diff mbox series

[v7,1/5] dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs

Message ID 20240202175538.1705-2-hnagalla@ti.com (mailing list archive)
State New, archived
Headers show
Series TI K3 M4F support on AM64x and AM62x SoCs | expand

Commit Message

Hari Nagalla Feb. 2, 2024, 5:55 p.m. UTC
K3 AM64x SoC has a Cortex M4F subsystem in the MCU voltage domain.
The remote processor's life cycle management and IPC mechanisms are
similar across the R5F and M4F cores from remote processor driver
point of view. However, there are subtle differences in image loading
and starting the M4F subsystems.

The YAML binding document provides the various node properties to be
configured by the consumers of the M4F subsystem.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
---
Changes since v1:
 - Spelling corrections
 - Corrected to pass DT checks

Changes since v2:
 - Missed spelling correction to commit message

Changes since v3:
 - Removed unnecessary descriptions and used generic memory region names
 - Made mboxes and memory-region optional
 - Removed unrelated items from examples

Changes since v4:
 - Rebased to the latest kernel-next tree
 - Added optional sram memory region for m4f device node

Changes since v5:
 - None

Changes since v6:
 - Removed blank line, fixed type for firm-ware property and binding check
   errors.

link to v6:
  https://lore.kernel.org/all/20230913111644.29889-2-hnagalla@ti.com/

 .../bindings/remoteproc/ti,k3-m4f-rproc.yaml  | 138 ++++++++++++++++++
 1 file changed, 138 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml

Comments

Rob Herring Feb. 2, 2024, 7:15 p.m. UTC | #1
On Fri, 02 Feb 2024 11:55:34 -0600, Hari Nagalla wrote:
> K3 AM64x SoC has a Cortex M4F subsystem in the MCU voltage domain.
> The remote processor's life cycle management and IPC mechanisms are
> similar across the R5F and M4F cores from remote processor driver
> point of view. However, there are subtle differences in image loading
> and starting the M4F subsystems.
> 
> The YAML binding document provides the various node properties to be
> configured by the consumers of the M4F subsystem.
> 
> Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
> ---
> Changes since v1:
>  - Spelling corrections
>  - Corrected to pass DT checks
> 
> Changes since v2:
>  - Missed spelling correction to commit message
> 
> Changes since v3:
>  - Removed unnecessary descriptions and used generic memory region names
>  - Made mboxes and memory-region optional
>  - Removed unrelated items from examples
> 
> Changes since v4:
>  - Rebased to the latest kernel-next tree
>  - Added optional sram memory region for m4f device node
> 
> Changes since v5:
>  - None
> 
> Changes since v6:
>  - Removed blank line, fixed type for firm-ware property and binding check
>    errors.
> 
> link to v6:
>   https://lore.kernel.org/all/20230913111644.29889-2-hnagalla@ti.com/
> 
>  .../bindings/remoteproc/ti,k3-m4f-rproc.yaml  | 138 ++++++++++++++++++
>  1 file changed, 138 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml references a file that doesn't exist: Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml: Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240202175538.1705-2-hnagalla@ti.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Rob Herring Feb. 2, 2024, 9:50 p.m. UTC | #2
On Fri, Feb 02, 2024 at 11:55:34AM -0600, Hari Nagalla wrote:
> K3 AM64x SoC has a Cortex M4F subsystem in the MCU voltage domain.
> The remote processor's life cycle management and IPC mechanisms are
> similar across the R5F and M4F cores from remote processor driver
> point of view. However, there are subtle differences in image loading
> and starting the M4F subsystems.
> 
> The YAML binding document provides the various node properties to be
> configured by the consumers of the M4F subsystem.
> 
> Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
> ---
> Changes since v1:
>  - Spelling corrections
>  - Corrected to pass DT checks
> 
> Changes since v2:
>  - Missed spelling correction to commit message
> 
> Changes since v3:
>  - Removed unnecessary descriptions and used generic memory region names
>  - Made mboxes and memory-region optional
>  - Removed unrelated items from examples
> 
> Changes since v4:
>  - Rebased to the latest kernel-next tree
>  - Added optional sram memory region for m4f device node
> 
> Changes since v5:
>  - None
> 
> Changes since v6:
>  - Removed blank line, fixed type for firm-ware property and binding check
>    errors.
> 
> link to v6:
>   https://lore.kernel.org/all/20230913111644.29889-2-hnagalla@ti.com/
> 
>  .../bindings/remoteproc/ti,k3-m4f-rproc.yaml  | 138 ++++++++++++++++++
>  1 file changed, 138 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml
> new file mode 100644
> index 000000000000..645dbce3773b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml
> @@ -0,0 +1,138 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/ti,k3-m4f-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI K3 M4F processor subsystems
> +
> +maintainers:
> +  - Hari Nagalla <hnagalla@ti.com>
> +  - Mathieu Poirier <mathieu.poirier@linaro.org>
> +
> +description: |
> +  Some K3 family SoCs have Arm Cortex M4F cores. AM64x is a SoC in K3
> +  family with a M4F core. Typically safety oriented applications may use
> +  the M4F core in isolation without an IPC. Where as some industrial and
> +  home automation applications, may use the M4F core as a remote processor
> +  with IPC communications.
> +
> +$ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,am64-m4fss
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 2
> +
> +  "#size-cells":
> +    const: 2
> +
> +  reg:
> +    items:
> +      - description: IRAM internal memory region
> +      - description: DRAM internal memory region
> +
> +  reg-names:
> +    items:
> +      - const: iram
> +      - const: dram
> +
> +  resets:
> +    maxItems: 1
> +
> +  firmware-name:
> +    maxItems: 1
> +    description: Name of firmware to load for the M4F core
> +
> +  mboxes:
> +    description: |

Don't need '|' if no formatting.

> +      OMAP Mailbox specifier denoting the sub-mailbox, to be used for
> +      communication with the remote processor. This property should match
> +      with the sub-mailbox node used in the firmware image.
> +    maxItems: 1
> +
> +  memory-region:
> +    description: |
> +      phandle to the reserved memory nodes to be associated with the
> +      remoteproc device. The reserved memory nodes should be carveout nodes,
> +      and should be defined with a "no-map" property as per the bindings in
> +      Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml

This has moved to dtschema. I'd just drop the file name.

> +      Optional memory regions available for firmware specific purposes.
> +    maxItems: 8
> +    items:
> +      - description: regions used for DMA allocations like vrings, vring buffers
> +                     and memory dedicated to firmware's specific purposes.
> +    additionalItems: true

I think you want just:

minItems: 1
maxItems: 8

> +
> +  sram:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    maxItems: 4
> +    items:
> +      maxItems: 1
> +    description: |
> +      phandles to reserved on-chip SRAM regions. The regions should be
> +      defined as child nodes of the respective SRAM node, and
> +      should be defined as per the generic bindings in,
> +      Documentation/devicetree/bindings/sram/sram.yaml
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - ti,sci
> +  - ti,sci-dev-id
> +  - ti,sci-proc-ids
> +  - resets
> +  - firmware-name
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    reserved-memory {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
> +            compatible = "shared-dma-pool";
> +            reg = <0x00 0x9cb00000 0x00 0x100000>;
> +            no-map;
> +        };
> +
> +        mcu_m4fss_memory_region: m4f-memory@9cc00000 {
> +            compatible = "shared-dma-pool";
> +            reg = <0x00 0x9cc00000 0x00 0xe00000>;
> +            no-map;
> +        };
> +    };
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        mailbox0_cluster0: mailbox-0 {
> +            #mbox-cells = <1>;
> +        };
> +
> +        remoteproc@5000000 {
> +            compatible = "ti,am64-m4fss";
> +            reg = <0x00 0x5000000 0x00 0x30000>,
> +                  <0x00 0x5040000 0x00 0x10000>;
> +            reg-names = "iram", "dram";
> +            ti,sci = <&dmsc>;
> +            ti,sci-dev-id = <9>;
> +            ti,sci-proc-ids = <0x18 0xff>;
> +            resets = <&k3_reset 9 1>;
> +            firmware-name = "am62-mcu-m4f0_0-fw";
> +            mboxes = <&mailbox0_cluster0>, <&mbox_m4_0>;
> +            memory-region = <&mcu_m4fss_dma_memory_region>,
> +                            <&mcu_m4fss_memory_region>;
> +            sram = <&oc_sram>;
> +         };
> +    };
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml
new file mode 100644
index 000000000000..645dbce3773b
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml
@@ -0,0 +1,138 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/ti,k3-m4f-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI K3 M4F processor subsystems
+
+maintainers:
+  - Hari Nagalla <hnagalla@ti.com>
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+
+description: |
+  Some K3 family SoCs have Arm Cortex M4F cores. AM64x is a SoC in K3
+  family with a M4F core. Typically safety oriented applications may use
+  the M4F core in isolation without an IPC. Where as some industrial and
+  home automation applications, may use the M4F core as a remote processor
+  with IPC communications.
+
+$ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am64-m4fss
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  reg:
+    items:
+      - description: IRAM internal memory region
+      - description: DRAM internal memory region
+
+  reg-names:
+    items:
+      - const: iram
+      - const: dram
+
+  resets:
+    maxItems: 1
+
+  firmware-name:
+    maxItems: 1
+    description: Name of firmware to load for the M4F core
+
+  mboxes:
+    description: |
+      OMAP Mailbox specifier denoting the sub-mailbox, to be used for
+      communication with the remote processor. This property should match
+      with the sub-mailbox node used in the firmware image.
+    maxItems: 1
+
+  memory-region:
+    description: |
+      phandle to the reserved memory nodes to be associated with the
+      remoteproc device. The reserved memory nodes should be carveout nodes,
+      and should be defined with a "no-map" property as per the bindings in
+      Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
+      Optional memory regions available for firmware specific purposes.
+    maxItems: 8
+    items:
+      - description: regions used for DMA allocations like vrings, vring buffers
+                     and memory dedicated to firmware's specific purposes.
+    additionalItems: true
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 4
+    items:
+      maxItems: 1
+    description: |
+      phandles to reserved on-chip SRAM regions. The regions should be
+      defined as child nodes of the respective SRAM node, and
+      should be defined as per the generic bindings in,
+      Documentation/devicetree/bindings/sram/sram.yaml
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,sci-proc-ids
+  - resets
+  - firmware-name
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
+            compatible = "shared-dma-pool";
+            reg = <0x00 0x9cb00000 0x00 0x100000>;
+            no-map;
+        };
+
+        mcu_m4fss_memory_region: m4f-memory@9cc00000 {
+            compatible = "shared-dma-pool";
+            reg = <0x00 0x9cc00000 0x00 0xe00000>;
+            no-map;
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mailbox0_cluster0: mailbox-0 {
+            #mbox-cells = <1>;
+        };
+
+        remoteproc@5000000 {
+            compatible = "ti,am64-m4fss";
+            reg = <0x00 0x5000000 0x00 0x30000>,
+                  <0x00 0x5040000 0x00 0x10000>;
+            reg-names = "iram", "dram";
+            ti,sci = <&dmsc>;
+            ti,sci-dev-id = <9>;
+            ti,sci-proc-ids = <0x18 0xff>;
+            resets = <&k3_reset 9 1>;
+            firmware-name = "am62-mcu-m4f0_0-fw";
+            mboxes = <&mailbox0_cluster0>, <&mbox_m4_0>;
+            memory-region = <&mcu_m4fss_dma_memory_region>,
+                            <&mcu_m4fss_memory_region>;
+            sram = <&oc_sram>;
+         };
+    };