| Message ID | 20240127003607.501086-2-andre.draszik@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 8a96d2701f7c794e45102a9cc7fc4a5c4951e699 |
| Headers | show |
| Series | [1/5] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on | expand |
On Fri, Jan 26, 2024 at 6:37 PM André Draszik <andre.draszik@linaro.org> wrote: > > This pclk clock is required any time we access the pinctrl registers of > this block. > > Since pinctrl-samsung doesn't support a clock at the moment, we just > keep the kernel from disabling it at boot, until we have an update for > pinctrl-samsung to handle this required clock, at which point we'll be > able to drop the flag again. > > Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0") > Signed-off-by: André Draszik <andre.draszik@linaro.org> > --- Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> > drivers/clk/samsung/clk-gs101.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c > index 4a0520e825b6..61bb0dcf84ee 100644 > --- a/drivers/clk/samsung/clk-gs101.c > +++ b/drivers/clk/samsung/clk-gs101.c > @@ -2848,7 +2848,7 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = { > GATE(CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK, > "gout_peric0_gpio_peric0_pclk", "mout_peric0_bus_user", > CLK_CON_GAT_GOUT_BLK_PERIC0_UID_GPIO_PERIC0_IPCLKPORT_PCLK, > - 21, 0, 0), > + 21, CLK_IGNORE_UNUSED, 0), > /* Disabling this clock makes the system hang. Mark the clock as critical. */ > GATE(CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK, > "gout_peric0_lhm_axi_p_peric0_i_clk", "mout_peric0_bus_user", > -- > 2.43.0.429.g432eaa2c6b-goog >
On 1/27/24 00:35, André Draszik wrote: > This pclk clock is required any time we access the pinctrl registers of > this block. > > Since pinctrl-samsung doesn't support a clock at the moment, we just > keep the kernel from disabling it at boot, until we have an update for > pinctrl-samsung to handle this required clock, at which point we'll be > able to drop the flag again. > > Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0") > Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> > --- > drivers/clk/samsung/clk-gs101.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c > index 4a0520e825b6..61bb0dcf84ee 100644 > --- a/drivers/clk/samsung/clk-gs101.c > +++ b/drivers/clk/samsung/clk-gs101.c > @@ -2848,7 +2848,7 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = { > GATE(CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK, > "gout_peric0_gpio_peric0_pclk", "mout_peric0_bus_user", > CLK_CON_GAT_GOUT_BLK_PERIC0_UID_GPIO_PERIC0_IPCLKPORT_PCLK, > - 21, 0, 0), > + 21, CLK_IGNORE_UNUSED, 0), > /* Disabling this clock makes the system hang. Mark the clock as critical. */ > GATE(CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK, > "gout_peric0_lhm_axi_p_peric0_i_clk", "mout_peric0_bus_user",
On Sat, 27 Jan 2024 at 00:37, André Draszik <andre.draszik@linaro.org> wrote: > > This pclk clock is required any time we access the pinctrl registers of > this block. > > Since pinctrl-samsung doesn't support a clock at the moment, we just > keep the kernel from disabling it at boot, until we have an update for > pinctrl-samsung to handle this required clock, at which point we'll be > able to drop the flag again. > > Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0") > Signed-off-by: André Draszik <andre.draszik@linaro.org> > --- Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c index 4a0520e825b6..61bb0dcf84ee 100644 --- a/drivers/clk/samsung/clk-gs101.c +++ b/drivers/clk/samsung/clk-gs101.c @@ -2848,7 +2848,7 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = { GATE(CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK, "gout_peric0_gpio_peric0_pclk", "mout_peric0_bus_user", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_GPIO_PERIC0_IPCLKPORT_PCLK, - 21, 0, 0), + 21, CLK_IGNORE_UNUSED, 0), /* Disabling this clock makes the system hang. Mark the clock as critical. */ GATE(CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK, "gout_peric0_lhm_axi_p_peric0_i_clk", "mout_peric0_bus_user",
This pclk clock is required any time we access the pinctrl registers of this block. Since pinctrl-samsung doesn't support a clock at the moment, we just keep the kernel from disabling it at boot, until we have an update for pinctrl-samsung to handle this required clock, at which point we'll be able to drop the flag again. Fixes: 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0") Signed-off-by: André Draszik <andre.draszik@linaro.org> --- drivers/clk/samsung/clk-gs101.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)