mbox series

[RESEND,v6,0/5] Add support for video hardware codec of STMicroelectronics STM32 SoC series

Message ID 20240110104642.532011-1-hugues.fruchet@foss.st.com (mailing list archive)
Headers show
Series Add support for video hardware codec of STMicroelectronics STM32 SoC series | expand

Message

Hugues FRUCHET Jan. 10, 2024, 10:46 a.m. UTC 
This patchset introduces support for VDEC video hardware decoder
and VENC video hardware encoder of STMicroelectronics STM32MP25
SoC series.

This initial support implements H264 decoding, VP8 decoding and
JPEG encoding.

This has been tested on STM32MP257F-EV1 evaluation board.

===========
= history =
===========
version 6:
   - Use a single file for VDEC and VENC variants as suggested by Alex Bee
   - Fix some typos raised by Sebastian Fricke
   - Add Krzysztof Kozlowski Reviewed-by

version 5:
   - Precise that video decoding as been successfully tested up to full HD
   - Add Nicolas Dufresne Reviewed-by

version 4:
   - Fix comments from Nicolas about dropping encoder raw steps

version 3:
   - Fix remarks from Krzysztof Kozlowski:
    - drop "items", we keep simple enum in such case
    - drop second example - it is the same as the first
   - Drop unused node labels as suggested by Conor Dooley
   - Revisit min/max resolutions as suggested by Nicolas Dufresne

version 2:
   - Fix remarks from Krzysztof Kozlowski on v1:
    - single video-codec binding for both VDEC/VENC
    - get rid of "-names"
    - use of generic node name "video-codec"

version 1:
  - Initial submission

Hugues Fruchet (5):
  dt-bindings: media: Document STM32MP25 VDEC & VENC video codecs
  media: hantro: add support for STM32MP25 VDEC
  media: hantro: add support for STM32MP25 VENC
  arm64: dts: st: add video decoder support to stm32mp255
  arm64: dts: st: add video encoder support to stm32mp255

 .../media/st,stm32mp25-video-codec.yaml       |  49 +++++
 arch/arm64/boot/dts/st/stm32mp251.dtsi        |  12 ++
 arch/arm64/boot/dts/st/stm32mp255.dtsi        |  17 ++
 drivers/media/platform/verisilicon/Kconfig    |  14 +-
 drivers/media/platform/verisilicon/Makefile   |   3 +
 .../media/platform/verisilicon/hantro_drv.c   |   4 +
 .../media/platform/verisilicon/hantro_hw.h    |   2 +
 .../platform/verisilicon/stm32mp25_vpu_hw.c   | 186 ++++++++++++++++++
 8 files changed, 284 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml
 create mode 100644 drivers/media/platform/verisilicon/stm32mp25_vpu_hw.c

Comments

Alexandre TORGUE Jan. 24, 2024, 12:36 p.m. UTC | #1 
Hi

On 1/10/24 11:46, Hugues Fruchet wrote:
> This patchset introduces support for VDEC video hardware decoder
> and VENC video hardware encoder of STMicroelectronics STM32MP25
> SoC series.
> 
> This initial support implements H264 decoding, VP8 decoding and
> JPEG encoding.
> 
> This has been tested on STM32MP257F-EV1 evaluation board.
> 
> ===========
> = history =
> ===========
> version 6:
>     - Use a single file for VDEC and VENC variants as suggested by Alex Bee
>     - Fix some typos raised by Sebastian Fricke
>     - Add Krzysztof Kozlowski Reviewed-by
> 
> version 5:
>     - Precise that video decoding as been successfully tested up to full HD
>     - Add Nicolas Dufresne Reviewed-by
> 
> version 4:
>     - Fix comments from Nicolas about dropping encoder raw steps
> 
> version 3:
>     - Fix remarks from Krzysztof Kozlowski:
>      - drop "items", we keep simple enum in such case
>      - drop second example - it is the same as the first
>     - Drop unused node labels as suggested by Conor Dooley
>     - Revisit min/max resolutions as suggested by Nicolas Dufresne
> 
> version 2:
>     - Fix remarks from Krzysztof Kozlowski on v1:
>      - single video-codec binding for both VDEC/VENC
>      - get rid of "-names"
>      - use of generic node name "video-codec"
> 
> version 1:
>    - Initial submission
> 
> Hugues Fruchet (5):
>    dt-bindings: media: Document STM32MP25 VDEC & VENC video codecs
>    media: hantro: add support for STM32MP25 VDEC
>    media: hantro: add support for STM32MP25 VENC
>    arm64: dts: st: add video decoder support to stm32mp255
>    arm64: dts: st: add video encoder support to stm32mp255
> 

Sakari, Mauro, do you plan to take patches 1 to 3 on your next branch ?
I will take DT pacthes in mine but I would like to be sure that 
dt-binding will be applied in a next branch (for the next v6.9 cycle);

regards
Alex


>   .../media/st,stm32mp25-video-codec.yaml       |  49 +++++
>   arch/arm64/boot/dts/st/stm32mp251.dtsi        |  12 ++
>   arch/arm64/boot/dts/st/stm32mp255.dtsi        |  17 ++
>   drivers/media/platform/verisilicon/Kconfig    |  14 +-
>   drivers/media/platform/verisilicon/Makefile   |   3 +
>   .../media/platform/verisilicon/hantro_drv.c   |   4 +
>   .../media/platform/verisilicon/hantro_hw.h    |   2 +
>   .../platform/verisilicon/stm32mp25_vpu_hw.c   | 186 ++++++++++++++++++
>   8 files changed, 284 insertions(+), 3 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml
>   create mode 100644 drivers/media/platform/verisilicon/stm32mp25_vpu_hw.c
>
Sakari Ailus Jan. 25, 2024, 4:03 p.m. UTC | #2 
Hi Alexandre,

On Wed, Jan 24, 2024 at 01:36:02PM +0100, Alexandre TORGUE wrote:
> > Hugues Fruchet (5):
> >    dt-bindings: media: Document STM32MP25 VDEC & VENC video codecs
> >    media: hantro: add support for STM32MP25 VDEC
> >    media: hantro: add support for STM32MP25 VENC
> >    arm64: dts: st: add video decoder support to stm32mp255
> >    arm64: dts: st: add video encoder support to stm32mp255
> > 
> 
> Sakari, Mauro, do you plan to take patches 1 to 3 on your next branch ?
> I will take DT pacthes in mine but I would like to be sure that dt-binding
> will be applied in a next branch (for the next v6.9 cycle);

This being a codec driver, I presume Hans would pick these.
Alexandre TORGUE Feb. 29, 2024, 9:34 a.m. UTC | #3 
Hi

On 1/10/24 11:46, Hugues Fruchet wrote:
> This patchset introduces support for VDEC video hardware decoder
> and VENC video hardware encoder of STMicroelectronics STM32MP25
> SoC series.
> 
> This initial support implements H264 decoding, VP8 decoding and
> JPEG encoding.
> 
> This has been tested on STM32MP257F-EV1 evaluation board.
> 
> ===========
> = history =
> ===========
> version 6:
>     - Use a single file for VDEC and VENC variants as suggested by Alex Bee
>     - Fix some typos raised by Sebastian Fricke
>     - Add Krzysztof Kozlowski Reviewed-by
> 
> version 5:
>     - Precise that video decoding as been successfully tested up to full HD
>     - Add Nicolas Dufresne Reviewed-by
> 
> version 4:
>     - Fix comments from Nicolas about dropping encoder raw steps
> 
> version 3:
>     - Fix remarks from Krzysztof Kozlowski:
>      - drop "items", we keep simple enum in such case
>      - drop second example - it is the same as the first
>     - Drop unused node labels as suggested by Conor Dooley
>     - Revisit min/max resolutions as suggested by Nicolas Dufresne
> 
> version 2:
>     - Fix remarks from Krzysztof Kozlowski on v1:
>      - single video-codec binding for both VDEC/VENC
>      - get rid of "-names"
>      - use of generic node name "video-codec"
> 
> version 1:
>    - Initial submission
> 
> Hugues Fruchet (5):
>    dt-bindings: media: Document STM32MP25 VDEC & VENC video codecs
>    media: hantro: add support for STM32MP25 VDEC
>    media: hantro: add support for STM32MP25 VENC
>    arm64: dts: st: add video decoder support to stm32mp255
>    arm64: dts: st: add video encoder support to stm32mp255
> 

DT patches ([4]&[5]) applied on stm32-next. I assume that dt-bindings 
patch will go through the media tree.

Thanks
Alex


>   .../media/st,stm32mp25-video-codec.yaml       |  49 +++++
>   arch/arm64/boot/dts/st/stm32mp251.dtsi        |  12 ++
>   arch/arm64/boot/dts/st/stm32mp255.dtsi        |  17 ++
>   drivers/media/platform/verisilicon/Kconfig    |  14 +-
>   drivers/media/platform/verisilicon/Makefile   |   3 +
>   .../media/platform/verisilicon/hantro_drv.c   |   4 +
>   .../media/platform/verisilicon/hantro_hw.h    |   2 +
>   .../platform/verisilicon/stm32mp25_vpu_hw.c   | 186 ++++++++++++++++++
>   8 files changed, 284 insertions(+), 3 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml
>   create mode 100644 drivers/media/platform/verisilicon/stm32mp25_vpu_hw.c
>