@@ -5,7 +5,7 @@
obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o \
ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o \
- ip27-hubio.o ip27-xtalk.o
+ ip27-xtalk.o
obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o
obj-$(CONFIG_SMP) += ip27-smp.o
@@ -22,6 +22,8 @@
#include <asm/traps.h>
#include <linux/uaccess.h>
+#include "ip27-common.h"
+
static void dump_hub_information(unsigned long errst0, unsigned long errst1)
{
static char *err_type[2][8] = {
@@ -57,7 +59,7 @@ static void dump_hub_information(unsigned long errst0, unsigned long errst1)
[st0.pi_stat0_fmt.s0_err_type] ? : "invalid");
}
-int ip27_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip27_be_handler(struct pt_regs *regs, int is_fixup)
{
unsigned long errst0, errst1;
int data = regs->cp0_cause & 4;
@@ -10,6 +10,7 @@ extern void hub_rt_clock_event_init(void);
extern void hub_rtc_init(nasid_t nasid);
extern void install_cpu_nmi_handler(int slice);
extern void install_ipi(void);
+extern void ip27_be_init(void);
extern void ip27_reboot_setup(void);
extern const struct plat_smp_ops ip27_smp_ops;
extern unsigned long node_getfirstfree(nasid_t nasid);
@@ -17,4 +18,5 @@ extern void per_cpu_init(void);
extern void replicate_kernel_text(void);
extern void setup_replication_mask(void);
+
#endif /* __IP27_COMMON_H */
deleted file mode 100644
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1992-1997, 2000-2003 Silicon Graphics, Inc.
- * Copyright (C) 2004 Christoph Hellwig.
- *
- * Support functions for the HUB ASIC - mostly PIO mapping related.
- */
-
-#include <linux/bitops.h>
-#include <linux/string.h>
-#include <linux/mmzone.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/agent.h>
-#include <asm/sn/io.h>
-#include <asm/xtalk/xtalk.h>
-
-
-static int force_fire_and_forget = 1;
-
-/**
- * hub_pio_map - establish a HUB PIO mapping
- *
- * @nasid: nasid to perform PIO mapping on
- * @widget: widget ID to perform PIO mapping for
- * @xtalk_addr: xtalk_address that needs to be mapped
- * @size: size of the PIO mapping
- *
- **/
-unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget,
- unsigned long xtalk_addr, size_t size)
-{
- unsigned i;
-
- /* use small-window mapping if possible */
- if ((xtalk_addr % SWIN_SIZE) + size <= SWIN_SIZE)
- return NODE_SWIN_BASE(nasid, widget) + (xtalk_addr % SWIN_SIZE);
-
- if ((xtalk_addr % BWIN_SIZE) + size > BWIN_SIZE) {
- printk(KERN_WARNING "PIO mapping at hub %d widget %d addr 0x%lx"
- " too big (%ld)\n",
- nasid, widget, xtalk_addr, size);
- return 0;
- }
-
- xtalk_addr &= ~(BWIN_SIZE-1);
- for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) {
- if (test_and_set_bit(i, hub_data(nasid)->h_bigwin_used))
- continue;
-
- /*
- * The code below does a PIO write to setup an ITTE entry.
- *
- * We need to prevent other CPUs from seeing our updated
- * memory shadow of the ITTE (in the piomap) until the ITTE
- * entry is actually set up; otherwise, another CPU might
- * attempt a PIO prematurely.
- *
- * Also, the only way we can know that an entry has been
- * received by the hub and can be used by future PIO reads/
- * writes is by reading back the ITTE entry after writing it.
- *
- * For these two reasons, we PIO read back the ITTE entry
- * after we write it.
- */
- IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr);
- __raw_readq(IIO_ITTE_GET(nasid, i));
-
- return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE);
- }
-
- printk(KERN_WARNING "unable to establish PIO mapping for at"
- " hub %d widget %d addr 0x%lx\n",
- nasid, widget, xtalk_addr);
- return 0;
-}
-
-
-/*
- * hub_setup_prb(nasid, prbnum, credits, conveyor)
- *
- * Put a PRB into fire-and-forget mode if conveyor isn't set. Otherwise,
- * put it into conveyor belt mode with the specified number of credits.
- */
-static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
-{
- union iprb_u prb;
- int prb_offset;
-
- /*
- * Get the current register value.
- */
- prb_offset = IIO_IOPRB(prbnum);
- prb.iprb_regval = REMOTE_HUB_L(nasid, prb_offset);
-
- /*
- * Clear out some fields.
- */
- prb.iprb_ovflow = 1;
- prb.iprb_bnakctr = 0;
- prb.iprb_anakctr = 0;
-
- /*
- * Enable or disable fire-and-forget mode.
- */
- prb.iprb_ff = force_fire_and_forget ? 1 : 0;
-
- /*
- * Set the appropriate number of PIO credits for the widget.
- */
- prb.iprb_xtalkctr = credits;
-
- /*
- * Store the new value to the register.
- */
- REMOTE_HUB_S(nasid, prb_offset, prb.iprb_regval);
-}
-
-/**
- * hub_set_piomode - set pio mode for a given hub
- *
- * @nasid: physical node ID for the hub in question
- *
- * Put the hub into either "PIO conveyor belt" mode or "fire-and-forget" mode.
- * To do this, we have to make absolutely sure that no PIOs are in progress
- * so we turn off access to all widgets for the duration of the function.
- *
- * XXX - This code should really check what kind of widget we're talking
- * to. Bridges can only handle three requests, but XG will do more.
- * How many can crossbow handle to widget 0? We're assuming 1.
- *
- * XXX - There is a bug in the crossbow that link reset PIOs do not
- * return write responses. The easiest solution to this problem is to
- * leave widget 0 (xbow) in fire-and-forget mode at all times. This
- * only affects pio's to xbow registers, which should be rare.
- **/
-static void hub_set_piomode(nasid_t nasid)
-{
- u64 ii_iowa;
- union hubii_wcr_u ii_wcr;
- unsigned i;
-
- ii_iowa = REMOTE_HUB_L(nasid, IIO_OUTWIDGET_ACCESS);
- REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, 0);
-
- ii_wcr.wcr_reg_value = REMOTE_HUB_L(nasid, IIO_WCR);
-
- if (ii_wcr.iwcr_dir_con) {
- /*
- * Assume a bridge here.
- */
- hub_setup_prb(nasid, 0, 3);
- } else {
- /*
- * Assume a crossbow here.
- */
- hub_setup_prb(nasid, 0, 1);
- }
-
- /*
- * XXX - Here's where we should take the widget type into
- * when account assigning credits.
- */
- for (i = HUB_WIDGET_ID_MIN; i <= HUB_WIDGET_ID_MAX; i++)
- hub_setup_prb(nasid, i, 3);
-
- REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, ii_iowa);
-}
-
-/*
- * hub_pio_init - PIO-related hub initialization
- *
- * @hub: hubinfo structure for our hub
- */
-void hub_pio_init(nasid_t nasid)
-{
- unsigned i;
-
- /* initialize big window piomaps for this hub */
- bitmap_zero(hub_data(nasid)->h_bigwin_used, HUB_NUM_BIG_WINDOW);
- for (i = 0; i < HUB_NUM_BIG_WINDOW; i++)
- IIO_ITTE_DISABLE(nasid, i);
-
- hub_set_piomode(nasid);
-}
@@ -23,6 +23,8 @@
#include <asm/sn/intr.h>
#include <asm/sn/irq_alloc.h>
+#include "ip27-common.h"
+
struct hub_irq_data {
u64 *irq_mask[2];
cpuid_t cpu;
@@ -23,6 +23,7 @@
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
+#include <asm/sgialib.h>
#include <asm/sn/arch.h>
#include <asm/sn/agent.h>
@@ -11,6 +11,8 @@
#include <asm/sn/arch.h>
#include <asm/sn/agent.h>
+#include "ip27-common.h"
+
#if 0
#define NODE_NUM_CPUS(n) CNODE_NUM_CPUS(n)
#else
@@ -23,16 +25,7 @@
typedef unsigned long machreg_t;
static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-
-/*
- * Let's see what else we need to do here. Set up sp, gp?
- */
-void nmi_dump(void)
-{
- void cont_nmi_dump(void);
-
- cont_nmi_dump();
-}
+static void nmi_dump(void);
void install_cpu_nmi_handler(int slice)
{
@@ -53,7 +46,7 @@ void install_cpu_nmi_handler(int slice)
* into the eframe format for the node under consideration.
*/
-void nmi_cpu_eframe_save(nasid_t nasid, int slice)
+static void nmi_cpu_eframe_save(nasid_t nasid, int slice)
{
struct reg_struct *nr;
int i;
@@ -129,7 +122,7 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice)
pr_emerg("\n");
}
-void nmi_dump_hub_irq(nasid_t nasid, int slice)
+static void nmi_dump_hub_irq(nasid_t nasid, int slice)
{
u64 mask0, mask1, pend0, pend1;
@@ -153,7 +146,7 @@ void nmi_dump_hub_irq(nasid_t nasid, int slice)
* Copy the cpu registers which have been saved in the IP27prom format
* into the eframe format for the node under consideration.
*/
-void nmi_node_eframe_save(nasid_t nasid)
+static void nmi_node_eframe_save(nasid_t nasid)
{
int slice;
@@ -170,8 +163,7 @@ void nmi_node_eframe_save(nasid_t nasid)
/*
* Save the nmi cpu registers for all cpus in the system.
*/
-void
-nmi_eframes_save(void)
+static void nmi_eframes_save(void)
{
nasid_t nasid;
@@ -179,8 +171,7 @@ nmi_eframes_save(void)
nmi_node_eframe_save(nasid);
}
-void
-cont_nmi_dump(void)
+static void nmi_dump(void)
{
#ifndef REAL_NMI_SIGNAL
static atomic_t nmied_cpus = ATOMIC_INIT(0);
Fix missing prototypes by making not shared functions static and adding others to ip27-common.h. Also drop ip27-hubio.c as it's not used for a long time. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> --- arch/mips/sgi-ip27/Makefile | 2 +- arch/mips/sgi-ip27/ip27-berr.c | 4 +- arch/mips/sgi-ip27/ip27-common.h | 2 + arch/mips/sgi-ip27/ip27-hubio.c | 185 ------------------------------- arch/mips/sgi-ip27/ip27-irq.c | 2 + arch/mips/sgi-ip27/ip27-memory.c | 1 + arch/mips/sgi-ip27/ip27-nmi.c | 25 ++--- 7 files changed, 17 insertions(+), 204 deletions(-) delete mode 100644 arch/mips/sgi-ip27/ip27-hubio.c