[v1,0/2] arm64: dts: freescale: imx8qm: add apalis eval v1.2 carrier board

Message

Francesco Dolcini Jan. 25, 2024, 10:14 a.m. UTC

From: Francesco Dolcini <[e-mail]>

This series introduces support for the new Apalis Evaluation Board v1.2
for imx8qm-based Toradex SoM. With the introduction of board v1.2, a common
board configurations dtsi file and two version-specific dtsi board files were
added. Consequently, four possible dts files are generated to support the
range of different SoM versions. Additionally, updates have been made to dts
freescale/Makefile and arm/fsl.yaml to accommodate the changes.


Joao Paulo Goncalves (2):
  dt-bindings: arm: fsl: add imx8qm apalis eval v1.2 carrier board
  arm64: dts: freescale: imx8qm: add apalis eval v1.2 carrier board

 .../devicetree/bindings/arm/fsl.yaml          |   6 +-
 arch/arm64/boot/dts/freescale/Makefile        |   2 +
 .../dts/freescale/imx8-apalis-eval-v1.1.dtsi  |  26 ++++
 .../dts/freescale/imx8-apalis-eval-v1.2.dtsi  | 124 ++++++++++++++++++
 .../boot/dts/freescale/imx8-apalis-eval.dtsi  |  22 ----
 .../dts/freescale/imx8qm-apalis-eval-v1.2.dts |  16 +++
 .../boot/dts/freescale/imx8qm-apalis-eval.dts |   2 +-
 .../imx8qm-apalis-v1.1-eval-v1.2.dts          |  26 ++++
 .../dts/freescale/imx8qm-apalis-v1.1-eval.dts |   2 +-
 9 files changed, 200 insertions(+), 26 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.1.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-apalis-eval-v1.2.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-eval-v1.2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval-v1.2.dts

Comments

Shawn Guo Feb. 6, 2024, 8:23 a.m. UTC | #1

On Thu, Jan 25, 2024 at 11:14:55AM +0100, Francesco Dolcini wrote:
> From: Francesco Dolcini <[e-mail]>
> 
> This series introduces support for the new Apalis Evaluation Board v1.2
> for imx8qm-based Toradex SoM. With the introduction of board v1.2, a common
> board configurations dtsi file and two version-specific dtsi board files were
> added. Consequently, four possible dts files are generated to support the
> range of different SoM versions. Additionally, updates have been made to dts
> freescale/Makefile and arm/fsl.yaml to accommodate the changes.
> 
> 
> Joao Paulo Goncalves (2):
>   dt-bindings: arm: fsl: add imx8qm apalis eval v1.2 carrier board
>   arm64: dts: freescale: imx8qm: add apalis eval v1.2 carrier board

Applied both, thanks!