| Message ID | 20240124-vv-dax_abi-v7-5-20d16cb8d23d@intel.com |
|---|---|
| State | Accepted |
| Commit | 73954d379efd176e9b011142c55aa8da93ac740a |
| Headers | show |
| Series | Add DAX ABI for memmap_on_memory | expand |
On Wed, Jan 24, 2024 at 12:03:50PM -0800, Vishal Verma wrote: > Add a sysfs knob for dax devices to control the memmap_on_memory setting > if the dax device were to be hotplugged as system memory. > > The default memmap_on_memory setting for dax devices originating via > pmem or hmem is set to 'false' - i.e. no memmap_on_memory semantics, to > preserve legacy behavior. For dax devices via CXL, the default is on. > The sysfs control allows the administrator to override the above > defaults if needed. Reviewed-by: Alison Schofield <alison.schofield@intel.com> > > Cc: David Hildenbrand <david@redhat.com> > Cc: Dan Williams <dan.j.williams@intel.com> > Cc: Dave Jiang <dave.jiang@intel.com> > Cc: Dave Hansen <dave.hansen@linux.intel.com> > Cc: Huang Ying <ying.huang@intel.com> > Tested-by: Li Zhijian <lizhijian@fujitsu.com> > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Reviewed-by: David Hildenbrand <david@redhat.com> > Reviewed-by: Huang, Ying <ying.huang@intel.com> > Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> > --- > drivers/dax/bus.c | 43 +++++++++++++++++++++++++++++++++ > Documentation/ABI/testing/sysfs-bus-dax | 17 +++++++++++++ > 2 files changed, 60 insertions(+) > > diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c > index 0fd948a4443e..27c86d0ca711 100644 > --- a/drivers/dax/bus.c > +++ b/drivers/dax/bus.c > @@ -1349,6 +1349,48 @@ static ssize_t numa_node_show(struct device *dev, > } > static DEVICE_ATTR_RO(numa_node); > > +static ssize_t memmap_on_memory_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct dev_dax *dev_dax = to_dev_dax(dev); > + > + return sysfs_emit(buf, "%d\n", dev_dax->memmap_on_memory); > +} > + > +static ssize_t memmap_on_memory_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t len) > +{ > + struct dev_dax *dev_dax = to_dev_dax(dev); > + bool val; > + int rc; > + > + rc = kstrtobool(buf, &val); > + if (rc) > + return rc; > + > + if (val == true && !mhp_supports_memmap_on_memory()) { > + dev_dbg(dev, "memmap_on_memory is not available\n"); > + return -EOPNOTSUPP; > + } > + > + rc = down_write_killable(&dax_dev_rwsem); > + if (rc) > + return rc; > + > + if (dev_dax->memmap_on_memory != val && dev->driver && > + to_dax_drv(dev->driver)->type == DAXDRV_KMEM_TYPE) { > + up_write(&dax_dev_rwsem); > + return -EBUSY; > + } > + > + dev_dax->memmap_on_memory = val; > + up_write(&dax_dev_rwsem); > + > + return len; > +} > +static DEVICE_ATTR_RW(memmap_on_memory); > + > static umode_t dev_dax_visible(struct kobject *kobj, struct attribute *a, int n) > { > struct device *dev = container_of(kobj, struct device, kobj); > @@ -1375,6 +1417,7 @@ static struct attribute *dev_dax_attributes[] = { > &dev_attr_align.attr, > &dev_attr_resource.attr, > &dev_attr_numa_node.attr, > + &dev_attr_memmap_on_memory.attr, > NULL, > }; > > diff --git a/Documentation/ABI/testing/sysfs-bus-dax b/Documentation/ABI/testing/sysfs-bus-dax > index 6359f7bc9bf4..b34266bfae49 100644 > --- a/Documentation/ABI/testing/sysfs-bus-dax > +++ b/Documentation/ABI/testing/sysfs-bus-dax > @@ -134,3 +134,20 @@ KernelVersion: v5.1 > Contact: nvdimm@lists.linux.dev > Description: > (RO) The id attribute indicates the region id of a dax region. > + > +What: /sys/bus/dax/devices/daxX.Y/memmap_on_memory > +Date: January, 2024 > +KernelVersion: v6.8 > +Contact: nvdimm@lists.linux.dev > +Description: > + (RW) Control the memmap_on_memory setting if the dax device > + were to be hotplugged as system memory. This determines whether > + the 'altmap' for the hotplugged memory will be placed on the > + device being hotplugged (memmap_on_memory=1) or if it will be > + placed on regular memory (memmap_on_memory=0). This attribute > + must be set before the device is handed over to the 'kmem' > + driver (i.e. hotplugged into system-ram). Additionally, this > + depends on CONFIG_MHP_MEMMAP_ON_MEMORY, and a globally enabled > + memmap_on_memory parameter for memory_hotplug. This is > + typically set on the kernel command line - > + memory_hotplug.memmap_on_memory set to 'true' or 'force'." > > -- > 2.43.0 > >
diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c index 0fd948a4443e..27c86d0ca711 100644 --- a/drivers/dax/bus.c +++ b/drivers/dax/bus.c @@ -1349,6 +1349,48 @@ static ssize_t numa_node_show(struct device *dev, } static DEVICE_ATTR_RO(numa_node); +static ssize_t memmap_on_memory_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dev_dax *dev_dax = to_dev_dax(dev); + + return sysfs_emit(buf, "%d\n", dev_dax->memmap_on_memory); +} + +static ssize_t memmap_on_memory_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct dev_dax *dev_dax = to_dev_dax(dev); + bool val; + int rc; + + rc = kstrtobool(buf, &val); + if (rc) + return rc; + + if (val == true && !mhp_supports_memmap_on_memory()) { + dev_dbg(dev, "memmap_on_memory is not available\n"); + return -EOPNOTSUPP; + } + + rc = down_write_killable(&dax_dev_rwsem); + if (rc) + return rc; + + if (dev_dax->memmap_on_memory != val && dev->driver && + to_dax_drv(dev->driver)->type == DAXDRV_KMEM_TYPE) { + up_write(&dax_dev_rwsem); + return -EBUSY; + } + + dev_dax->memmap_on_memory = val; + up_write(&dax_dev_rwsem); + + return len; +} +static DEVICE_ATTR_RW(memmap_on_memory); + static umode_t dev_dax_visible(struct kobject *kobj, struct attribute *a, int n) { struct device *dev = container_of(kobj, struct device, kobj); @@ -1375,6 +1417,7 @@ static struct attribute *dev_dax_attributes[] = { &dev_attr_align.attr, &dev_attr_resource.attr, &dev_attr_numa_node.attr, + &dev_attr_memmap_on_memory.attr, NULL, }; diff --git a/Documentation/ABI/testing/sysfs-bus-dax b/Documentation/ABI/testing/sysfs-bus-dax index 6359f7bc9bf4..b34266bfae49 100644 --- a/Documentation/ABI/testing/sysfs-bus-dax +++ b/Documentation/ABI/testing/sysfs-bus-dax @@ -134,3 +134,20 @@ KernelVersion: v5.1 Contact: nvdimm@lists.linux.dev Description: (RO) The id attribute indicates the region id of a dax region. + +What: /sys/bus/dax/devices/daxX.Y/memmap_on_memory +Date: January, 2024 +KernelVersion: v6.8 +Contact: nvdimm@lists.linux.dev +Description: + (RW) Control the memmap_on_memory setting if the dax device + were to be hotplugged as system memory. This determines whether + the 'altmap' for the hotplugged memory will be placed on the + device being hotplugged (memmap_on_memory=1) or if it will be + placed on regular memory (memmap_on_memory=0). This attribute + must be set before the device is handed over to the 'kmem' + driver (i.e. hotplugged into system-ram). Additionally, this + depends on CONFIG_MHP_MEMMAP_ON_MEMORY, and a globally enabled + memmap_on_memory parameter for memory_hotplug. This is + typically set on the kernel command line - + memory_hotplug.memmap_on_memory set to 'true' or 'force'."