diff mbox series

[06/17] dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1>

Message ID 20240208124300.2740313-7-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series clk: renesas: rzg2l: Add support for power domains | expand

Commit Message

Claudiu Beznea Feb. 8, 2024, 12:42 p.m. UTC 
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

The driver will be modified (in the next commits) to be able to specify
individual power domain ID for each IP. Update the documentation to cope
with this.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
 .../devicetree/bindings/clock/renesas,rzg2l-cpg.yaml          | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Feb. 9, 2024, 7:56 a.m. UTC | #1 
On 08/02/2024 13:42, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> The driver will be modified (in the next commits) to be able to specify
> individual power domain ID for each IP. Update the documentation to cope
> with this.

You are affecting existing users, so you should explain that you keep
ABI intact or if you break it, why it is fine to do so.



Best regards,
Krzysztof
Claudiu Beznea Feb. 9, 2024, 11:57 a.m. UTC | #2 
On 09.02.2024 09:56, Krzysztof Kozlowski wrote:
> On 08/02/2024 13:42, Claudiu wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> The driver will be modified (in the next commits) to be able to specify
>> individual power domain ID for each IP. Update the documentation to cope
>> with this.
> 
> You are affecting existing users, so you should explain that you keep
> ABI intact or if you break it, why it is fine to do so.
> 

OK, I'll improve the description. The ABI will not be broken with the
changes in this series.

Thank you,
Claudiu Beznea

> 
> 
> Best regards,
> Krzysztof
>
Geert Uytterhoeven Feb. 16, 2024, 2:04 p.m. UTC | #3 
Hi Claudiu,

On Thu, Feb 8, 2024 at 1:43 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> The driver will be modified (in the next commits) to be able to specify
> individual power domain ID for each IP. Update the documentation to cope
> with this.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Thanks for your patch!

> --- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
> +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
> @@ -57,7 +57,7 @@ properties:
>        can be power-managed through Module Standby should refer to the CPG device
>        node in their "power-domains" property, as documented by the generic PM
>        Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
> -    const: 0
> +    const: 1

While the driver will soon support both 0 and 1, we may need to keep 0
for RZ/V2M for now?  RZ/V2M does not have CPG_BUS_*_MSTOP registers,
but uses the Internal Power Domain Controller (PMC).

Please add a link to the power domain numbers in
<dt-bindings/clock/r9a0*-cpg.h>,
like is done for #clock-cells.

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Claudiu Beznea Feb. 19, 2024, 8:18 a.m. UTC | #4 
On 16.02.2024 16:04, Geert Uytterhoeven wrote:
> Hi Claudiu,
> 
> On Thu, Feb 8, 2024 at 1:43 PM Claudiu <claudiu.beznea@tuxon.dev> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> The driver will be modified (in the next commits) to be able to specify
>> individual power domain ID for each IP. Update the documentation to cope
>> with this.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> Thanks for your patch!
> 
>> --- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
>> +++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
>> @@ -57,7 +57,7 @@ properties:
>>        can be power-managed through Module Standby should refer to the CPG device
>>        node in their "power-domains" property, as documented by the generic PM
>>        Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
>> -    const: 0
>> +    const: 1
> 
> While the driver will soon support both 0 and 1, we may need to keep 0
> for RZ/V2M for now?  RZ/V2M does not have CPG_BUS_*_MSTOP registers,
> but uses the Internal Power Domain Controller (PMC).

ok

> 
> Please add a link to the power domain numbers in
> <dt-bindings/clock/r9a0*-cpg.h>,
> like is done for #clock-cells.

ok

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
index 80a8c7114c31..d7de3ddbc613 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -57,7 +57,7 @@  properties:
       can be power-managed through Module Standby should refer to the CPG device
       node in their "power-domains" property, as documented by the generic PM
       Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
-    const: 0
+    const: 1
 
   '#reset-cells':
     description:
@@ -84,6 +84,6 @@  examples:
             clocks = <&extal_clk>;
             clock-names = "extal";
             #clock-cells = <2>;
-            #power-domain-cells = <0>;
+            #power-domain-cells = <1>;
             #reset-cells = <1>;
     };