>, <&dummy_clk 0>;