diff mbox

ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board

Message ID 1341920671-8348-1-git-send-email-broonie@opensource.wolfsonmicro.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mark Brown July 10, 2012, 11:44 a.m. UTC 
None of the GPIO IRQs are connected so there is no reason to specify a
base.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c64xx/mach-smdk6410.c |    1 -
 1 file changed, 1 deletion(-)

Comments

Kim Kukjin July 12, 2012, 9:10 a.m. UTC | #1 
Mark Brown wrote:
> 
> None of the GPIO IRQs are connected so there is no reason to specify a
> base.
> 
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
>  arch/arm/mach-s3c64xx/mach-smdk6410.c |    1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-
> s3c64xx/mach-smdk6410.c
> index df3103d..0fe4f15 100644
> --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
> +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
> @@ -566,7 +566,6 @@ static struct wm831x_status_pdata wm1192_led8_pdata =
> {
> 
>  static struct wm831x_pdata smdk6410_wm1192_pdata = {
>  	.pre_init = wm1192_pre_init,
> -	.irq_base = IRQ_BOARD_START,
> 
>  	.backlight = &wm1192_backlight_pdata,
>  	.dcdc = {
> --
> 1.7.10

Applied, thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
diff mbox

Patch

diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index df3103d..0fe4f15 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -566,7 +566,6 @@  static struct wm831x_status_pdata wm1192_led8_pdata = {
 
 static struct wm831x_pdata smdk6410_wm1192_pdata = {
 	.pre_init = wm1192_pre_init,
-	.irq_base = IRQ_BOARD_START,
 
 	.backlight = &wm1192_backlight_pdata,
 	.dcdc = {