@@ -2362,13 +2362,13 @@ static void tg3_eee_pull_config(struct tg3 *tp, struct ethtool_keee *eee)
/* Pull lp advertised settings */
if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE, &val))
return;
- dest->lp_advertised_u32 = mmd_eee_adv_to_ethtool_adv_t(val);
+ mii_eee_cap1_mod_linkmode_t(dest->lp_advertised, val);
/* Pull advertised and eee_enabled settings */
if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, &val))
return;
dest->eee_enabled = !!val;
- dest->advertised_u32 = mmd_eee_adv_to_ethtool_adv_t(val);
+ mii_eee_cap1_mod_linkmode_t(dest->advertised, val);
/* Pull tx_lpi_enabled */
val = tr32(TG3_CPMU_EEE_MODE);
@@ -4364,11 +4364,9 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl)
if (!tp->eee.eee_enabled) {
val = 0;
- tp->eee.advertised_u32 = 0;
+ linkmode_zero(tp->eee.advertised);
} else {
- tp->eee.advertised_u32 = advertise &
- (ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Full);
+ mii_eee_cap1_mod_linkmode_t(tp->eee.advertised, val);
}
err = tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
@@ -4626,13 +4624,13 @@ static bool tg3_phy_eee_config_ok(struct tg3 *tp)
tg3_eee_pull_config(tp, &eee);
if (tp->eee.eee_enabled) {
- if (tp->eee.advertised_u32 != eee.advertised_u32 ||
+ if (!linkmode_equal(tp->eee.advertised, eee.advertised) ||
tp->eee.tx_lpi_timer != eee.tx_lpi_timer ||
tp->eee.tx_lpi_enabled != eee.tx_lpi_enabled)
return false;
} else {
/* EEE is disabled but we're advertising */
- if (eee.advertised_u32)
+ if (!linkmode_empty(eee.advertised))
return false;
}
@@ -14189,7 +14187,7 @@ static int tg3_set_eee(struct net_device *dev, struct ethtool_keee *edata)
return -EOPNOTSUPP;
}
- if (edata->advertised_u32 != tp->eee.advertised_u32) {
+ if (!linkmode_equal(edata->advertised, tp->eee.advertised)) {
netdev_warn(tp->dev,
"Direct manipulation of EEE advertisement is not supported\n");
return -EINVAL;
@@ -15655,10 +15653,13 @@ static int tg3_phy_probe(struct tg3 *tp)
tg3_chip_rev_id(tp) != CHIPREV_ID_57765_A0))) {
tp->phy_flags |= TG3_PHYFLG_EEE_CAP;
- tp->eee.supported_u32 = SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full;
- tp->eee.advertised_u32 = ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Full;
+ linkmode_zero(tp->eee.supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ tp->eee.supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ tp->eee.supported);
+ linkmode_copy(tp->eee.advertised, tp->eee.supported);
+
tp->eee.eee_enabled = 1;
tp->eee.tx_lpi_enabled = 1;
tp->eee.tx_lpi_timer = TG3_CPMU_DBTMR1_LNKIDLE_2047US;
Convert EEE handling to use linkmode bitmaps. This prepares for removing the legacy bitmaps from struct ethtool_keee. No functional change intended. Note: The change to mii_eee_cap1_mod_linkmode_t(tp->eee.advertised, val) in tg3_phy_autoneg_cfg() isn't completely obvious, but it doesn't change the current functionality. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/net/ethernet/broadcom/tg3.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-)