| Message ID | 20240125104030.B6CA6C433C7@smtp.kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | pull-request: wireless-next-2024-01-25 | expand |
On Thu, 25 Jan 2024 10:40:30 +0000 (UTC) Kalle Valo wrote: > The first "new features" pull request for v6.9. We have only driver > changes this time and most of them are for Realtek drivers. Really > nice to see activity in Broadcom drivers again. minor thing for a follow up: drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c:432:49: warning: no newline at end of file
Hello: This pull request was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba@kernel.org>: On Thu, 25 Jan 2024 10:40:30 +0000 (UTC) you wrote: > Hi, > > here's a pull request to net-next tree, more info below. Please let me know if > there are any problems. > > Kalle > > [...] Here is the summary with links: - pull-request: wireless-next-2024-01-25 https://git.kernel.org/netdev/net-next/c/b54846da4594 You are awesome, thank you!
Jakub Kicinski <kuba@kernel.org> writes: > On Thu, 25 Jan 2024 10:40:30 +0000 (UTC) Kalle Valo wrote: >> The first "new features" pull request for v6.9. We have only driver >> changes this time and most of them are for Realtek drivers. Really >> nice to see activity in Broadcom drivers again. > > minor thing for a follow up: > > drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c:432:49: > warning: no newline at end of file Oh, sorry about that. Any tips how to detect this?
On January 26, 2024 7:01:18 AM Kalle Valo <kvalo@kernel.org> wrote: > Jakub Kicinski <kuba@kernel.org> writes: > >> On Thu, 25 Jan 2024 10:40:30 +0000 (UTC) Kalle Valo wrote: >>> The first "new features" pull request for v6.9. We have only driver >>> changes this time and most of them are for Realtek drivers. Really >>> nice to see activity in Broadcom drivers again. >> >> minor thing for a follow up: >> >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c:432:49: >> warning: no newline at end of file > > Oh, sorry about that. Any tips how to detect this? I thought checkpatch would signal that or is it a sparse warning. Anyway, I can fix it. Gr. AvS > -- > https://patchwork.kernel.org/project/linux-wireless/list/ > > https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Arend Van Spriel <arend.vanspriel@broadcom.com> writes: > On January 26, 2024 7:01:18 AM Kalle Valo <kvalo@kernel.org> wrote: > >> Jakub Kicinski <kuba@kernel.org> writes: >> >>> On Thu, 25 Jan 2024 10:40:30 +0000 (UTC) Kalle Valo wrote: >>>> The first "new features" pull request for v6.9. We have only driver >>>> changes this time and most of them are for Realtek drivers. Really >>>> nice to see activity in Broadcom drivers again. >>> >>> minor thing for a follow up: >>> >>> drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c:432:49: >>> warning: no newline at end of file >> >> Oh, sorry about that. Any tips how to detect this? > > I thought checkpatch would signal that or is it a sparse warning. I don't run checkpatch except for ath10k/ath11k/ath12k, too much noise. I ended up adding this to my script: for file in $(git ls-tree -r --name-only HEAD drivers/net/wireless/ net/wireless/ net/mac80211/); do if [ "$(tail -c 1 $file | cat -E)" != "$" ]; then echo $file: no newline at end of file; fi; done > Anyway, I can fix it. Thanks!
On Fri, 26 Jan 2024 12:05:17 +0200 Kalle Valo wrote: > > I thought checkpatch would signal that or is it a sparse warning. > > I don't run checkpatch except for ath10k/ath11k/ath12k, too much noise. > I ended up adding this to my script: We run build with sparse and W=1 and then diff the number of warnings to weed out the pre-existing ones, FWIW.
Jakub Kicinski <kuba@kernel.org> writes: > On Fri, 26 Jan 2024 12:05:17 +0200 Kalle Valo wrote: >> > I thought checkpatch would signal that or is it a sparse warning. >> >> I don't run checkpatch except for ath10k/ath11k/ath12k, too much noise. >> I ended up adding this to my script: > > We run build with sparse and W=1 and then diff the number of warnings > to weed out the pre-existing ones, FWIW. So for wireless and wireless-next I now check W=1 warnings every time I push. We are mostly warning free now but I'm not checking the linker warnings, for example the current MODULE_DESCRIPTION() warnings. It's really annoying, and extra work, that people enable new W=1 warnings before fixing them. Could we somehow push back on those and require that warnings are fixed before enabling with W=1 level? In wireless there is a significant number of sparse warnings. I have tried the cleanup people to fix them but it seems there's no interest, instead we get to receive pointless cleanups wasting our time. <loud sigh> BTW the 'no new line at end of file' warning is indeed from sparse, like Arend suspected: drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c:432:49: warning: no newline at end of file
On Sat, 27 Jan 2024 12:08:59 +0200 Kalle Valo wrote: > Jakub Kicinski <kuba@kernel.org> writes: > >> I don't run checkpatch except for ath10k/ath11k/ath12k, too much noise. > >> I ended up adding this to my script: > > > > We run build with sparse and W=1 and then diff the number of warnings > > to weed out the pre-existing ones, FWIW. > > So for wireless and wireless-next I now check W=1 warnings every time I > push. We are mostly warning free now but I'm not checking the linker > warnings, for example the current MODULE_DESCRIPTION() warnings. > > It's really annoying, and extra work, that people enable new W=1 > warnings before fixing them. Could we somehow push back on those and > require that warnings are fixed before enabling with W=1 level? My quite possibly incorrect understanding is that "giving people time to fix" is the main point of W=1 :( W=2 is for stuff which may false positive, W=1 is for stuff which does not false positive but we can't enable it in formal builds because the tree is full of it. > In wireless there is a significant number of sparse warnings. I have > tried the cleanup people to fix them but it seems there's no interest, > instead we get to receive pointless cleanups wasting our time. <loud sigh> Tell me about it.. :) > BTW the 'no new line at end of file' warning is indeed from sparse, like > Arend suspected: > > drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c:432:49: warning: no newline at end of file BTW I'd happy to help you set up an instance of our build testing bot, if you have a VM that can be used. It does take a bit of care and feeding, but seeing the build failures in patchwork pays the time back.
Jakub Kicinski <kuba@kernel.org> writes: > On Sat, 27 Jan 2024 12:08:59 +0200 Kalle Valo wrote: >> Jakub Kicinski <kuba@kernel.org> writes: >> >> I don't run checkpatch except for ath10k/ath11k/ath12k, too much noise. >> >> I ended up adding this to my script: >> > >> > We run build with sparse and W=1 and then diff the number of warnings >> > to weed out the pre-existing ones, FWIW. >> >> So for wireless and wireless-next I now check W=1 warnings every time I >> push. We are mostly warning free now but I'm not checking the linker >> warnings, for example the current MODULE_DESCRIPTION() warnings. >> >> It's really annoying, and extra work, that people enable new W=1 >> warnings before fixing them. Could we somehow push back on those and >> require that warnings are fixed before enabling with W=1 level? > > My quite possibly incorrect understanding is that "giving people time > to fix" is the main point of W=1 :( W=2 is for stuff which may false > positive, W=1 is for stuff which does not false positive but we can't > enable it in formal builds because the tree is full of it. Ok, so keeping the code clean from W=1 warnings will be hard :/ >> In wireless there is a significant number of sparse warnings. I have >> tried the cleanup people to fix them but it seems there's no interest, >> instead we get to receive pointless cleanups wasting our time. <loud sigh> > > Tell me about it.. :) > >> BTW the 'no new line at end of file' warning is indeed from sparse, like >> Arend suspected: >> >> drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c:432:49: >> warning: no newline at end of file > > BTW I'd happy to help you set up an instance of our build testing bot, > if you have a VM that can be used. It does take a bit of care and > feeding, but seeing the build failures in patchwork pays the time back. We have talked about setting up your build bot for linux-wireless patchwork project but never found the time to do anything. Also we don't have a VM for it right now.
Hi, here's a pull request to net-next tree, more info below. Please let me know if there are any problems. Kalle The following changes since commit 3fbf61207c66ff7ac9b60ab76d4bfd239f97e973: Revert "mlx5 updates 2023-12-20" (2024-01-07 17:16:11 -0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git tags/wireless-next-2024-01-25 for you to fetch changes up to acf868ff60b1cd1f2e597f0b15aee2ff43f9fcd3: wifi: iwlegacy: Use kcalloc() instead of kzalloc() (2024-01-23 13:51:24 +0200) ---------------------------------------------------------------- wireless-next patches for v6.9 The first "new features" pull request for v6.9. We have only driver changes this time and most of them are for Realtek drivers. Really nice to see activity in Broadcom drivers again. Major changes: rtwl8xxxu * RTL8188F: concurrent interface support * Channel Switch Announcement (CSA) support in AP mode brcmfmac * per-vendor feature support * per-vendor SAE password setup rtlwifi * speed up USB firmware initialisation ---------------------------------------------------------------- Ajay Singh (4): wifi: wilc1000: fix driver_handler when committing initial configuration wifi: wilc1000: do not realloc workqueue everytime an interface is added wifi: wilc1000: fix incorrect power down sequence wifi: wilc1000: fix multi-vif management when deleting a vif Alexis Lothoré (2): wifi: wilc1000: fix declarations ordering wifi: wilc1000: fix RCU usage in connect path Arend van Spriel (5): wifi: brcmfmac: export firmware interface functions wifi: brcmfmac: add per-vendor feature detection callback wifi: brcmfmac: move feature overrides before feature_disable wifi: brcmfmac: avoid invalid list operation when vendor attach fails wifi: brcmfmac: allow per-vendor event handling Artem Chernyshev (1): wifi: brcmsmac: phy: Remove unreachable code Bitterblue Smith (5): wifi: rtl8xxxu: Fix LED control code of RTL8192FU wifi: rtl8xxxu: Fix off by one initial RTS rate wifi: rtlwifi: rtl_usb: Use sync register writes wifi: rtlwifi: rtl8192de: Don't read register in _rtl92de_query_rxphystatus wifi: rtlwifi: Speed up firmware loading for USB Cheng-Chieh Hsieh (1): wifi: rtw89: 8922a: update the register used in DIG and the DIG flow Chih-Kang Chang (2): wifi: rtw89: fix HW scan timeout due to TSF sync issue wifi: rtw89: fix disabling concurrent mode TX hang issue Chin-Yen Lee (1): wifi: rtw89: pci: use DBI function for 8852AE/8852BE/8851BE Chung-Hsuan Hung (3): wifi: rtw89: phy: add parser to support RX gain dynamic setting flow wifi: rtw89: 8922a: set RX gain along with set_channel operation wifi: rtw89: 8922a: add BTG functions to assist BT coexistence to control TX/RX Colin Ian King (1): wifi: rtw89: mac: Fix spelling mistakes "notfify" -> "notify" Dmitry Antipov (3): wifi: rtlwifi: cleanup few rtlxxx_tx_fill_desc() routines wifi: rtw88: use kstrtoX_from_user() in debugfs handlers wifi: rt2x00: simplify rt2x00crypto_rx_insert_iv() Erick Archer (1): wifi: iwlegacy: Use kcalloc() instead of kzalloc() Hector Martin (2): wifi: brcmfmac: cfg80211: Use WSEC to set SAE password wifi: brcmfmac: Demote vendor-specific attach/detach messages to info Jinjie Ruan (1): wifi: mwifiex: debugfs: Drop unnecessary error check for debugfs_create_dir() Martin Kaistra (24): wifi: rtl8xxxu: remove assignment of priv->vif in rtl8xxxu_bss_info_changed() wifi: rtl8xxxu: prepare supporting two virtual interfaces wifi: rtl8xxxu: support setting linktype for both interfaces wifi: rtl8xxxu: 8188e: convert usage of priv->vif to priv->vifs[0] wifi: rtl8xxxu: support setting mac address register for both interfaces wifi: rtl8xxxu: extend wifi connected check to both interfaces wifi: rtl8xxxu: extend check for matching bssid to both interfaces wifi: rtl8xxxu: don't parse CFO, if both interfaces are connected in STA mode wifi: rtl8xxxu: support setting bssid register for multiple interfaces wifi: rtl8xxxu: support multiple interfaces in set_aifs() wifi: rtl8xxxu: support multiple interfaces in update_beacon_work_callback() wifi: rtl8xxxu: support multiple interfaces in configure_filter() wifi: rtl8xxxu: support multiple interfaces in watchdog_callback() wifi: rtl8xxxu: support multiple interfaces in {add,remove}_interface() wifi: rtl8xxxu: support multiple interfaces in bss_info_changed() wifi: rtl8xxxu: support multiple interface in start_ap() wifi: rtl8xxxu: add macids for STA mode wifi: rtl8xxxu: remove obsolete priv->vif wifi: rtl8xxxu: add hw crypto support for AP mode wifi: rtl8xxxu: make supporting AP mode only on port 0 transparent wifi: rtl8xxxu: declare concurrent mode support for 8188f wifi: rtl8xxxu: add cancel_work_sync() for c2hcmd_work wifi: rtl8xxxu: enable channel switch support wifi: rtl8xxxu: add missing number of sec cam entries for all variants Ping-Ke Shih (35): wifi: rtw89: phy: move bb_gain_info used by WiFi 6 chips to union wifi: rtw89: phy: ignore special data from BB parameter file wifi: rtw89: 8922a: add NCTL pre-settings for WiFi 7 chips wifi: rtw89: phy: add BB wrapper of TX power for WiFi 7 chips wifi: rtw89: phy: set channel_info for WiFi 7 chips wifi: rtw88: 8822ce: refine power parameters for RFE type 5 wifi: rtw89: add firmware H2C command of BA CAM V1 wifi: rtw89: mac: add feature_init to initialize BA CAM V1 wifi: rtw89: add chip_ops::h2c_ba_cam() to configure BA CAM wifi: rtw89: 8922a: update BA CAM number to 24 wifi: rtw89: fw: use struct to fill BA CAM H2C commands wifi: rtw89: refine H2C command that pause transmitting by MAC ID wifi: rtw89: add new H2C command to pause/sleep transmitting by MAC ID wifi: rtw89: use struct to fill H2C command to download beacon frame wifi: rtw89: add H2C command to download beacon frame for WiFi 7 chips wifi: rtw89: add chip_ops::update_beacon to abstract update beacon operation wifi: rtw89: adjust init_he_cap() to add EHT cap into iftype_data wifi: rtw89: change supported bandwidths of chip_info to bit mask wifi: rtw89: add EHT capabilities for WiFi 7 chips wifi: rtw89: declare EXT NSS BW of VHT capability wifi: rtw89: fw: add H2C command to update security CAM v2 wifi: rtw89: fw: fill CMAC table to associated station for WiFi 7 chips wifi: rtw89: fw: add chip_ops to update CMAC table to associated station wifi: rtw89: fw: update TX AMPDU parameter to CMAC table wifi: rtw89: fw: add H2C command to reset CMAC table for WiFi 7 wifi: rtw89: fw: add H2C command to reset DMAC table for WiFi 7 wifi: rtw89: fw: use struct to fill JOIN H2C command wifi: rtw89: fw: extend JOIN H2C command to support WiFi 7 chips wifi: rtl8xxxu: convert EN_DESC_ID of TX descriptor to le32 type wifi: rtl8xxxu: make instances of iface limit and combination to be static const wifi: rtw89: add mlo_dbcc_mode for WiFi 7 chips wifi: rtw89: 8922a: add chip_ops::{enable,disable}_bb_rf wifi: rtw89: 8922a: add chip_ops related to BB init wifi: rtw89: 8922a: add register definitions of H2C, C2H, page, RRSR and EDCCA wifi: rtw89: 8922a: add TX power related ops Po-Hao Huang (6): wifi: rtw89: refine add_chan H2C command to encode_bits wifi: rtw89: refine hardware scan C2H events wifi: rtw89: Set default CQM config if not present wifi: rtw89: disable RTS when broadcast/multicast wifi: rtw89: fix null pointer access when abort scan wifi: rtw89: add wait/completion for abort scan Rahul Rameshbabu (4): wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled wifi: b43: Stop correct queue in DMA worker when QoS is disabled wifi: b43: Disable QoS for bcm4331 Ruan Jinjie (1): wifi: mwifiex: Use helpers to check multicast addresses Zheng Wang (1): wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach Zong-Zhe Yang (2): wifi: rtw89: 8852b: update TX power tables to R36 wifi: rtw89: 8851b: update TX power tables to R37 drivers/net/wireless/broadcom/b43/b43.h | 16 + drivers/net/wireless/broadcom/b43/dma.c | 4 +- drivers/net/wireless/broadcom/b43/main.c | 16 +- drivers/net/wireless/broadcom/b43/pio.c | 6 +- .../broadcom/brcm80211/brcmfmac/bca/core.c | 30 +- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 64 +- .../broadcom/brcm80211/brcmfmac/cfg80211.h | 2 + .../wireless/broadcom/brcm80211/brcmfmac/common.c | 18 +- .../wireless/broadcom/brcm80211/brcmfmac/core.c | 12 +- .../wireless/broadcom/brcm80211/brcmfmac/core.h | 2 +- .../broadcom/brcm80211/brcmfmac/cyw/core.c | 50 +- .../wireless/broadcom/brcm80211/brcmfmac/feature.c | 11 +- .../wireless/broadcom/brcm80211/brcmfmac/fweh.c | 154 +++- .../wireless/broadcom/brcm80211/brcmfmac/fweh.h | 60 +- .../wireless/broadcom/brcm80211/brcmfmac/fwil.c | 116 +-- .../wireless/broadcom/brcm80211/brcmfmac/fwil.h | 125 ++- .../broadcom/brcm80211/brcmfmac/fwil_types.h | 2 +- .../wireless/broadcom/brcm80211/brcmfmac/fwvid.c | 13 +- .../wireless/broadcom/brcm80211/brcmfmac/fwvid.h | 48 +- .../broadcom/brcm80211/brcmfmac/wcc/core.c | 31 +- .../broadcom/brcm80211/brcmsmac/phy/phy_cmn.c | 3 +- .../broadcom/brcm80211/brcmsmac/phy/phy_int.h | 2 +- .../broadcom/brcm80211/brcmsmac/phy/phy_n.c | 11 +- drivers/net/wireless/intel/iwlegacy/common.c | 4 +- drivers/net/wireless/marvell/mwifiex/cfg80211.c | 2 +- drivers/net/wireless/marvell/mwifiex/debugfs.c | 3 - drivers/net/wireless/marvell/mwifiex/wmm.c | 2 +- drivers/net/wireless/microchip/wilc1000/cfg80211.c | 12 +- drivers/net/wireless/microchip/wilc1000/hif.c | 40 +- drivers/net/wireless/microchip/wilc1000/netdev.c | 12 +- drivers/net/wireless/microchip/wilc1000/wlan.c | 35 +- drivers/net/wireless/microchip/wilc1000/wlan.h | 6 + drivers/net/wireless/ralink/rt2x00/rt2x00crypto.c | 5 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 20 +- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c | 3 +- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c | 2 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c | 1 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192f.c | 33 +- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8710b.c | 1 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c | 1 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 409 +++++++-- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 15 + drivers/net/wireless/realtek/rtlwifi/efuse.c | 36 +- drivers/net/wireless/realtek/rtlwifi/efuse.h | 4 +- drivers/net/wireless/realtek/rtlwifi/pci.c | 12 +- .../net/wireless/realtek/rtlwifi/rtl8192ce/trx.c | 4 - .../net/wireless/realtek/rtlwifi/rtl8192cu/sw.c | 6 +- .../net/wireless/realtek/rtlwifi/rtl8192cu/trx.c | 3 - .../net/wireless/realtek/rtlwifi/rtl8192de/trx.c | 5 +- .../net/wireless/realtek/rtlwifi/rtl8723ae/trx.c | 6 +- drivers/net/wireless/realtek/rtlwifi/usb.c | 164 ++-- drivers/net/wireless/realtek/rtlwifi/wifi.h | 38 +- drivers/net/wireless/realtek/rtw88/debug.c | 44 +- drivers/net/wireless/realtek/rtw88/pci.c | 4 + drivers/net/wireless/realtek/rtw88/reg.h | 3 + drivers/net/wireless/realtek/rtw89/cam.c | 61 ++ drivers/net/wireless/realtek/rtw89/cam.h | 109 +++ drivers/net/wireless/realtek/rtw89/chan.c | 2 +- drivers/net/wireless/realtek/rtw89/core.c | 344 +++++--- drivers/net/wireless/realtek/rtw89/core.h | 136 ++- drivers/net/wireless/realtek/rtw89/fw.c | 944 ++++++++++++++++++--- drivers/net/wireless/realtek/rtw89/fw.h | 810 ++++++++++-------- drivers/net/wireless/realtek/rtw89/mac.c | 96 ++- drivers/net/wireless/realtek/rtw89/mac.h | 5 +- drivers/net/wireless/realtek/rtw89/mac80211.c | 18 +- drivers/net/wireless/realtek/rtw89/mac_be.c | 4 +- drivers/net/wireless/realtek/rtw89/pci.c | 69 +- drivers/net/wireless/realtek/rtw89/pci.h | 1 + drivers/net/wireless/realtek/rtw89/phy.c | 46 +- drivers/net/wireless/realtek/rtw89/phy.h | 72 ++ drivers/net/wireless/realtek/rtw89/phy_be.c | 312 +++++++ drivers/net/wireless/realtek/rtw89/reg.h | 278 +++++- drivers/net/wireless/realtek/rtw89/rtw8851b.c | 15 +- .../net/wireless/realtek/rtw89/rtw8851b_table.c | 72 +- drivers/net/wireless/realtek/rtw89/rtw8852a.c | 11 +- drivers/net/wireless/realtek/rtw89/rtw8852b.c | 15 +- .../net/wireless/realtek/rtw89/rtw8852b_table.c | 142 ++-- drivers/net/wireless/realtek/rtw89/rtw8852c.c | 14 +- drivers/net/wireless/realtek/rtw89/rtw8922a.c | 705 ++++++++++++++- drivers/net/wireless/realtek/rtw89/wow.c | 2 +- 82 files changed, 4618 insertions(+), 1398 deletions(-)