Message ID | 20231223221213.774868-5-andreas@kemnade.info (mailing list archive) |
---|---|
State | Mainlined |
Commit | a2921599ecfae1bd627d0f2692dd3e26a3182863 |
Headers | show |
Series | Input: zforce_ts: standard properties | expand |
On Sat, Dec 23, 2023 at 11:12:13PM +0100, Andreas Kemnade wrote: > The display is in landscape orientation, but the touchscreen is in portrait > orientation. Specify that properly in the devicetree. This needs to be merged by the board maintainer. > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> > --- > arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts > index 815119c12bd48..5636fb3661e8a 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts > +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts > @@ -141,8 +141,10 @@ zforce: touchscreen@50 { > interrupts = <6 IRQ_TYPE_EDGE_FALLING>; Could you please prepare a patch changing this to IRQ_TYPE_LEVEL_LOW to match what the driver is actually doing? > vdd-supply = <&ldo1_reg>; > reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; > - x-size = <1072>; > - y-size = <1448>; > + touchscreen-size-x = <1072>; > + touchscreen-size-y = <1448>; > + touchscreen-swapped-x-y; > + touchscreen-inverted-x; > }; > > /* TODO: TPS65185 PMIC for E Ink at 0x68 */ > -- > 2.39.2 > Thanks.
On Sat, Dec 23, 2023 at 11:12:13PM +0100, Andreas Kemnade wrote: > The display is in landscape orientation, but the touchscreen is in portrait > orientation. Specify that properly in the devicetree. > > Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Applied, thanks!
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts index 815119c12bd48..5636fb3661e8a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts @@ -141,8 +141,10 @@ zforce: touchscreen@50 { interrupts = <6 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&ldo1_reg>; reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; - x-size = <1072>; - y-size = <1448>; + touchscreen-size-x = <1072>; + touchscreen-size-y = <1448>; + touchscreen-swapped-x-y; + touchscreen-inverted-x; }; /* TODO: TPS65185 PMIC for E Ink at 0x68 */
The display is in landscape orientation, but the touchscreen is in portrait orientation. Specify that properly in the devicetree. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> --- arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)