diff mbox series

[v2,2/2] spi: fsl-dspi: Unify error messaging in dspi_request_dma()

Message ID 20240204203127.1186621-3-andy.shevchenko@gmail.com (mailing list archive)
State Accepted
Commit 51b8e79c45d5a42891c6196dcd3f73cbb599940a
Headers show
Series spi: fsl-dspi: A couple of error handling improvements | expand

Commit Message

Andy Shevchenko Feb. 4, 2024, 8:29 p.m. UTC 
Use dev_err_probe() for all messages in dspi_request_dma() for the sake of
making them uniform. While at it, fix indentation issue reported by Vladimir
Oltean.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/spi/spi-fsl-dspi.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

Comments

Vladimir Oltean Feb. 5, 2024, 11:12 a.m. UTC | #1 
On Sun, Feb 04, 2024 at 10:29:19PM +0200, andy.shevchenko@gmail.com wrote:
> Use dev_err_probe() for all messages in dspi_request_dma() for the sake of
> making them uniform. While at it, fix indentation issue reported by Vladimir
> Oltean.
> 
> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
diff mbox series

Patch

diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 0b5ea7a7da71..38defdcf9370 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -502,15 +502,12 @@  static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
 		return -ENOMEM;
 
 	dma->chan_rx = dma_request_chan(dev, "rx");
-	if (IS_ERR(dma->chan_rx)) {
-		return dev_err_probe(dev, PTR_ERR(dma->chan_rx),
-			"rx dma channel not available\n");
-	}
+	if (IS_ERR(dma->chan_rx))
+		return dev_err_probe(dev, PTR_ERR(dma->chan_rx), "rx dma channel not available\n");
 
 	dma->chan_tx = dma_request_chan(dev, "tx");
 	if (IS_ERR(dma->chan_tx)) {
-		ret = PTR_ERR(dma->chan_tx);
-		dev_err_probe(dev, ret, "tx dma channel not available\n");
+		ret = dev_err_probe(dev, PTR_ERR(dma->chan_tx), "tx dma channel not available\n");
 		goto err_tx_channel;
 	}
 
@@ -541,14 +538,14 @@  static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
 	cfg.direction = DMA_DEV_TO_MEM;
 	ret = dmaengine_slave_config(dma->chan_rx, &cfg);
 	if (ret) {
-		dev_err(dev, "can't configure rx dma channel\n");
+		dev_err_probe(dev, ret, "can't configure rx dma channel\n");
 		goto err_slave_config;
 	}
 
 	cfg.direction = DMA_MEM_TO_DEV;
 	ret = dmaengine_slave_config(dma->chan_tx, &cfg);
 	if (ret) {
-		dev_err(dev, "can't configure tx dma channel\n");
+		dev_err_probe(dev, ret, "can't configure tx dma channel\n");
 		goto err_slave_config;
 	}