| Message ID | 20240129-x1e80100-display-v1-3-0d9eb8254df0@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/msm: Add display support for X1E80100 | expand |
On Mon, 29 Jan 2024 at 15:19, Abel Vesa <abel.vesa@linaro.org> wrote: > > Add support for MDSS on X1E80100. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > drivers/gpu/drm/msm/msm_mdss.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c > index 455b2e3a0cdd..eddf7fdbb60a 100644 > --- a/drivers/gpu/drm/msm/msm_mdss.c > +++ b/drivers/gpu/drm/msm/msm_mdss.c > @@ -564,6 +564,15 @@ static const struct msm_mdss_data sdm670_data = { > .highest_bank_bit = 1, > }; > > +static const struct msm_mdss_data x1e80100_data = { > + .ubwc_enc_version = UBWC_4_0, > + .ubwc_dec_version = UBWC_4_3, > + .ubwc_swizzle = 6, > + .ubwc_static = 1, > + .highest_bank_bit = 2, > + .macrotile_mode = 1, Missing .reg_bus_bw, LGTM otherwise > +}; > + > static const struct msm_mdss_data sdm845_data = { > .ubwc_enc_version = UBWC_2_0, > .ubwc_dec_version = UBWC_2_0, > @@ -655,6 +664,7 @@ static const struct of_device_id mdss_dt_match[] = { > { .compatible = "qcom,sm8450-mdss", .data = &sm8350_data }, > { .compatible = "qcom,sm8550-mdss", .data = &sm8550_data }, > { .compatible = "qcom,sm8650-mdss", .data = &sm8550_data}, > + { .compatible = "qcom,x1e80100-mdss", .data = &x1e80100_data}, > {} > }; > MODULE_DEVICE_TABLE(of, mdss_dt_match); > > -- > 2.34.1 >
On 24-01-29 17:11:25, Dmitry Baryshkov wrote: > On Mon, 29 Jan 2024 at 15:19, Abel Vesa <abel.vesa@linaro.org> wrote: > > > > Add support for MDSS on X1E80100. > > > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > > --- > > drivers/gpu/drm/msm/msm_mdss.c | 10 ++++++++++ > > 1 file changed, 10 insertions(+) > > > > diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c > > index 455b2e3a0cdd..eddf7fdbb60a 100644 > > --- a/drivers/gpu/drm/msm/msm_mdss.c > > +++ b/drivers/gpu/drm/msm/msm_mdss.c > > @@ -564,6 +564,15 @@ static const struct msm_mdss_data sdm670_data = { > > .highest_bank_bit = 1, > > }; > > > > +static const struct msm_mdss_data x1e80100_data = { > > + .ubwc_enc_version = UBWC_4_0, > > + .ubwc_dec_version = UBWC_4_3, > > + .ubwc_swizzle = 6, > > + .ubwc_static = 1, > > + .highest_bank_bit = 2, > > + .macrotile_mode = 1, > > Missing .reg_bus_bw, LGTM otherwise Dmitry, I do not have the exact value yet. Can I come back with a subsequent (different) patch to add it at a later stage when I have that information? I see no point in holding display support any further since it works fine with the default bandwith. If yes, I'll respin this series right away, but without the reg_bus_bw. > > > +}; > > + > > static const struct msm_mdss_data sdm845_data = { > > .ubwc_enc_version = UBWC_2_0, > > .ubwc_dec_version = UBWC_2_0, > > @@ -655,6 +664,7 @@ static const struct of_device_id mdss_dt_match[] = { > > { .compatible = "qcom,sm8450-mdss", .data = &sm8350_data }, > > { .compatible = "qcom,sm8550-mdss", .data = &sm8550_data }, > > { .compatible = "qcom,sm8650-mdss", .data = &sm8550_data}, > > + { .compatible = "qcom,x1e80100-mdss", .data = &x1e80100_data}, > > {} > > }; > > MODULE_DEVICE_TABLE(of, mdss_dt_match); > > > > -- > > 2.34.1 > > > > > -- > With best wishes > Dmitry
On Thu, 8 Feb 2024 at 15:37, Abel Vesa <abel.vesa@linaro.org> wrote: > > On 24-01-29 17:11:25, Dmitry Baryshkov wrote: > > On Mon, 29 Jan 2024 at 15:19, Abel Vesa <abel.vesa@linaro.org> wrote: > > > > > > Add support for MDSS on X1E80100. > > > > > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > > > --- > > > drivers/gpu/drm/msm/msm_mdss.c | 10 ++++++++++ > > > 1 file changed, 10 insertions(+) > > > > > > diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c > > > index 455b2e3a0cdd..eddf7fdbb60a 100644 > > > --- a/drivers/gpu/drm/msm/msm_mdss.c > > > +++ b/drivers/gpu/drm/msm/msm_mdss.c > > > @@ -564,6 +564,15 @@ static const struct msm_mdss_data sdm670_data = { > > > .highest_bank_bit = 1, > > > }; > > > > > > +static const struct msm_mdss_data x1e80100_data = { > > > + .ubwc_enc_version = UBWC_4_0, > > > + .ubwc_dec_version = UBWC_4_3, > > > + .ubwc_swizzle = 6, > > > + .ubwc_static = 1, > > > + .highest_bank_bit = 2, > > > + .macrotile_mode = 1, > > > > Missing .reg_bus_bw, LGTM otherwise > > Dmitry, I do not have the exact value yet. > > Can I come back with a subsequent (different) patch to add it at a later stage > when I have that information? > > I see no point in holding display support any further since it works > fine with the default bandwith. > > If yes, I'll respin this series right away, but without the reg_bus_bw. Please add a TODO or FIXME comment there. > > > > > > +}; > > > + > > > static const struct msm_mdss_data sdm845_data = { > > > .ubwc_enc_version = UBWC_2_0, > > > .ubwc_dec_version = UBWC_2_0, > > > @@ -655,6 +664,7 @@ static const struct of_device_id mdss_dt_match[] = { > > > { .compatible = "qcom,sm8450-mdss", .data = &sm8350_data }, > > > { .compatible = "qcom,sm8550-mdss", .data = &sm8550_data }, > > > { .compatible = "qcom,sm8650-mdss", .data = &sm8550_data}, > > > + { .compatible = "qcom,x1e80100-mdss", .data = &x1e80100_data}, > > > {} > > > }; > > > MODULE_DEVICE_TABLE(of, mdss_dt_match); > > > > > > -- > > > 2.34.1 > > > > > > > > > -- > > With best wishes > > Dmitry
On 24-02-08 15:42:04, Dmitry Baryshkov wrote: > On Thu, 8 Feb 2024 at 15:37, Abel Vesa <abel.vesa@linaro.org> wrote: > > > > On 24-01-29 17:11:25, Dmitry Baryshkov wrote: > > > On Mon, 29 Jan 2024 at 15:19, Abel Vesa <abel.vesa@linaro.org> wrote: > > > > > > > > Add support for MDSS on X1E80100. > > > > > > > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > > > > --- > > > > drivers/gpu/drm/msm/msm_mdss.c | 10 ++++++++++ > > > > 1 file changed, 10 insertions(+) > > > > > > > > diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c > > > > index 455b2e3a0cdd..eddf7fdbb60a 100644 > > > > --- a/drivers/gpu/drm/msm/msm_mdss.c > > > > +++ b/drivers/gpu/drm/msm/msm_mdss.c > > > > @@ -564,6 +564,15 @@ static const struct msm_mdss_data sdm670_data = { > > > > .highest_bank_bit = 1, > > > > }; > > > > > > > > +static const struct msm_mdss_data x1e80100_data = { > > > > + .ubwc_enc_version = UBWC_4_0, > > > > + .ubwc_dec_version = UBWC_4_3, > > > > + .ubwc_swizzle = 6, > > > > + .ubwc_static = 1, > > > > + .highest_bank_bit = 2, > > > > + .macrotile_mode = 1, > > > > > > Missing .reg_bus_bw, LGTM otherwise > > > > Dmitry, I do not have the exact value yet. > > > > Can I come back with a subsequent (different) patch to add it at a later stage > > when I have that information? > > > > I see no point in holding display support any further since it works > > fine with the default bandwith. > > > > If yes, I'll respin this series right away, but without the reg_bus_bw. > > Please add a TODO or FIXME comment there. Sure thing. Thanks. > > > > > > > > > > +}; > > > > + > > > > static const struct msm_mdss_data sdm845_data = { > > > > .ubwc_enc_version = UBWC_2_0, > > > > .ubwc_dec_version = UBWC_2_0, > > > > @@ -655,6 +664,7 @@ static const struct of_device_id mdss_dt_match[] = { > > > > { .compatible = "qcom,sm8450-mdss", .data = &sm8350_data }, > > > > { .compatible = "qcom,sm8550-mdss", .data = &sm8550_data }, > > > > { .compatible = "qcom,sm8650-mdss", .data = &sm8550_data}, > > > > + { .compatible = "qcom,x1e80100-mdss", .data = &x1e80100_data}, > > > > {} > > > > }; > > > > MODULE_DEVICE_TABLE(of, mdss_dt_match); > > > > > > > > -- > > > > 2.34.1 > > > > > > > > > > > > > -- > > > With best wishes > > > Dmitry > > > > -- > With best wishes > Dmitry
On 2/8/2024 5:46 AM, Abel Vesa wrote: > On 24-02-08 15:42:04, Dmitry Baryshkov wrote: >> On Thu, 8 Feb 2024 at 15:37, Abel Vesa <abel.vesa@linaro.org> wrote: >>> >>> On 24-01-29 17:11:25, Dmitry Baryshkov wrote: >>>> On Mon, 29 Jan 2024 at 15:19, Abel Vesa <abel.vesa@linaro.org> wrote: >>>>> >>>>> Add support for MDSS on X1E80100. >>>>> >>>>> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> >>>>> --- >>>>> drivers/gpu/drm/msm/msm_mdss.c | 10 ++++++++++ >>>>> 1 file changed, 10 insertions(+) >>>>> >>>>> diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c >>>>> index 455b2e3a0cdd..eddf7fdbb60a 100644 >>>>> --- a/drivers/gpu/drm/msm/msm_mdss.c >>>>> +++ b/drivers/gpu/drm/msm/msm_mdss.c >>>>> @@ -564,6 +564,15 @@ static const struct msm_mdss_data sdm670_data = { >>>>> .highest_bank_bit = 1, >>>>> }; >>>>> >>>>> +static const struct msm_mdss_data x1e80100_data = { >>>>> + .ubwc_enc_version = UBWC_4_0, >>>>> + .ubwc_dec_version = UBWC_4_3, >>>>> + .ubwc_swizzle = 6, >>>>> + .ubwc_static = 1, >>>>> + .highest_bank_bit = 2, >>>>> + .macrotile_mode = 1, >>>> >>>> Missing .reg_bus_bw, LGTM otherwise >>> >>> Dmitry, I do not have the exact value yet. >>> >>> Can I come back with a subsequent (different) patch to add it at a later stage >>> when I have that information? >>> >>> I see no point in holding display support any further since it works >>> fine with the default bandwith. >>> >>> If yes, I'll respin this series right away, but without the reg_bus_bw. >> >> Please add a TODO or FIXME comment there. > > Sure thing. Thanks. > I have not heard back from the clock team on the values. But, what I can confirm at this point is for basic functional display support, we could let it go back to the default value which we have hard-coded and fill up this entry later. >> >>> >>>> >>>>> +}; >>>>> + >>>>> static const struct msm_mdss_data sdm845_data = { >>>>> .ubwc_enc_version = UBWC_2_0, >>>>> .ubwc_dec_version = UBWC_2_0, >>>>> @@ -655,6 +664,7 @@ static const struct of_device_id mdss_dt_match[] = { >>>>> { .compatible = "qcom,sm8450-mdss", .data = &sm8350_data }, >>>>> { .compatible = "qcom,sm8550-mdss", .data = &sm8550_data }, >>>>> { .compatible = "qcom,sm8650-mdss", .data = &sm8550_data}, >>>>> + { .compatible = "qcom,x1e80100-mdss", .data = &x1e80100_data}, >>>>> {} >>>>> }; >>>>> MODULE_DEVICE_TABLE(of, mdss_dt_match); >>>>> >>>>> -- >>>>> 2.34.1 >>>>> >>>> >>>> >>>> -- >>>> With best wishes >>>> Dmitry >> >> >> >> -- >> With best wishes >> Dmitry
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c index 455b2e3a0cdd..eddf7fdbb60a 100644 --- a/drivers/gpu/drm/msm/msm_mdss.c +++ b/drivers/gpu/drm/msm/msm_mdss.c @@ -564,6 +564,15 @@ static const struct msm_mdss_data sdm670_data = { .highest_bank_bit = 1, }; +static const struct msm_mdss_data x1e80100_data = { + .ubwc_enc_version = UBWC_4_0, + .ubwc_dec_version = UBWC_4_3, + .ubwc_swizzle = 6, + .ubwc_static = 1, + .highest_bank_bit = 2, + .macrotile_mode = 1, +}; + static const struct msm_mdss_data sdm845_data = { .ubwc_enc_version = UBWC_2_0, .ubwc_dec_version = UBWC_2_0, @@ -655,6 +664,7 @@ static const struct of_device_id mdss_dt_match[] = { { .compatible = "qcom,sm8450-mdss", .data = &sm8350_data }, { .compatible = "qcom,sm8550-mdss", .data = &sm8550_data }, { .compatible = "qcom,sm8650-mdss", .data = &sm8550_data}, + { .compatible = "qcom,x1e80100-mdss", .data = &x1e80100_data}, {} }; MODULE_DEVICE_TABLE(of, mdss_dt_match);
Add support for MDSS on X1E80100. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- drivers/gpu/drm/msm/msm_mdss.c | 10 ++++++++++ 1 file changed, 10 insertions(+)