| Message ID | 20240222145838.12916-1-kabel@kernel.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | [1/2] devm-helpers: Add resource managed version of mutex init | expand |
On Thu, Feb 22, 2024 at 3:58 PM Marek Behún <kabel@kernel.org> wrote: > > A few drivers are doing resource-managed mutex initialization by > implementing ad-hoc one-liner mutex dropping functions and using them > with devm_add_action_or_reset(). Help drivers avoid these repeated > one-liners by adding managed version of mutex initialization. > > Use the new function devm_mutex_init() in the following drivers: > drivers/gpio/gpio-pisosr.c > drivers/gpio/gpio-sim.c Yes, please! For GPIO part: Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
On 2/22/24 06:58, Marek Behún wrote: > A few drivers are doing resource-managed mutex initialization by > implementing ad-hoc one-liner mutex dropping functions and using them > with devm_add_action_or_reset(). Help drivers avoid these repeated > one-liners by adding managed version of mutex initialization. > > Use the new function devm_mutex_init() in the following drivers: > drivers/gpio/gpio-pisosr.c > drivers/gpio/gpio-sim.c > drivers/gpu/drm/xe/xe_hwmon.c > drivers/hwmon/nzxt-smart2.c > drivers/leds/leds-is31fl319x.c > drivers/power/supply/mt6370-charger.c > drivers/power/supply/rt9467-charger.c > > Signed-off-by: Marek Behún <kabel@kernel.org> > --- > drivers/gpio/gpio-pisosr.c | 9 ++----- > drivers/gpio/gpio-sim.c | 12 ++-------- > drivers/gpu/drm/xe/xe_hwmon.c | 11 ++------- > drivers/hwmon/nzxt-smart2.c | 9 ++----- > drivers/leds/leds-is31fl319x.c | 9 ++----- > drivers/power/supply/mt6370-charger.c | 11 +-------- > drivers/power/supply/rt9467-charger.c | 34 ++++----------------------- > include/linux/devm-helpers.h | 32 +++++++++++++++++++++++++ > 8 files changed, 47 insertions(+), 80 deletions(-) > > diff --git a/drivers/gpio/gpio-pisosr.c b/drivers/gpio/gpio-pisosr.c > index e3013e778e15..dddbf37e855f 100644 > --- a/drivers/gpio/gpio-pisosr.c > +++ b/drivers/gpio/gpio-pisosr.c > @@ -7,6 +7,7 @@ > #include <linux/bitmap.h> > #include <linux/bitops.h> > #include <linux/delay.h> > +#include <linux/devm-helpers.h> > #include <linux/gpio/consumer.h> > #include <linux/gpio/driver.h> > #include <linux/module.h> > @@ -116,11 +117,6 @@ static const struct gpio_chip template_chip = { > .can_sleep = true, > }; > > -static void pisosr_mutex_destroy(void *lock) > -{ > - mutex_destroy(lock); > -} > - > static int pisosr_gpio_probe(struct spi_device *spi) > { > struct device *dev = &spi->dev; > @@ -147,8 +143,7 @@ static int pisosr_gpio_probe(struct spi_device *spi) > return dev_err_probe(dev, PTR_ERR(gpio->load_gpio), > "Unable to allocate load GPIO\n"); > > - mutex_init(&gpio->lock); > - ret = devm_add_action_or_reset(dev, pisosr_mutex_destroy, &gpio->lock); > + ret = devm_mutex_init(dev, &gpio->lock); > if (ret) > return ret; > > diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c > index c4106e37e6db..fcfcaa4efe70 100644 > --- a/drivers/gpio/gpio-sim.c > +++ b/drivers/gpio/gpio-sim.c > @@ -12,6 +12,7 @@ > #include <linux/completion.h> > #include <linux/configfs.h> > #include <linux/device.h> > +#include <linux/devm-helpers.h> > #include <linux/err.h> > #include <linux/gpio/consumer.h> > #include <linux/gpio/driver.h> > @@ -307,13 +308,6 @@ static ssize_t gpio_sim_sysfs_pull_store(struct device *dev, > return len; > } > > -static void gpio_sim_mutex_destroy(void *data) > -{ > - struct mutex *lock = data; > - > - mutex_destroy(lock); > -} > - > static void gpio_sim_put_device(void *data) > { > struct device *dev = data; > @@ -457,9 +451,7 @@ static int gpio_sim_add_bank(struct fwnode_handle *swnode, struct device *dev) > if (ret) > return ret; > > - mutex_init(&chip->lock); > - ret = devm_add_action_or_reset(dev, gpio_sim_mutex_destroy, > - &chip->lock); > + ret = devm_mutex_init(dev, &chip->lock); > if (ret) > return ret; > > diff --git a/drivers/gpu/drm/xe/xe_hwmon.c b/drivers/gpu/drm/xe/xe_hwmon.c > index 174ed2185481..bb88ae1c196c 100644 > --- a/drivers/gpu/drm/xe/xe_hwmon.c > +++ b/drivers/gpu/drm/xe/xe_hwmon.c > @@ -3,6 +3,7 @@ > * Copyright © 2023 Intel Corporation > */ > > +#include <linux/devm-helpers.h> > #include <linux/hwmon-sysfs.h> > #include <linux/hwmon.h> > #include <linux/types.h> > @@ -729,13 +730,6 @@ xe_hwmon_get_preregistration_info(struct xe_device *xe) > xe_hwmon_energy_get(hwmon, &energy); > } > > -static void xe_hwmon_mutex_destroy(void *arg) > -{ > - struct xe_hwmon *hwmon = arg; > - > - mutex_destroy(&hwmon->hwmon_lock); > -} > - > void xe_hwmon_register(struct xe_device *xe) > { > struct device *dev = xe->drm.dev; > @@ -751,8 +745,7 @@ void xe_hwmon_register(struct xe_device *xe) > > xe->hwmon = hwmon; > > - mutex_init(&hwmon->hwmon_lock); > - if (devm_add_action_or_reset(dev, xe_hwmon_mutex_destroy, hwmon)) > + if (devm_mutex_init(dev, &hwmon->hwmon_lock)) > return; > > /* primary GT to access device level properties */ > diff --git a/drivers/hwmon/nzxt-smart2.c b/drivers/hwmon/nzxt-smart2.c > index 7aa586eb74be..00bc89607673 100644 > --- a/drivers/hwmon/nzxt-smart2.c > +++ b/drivers/hwmon/nzxt-smart2.c > @@ -5,6 +5,7 @@ > * Copyright (c) 2021 Aleksandr Mezin > */ > > +#include <linux/devm-helpers.h> > #include <linux/hid.h> > #include <linux/hwmon.h> > #include <linux/math.h> > @@ -721,11 +722,6 @@ static int __maybe_unused nzxt_smart2_hid_reset_resume(struct hid_device *hdev) > return init_device(drvdata, drvdata->update_interval); > } > > -static void mutex_fini(void *lock) > -{ > - mutex_destroy(lock); > -} > - > static int nzxt_smart2_hid_probe(struct hid_device *hdev, > const struct hid_device_id *id) > { > @@ -741,8 +737,7 @@ static int nzxt_smart2_hid_probe(struct hid_device *hdev, > > init_waitqueue_head(&drvdata->wq); > > - mutex_init(&drvdata->mutex); > - ret = devm_add_action_or_reset(&hdev->dev, mutex_fini, &drvdata->mutex); > + ret = devm_mutex_init(&hdev->dev, &drvdata->mutex); > if (ret) > return ret; > > diff --git a/drivers/leds/leds-is31fl319x.c b/drivers/leds/leds-is31fl319x.c > index 66c65741202e..e9d7cf6a386c 100644 > --- a/drivers/leds/leds-is31fl319x.c > +++ b/drivers/leds/leds-is31fl319x.c > @@ -8,6 +8,7 @@ > * effect LEDs. > */ > > +#include <linux/devm-helpers.h> > #include <linux/err.h> > #include <linux/i2c.h> > #include <linux/leds.h> > @@ -495,11 +496,6 @@ static inline int is31fl3196_db_to_gain(u32 dezibel) > return dezibel / IS31FL3196_AUDIO_GAIN_DB_STEP; > } > > -static void is31f1319x_mutex_destroy(void *lock) > -{ > - mutex_destroy(lock); > -} > - > static int is31fl319x_probe(struct i2c_client *client) > { > struct is31fl319x_chip *is31; > @@ -515,8 +511,7 @@ static int is31fl319x_probe(struct i2c_client *client) > if (!is31) > return -ENOMEM; > > - mutex_init(&is31->lock); > - err = devm_add_action_or_reset(dev, is31f1319x_mutex_destroy, &is31->lock); > + err = devm_mutex_init(dev, &is31->lock); > if (err) > return err; > > diff --git a/drivers/power/supply/mt6370-charger.c b/drivers/power/supply/mt6370-charger.c > index e24fce087d80..fa0517d0352d 100644 > --- a/drivers/power/supply/mt6370-charger.c > +++ b/drivers/power/supply/mt6370-charger.c > @@ -766,13 +766,6 @@ static int mt6370_chg_init_psy(struct mt6370_priv *priv) > return PTR_ERR_OR_ZERO(priv->psy); > } > > -static void mt6370_chg_destroy_attach_lock(void *data) > -{ > - struct mutex *attach_lock = data; > - > - mutex_destroy(attach_lock); > -} > - > static void mt6370_chg_destroy_wq(void *data) > { > struct workqueue_struct *wq = data; > @@ -900,9 +893,7 @@ static int mt6370_chg_probe(struct platform_device *pdev) > if (ret) > return dev_err_probe(dev, ret, "Failed to init psy\n"); > > - mutex_init(&priv->attach_lock); > - ret = devm_add_action_or_reset(dev, mt6370_chg_destroy_attach_lock, > - &priv->attach_lock); > + ret = devm_mutex_init(dev, &priv->attach_lock); > if (ret) > return dev_err_probe(dev, ret, "Failed to init attach lock\n"); > > diff --git a/drivers/power/supply/rt9467-charger.c b/drivers/power/supply/rt9467-charger.c > index fdfdc83ab045..84f07c22077f 100644 > --- a/drivers/power/supply/rt9467-charger.c > +++ b/drivers/power/supply/rt9467-charger.c > @@ -10,6 +10,7 @@ > #include <linux/bitfield.h> > #include <linux/completion.h> > #include <linux/delay.h> > +#include <linux/devm-helpers.h> > #include <linux/gpio/consumer.h> > #include <linux/i2c.h> > #include <linux/interrupt.h> > @@ -1149,27 +1150,6 @@ static int rt9467_reset_chip(struct rt9467_chg_data *data) > return regmap_field_write(data->rm_field[F_RST], 1); > } > > -static void rt9467_chg_destroy_adc_lock(void *data) > -{ > - struct mutex *adc_lock = data; > - > - mutex_destroy(adc_lock); > -} > - > -static void rt9467_chg_destroy_attach_lock(void *data) > -{ > - struct mutex *attach_lock = data; > - > - mutex_destroy(attach_lock); > -} > - > -static void rt9467_chg_destroy_ichg_ieoc_lock(void *data) > -{ > - struct mutex *ichg_ieoc_lock = data; > - > - mutex_destroy(ichg_ieoc_lock); > -} > - > static void rt9467_chg_complete_aicl_done(void *data) > { > struct completion *aicl_done = data; > @@ -1222,21 +1202,15 @@ static int rt9467_charger_probe(struct i2c_client *i2c) > if (ret) > return dev_err_probe(dev, ret, "Failed to add irq chip\n"); > > - mutex_init(&data->adc_lock); > - ret = devm_add_action_or_reset(dev, rt9467_chg_destroy_adc_lock, > - &data->adc_lock); > + ret = devm_mutex_init(dev, &data->adc_lock); > if (ret) > return dev_err_probe(dev, ret, "Failed to init ADC lock\n"); > > - mutex_init(&data->attach_lock); > - ret = devm_add_action_or_reset(dev, rt9467_chg_destroy_attach_lock, > - &data->attach_lock); > + ret = devm_mutex_init(dev, &data->attach_lock); > if (ret) > return dev_err_probe(dev, ret, "Failed to init attach lock\n"); > > - mutex_init(&data->ichg_ieoc_lock); > - ret = devm_add_action_or_reset(dev, rt9467_chg_destroy_ichg_ieoc_lock, > - &data->ichg_ieoc_lock); > + ret = devm_mutex_init(dev, &data->ichg_ieoc_lock); > if (ret) > return dev_err_probe(dev, ret, "Failed to init ICHG/IEOC lock\n"); > > diff --git a/include/linux/devm-helpers.h b/include/linux/devm-helpers.h > index 74891802200d..70640fb96117 100644 > --- a/include/linux/devm-helpers.h > +++ b/include/linux/devm-helpers.h > @@ -24,6 +24,8 @@ > */ > > #include <linux/device.h> > +#include <linux/kconfig.h> > +#include <linux/mutex.h> > #include <linux/workqueue.h> > > static inline void devm_delayed_work_drop(void *res) > @@ -76,4 +78,34 @@ static inline int devm_work_autocancel(struct device *dev, > return devm_add_action(dev, devm_work_drop, w); > } > > +static inline void devm_mutex_drop(void *res) > +{ > + mutex_destroy(res); > +} > + > +/** > + * devm_mutex_init - Resource managed mutex initialization > + * @dev: Device which lifetime mutex is bound to > + * @lock: Mutex to be initialized (and automatically destroyed) > + * > + * Initialize mutex which is automatically destroyed when driver is detached. > + * A few drivers initialize mutexes which they want destroyed before driver is > + * detached, for debugging purposes. > + * devm_mutex_init() can be used to omit the explicit mutex_destroy() call when > + * driver is detached. > + */ > +static inline int devm_mutex_init(struct device *dev, struct mutex *lock) > +{ > + mutex_init(lock); > + > + /* > + * mutex_destroy() is an empty function if CONFIG_DEBUG_MUTEXES is > + * disabled. No need to allocate an action in that case. > + */ > + if (IS_ENABLED(CONFIG_DEBUG_MUTEXES)) > + return devm_add_action_or_reset(dev, devm_mutex_drop, lock); > + else else after return is unnecessary. > + return 0; > +} > + > #endif
Oops, sorry for the noise. Shortened reply below. On 2/22/24 07:24, Guenter Roeck wrote: > On 2/22/24 06:58, Marek Behún wrote: >> A few drivers are doing resource-managed mutex initialization by >> implementing ad-hoc one-liner mutex dropping functions and using them >> with devm_add_action_or_reset(). Help drivers avoid these repeated >> one-liners by adding managed version of mutex initialization. >> [ ... ] >> +static inline int devm_mutex_init(struct device *dev, struct mutex *lock) >> +{ >> + mutex_init(lock); >> + >> + /* >> + * mutex_destroy() is an empty function if CONFIG_DEBUG_MUTEXES is >> + * disabled. No need to allocate an action in that case. >> + */ >> + if (IS_ENABLED(CONFIG_DEBUG_MUTEXES)) >> + return devm_add_action_or_reset(dev, devm_mutex_drop, lock); >> + else > > else after return is unnecessary. > >> + return 0; >> +} >> + >> #endif > >
On 22/02/2024 14:58, Marek Behún wrote: > A few drivers are doing resource-managed mutex initialization by > implementing ad-hoc one-liner mutex dropping functions and using them > with devm_add_action_or_reset(). Help drivers avoid these repeated > one-liners by adding managed version of mutex initialization. > > Use the new function devm_mutex_init() in the following drivers: > drivers/gpio/gpio-pisosr.c > drivers/gpio/gpio-sim.c > drivers/gpu/drm/xe/xe_hwmon.c > drivers/hwmon/nzxt-smart2.c > drivers/leds/leds-is31fl319x.c > drivers/power/supply/mt6370-charger.c > drivers/power/supply/rt9467-charger.c > > Signed-off-by: Marek Behún <kabel@kernel.org> > --- > drivers/gpio/gpio-pisosr.c | 9 ++----- > drivers/gpio/gpio-sim.c | 12 ++-------- > drivers/gpu/drm/xe/xe_hwmon.c | 11 ++------- > drivers/hwmon/nzxt-smart2.c | 9 ++----- > drivers/leds/leds-is31fl319x.c | 9 ++----- > drivers/power/supply/mt6370-charger.c | 11 +-------- > drivers/power/supply/rt9467-charger.c | 34 ++++----------------------- > include/linux/devm-helpers.h | 32 +++++++++++++++++++++++++ > 8 files changed, 47 insertions(+), 80 deletions(-) > > diff --git a/drivers/gpio/gpio-pisosr.c b/drivers/gpio/gpio-pisosr.c > index e3013e778e15..dddbf37e855f 100644 > --- a/drivers/gpio/gpio-pisosr.c > +++ b/drivers/gpio/gpio-pisosr.c > @@ -7,6 +7,7 @@ > #include <linux/bitmap.h> > #include <linux/bitops.h> > #include <linux/delay.h> > +#include <linux/devm-helpers.h> > #include <linux/gpio/consumer.h> > #include <linux/gpio/driver.h> > #include <linux/module.h> > @@ -116,11 +117,6 @@ static const struct gpio_chip template_chip = { > .can_sleep = true, > }; > > -static void pisosr_mutex_destroy(void *lock) > -{ > - mutex_destroy(lock); > -} > - > static int pisosr_gpio_probe(struct spi_device *spi) > { > struct device *dev = &spi->dev; > @@ -147,8 +143,7 @@ static int pisosr_gpio_probe(struct spi_device *spi) > return dev_err_probe(dev, PTR_ERR(gpio->load_gpio), > "Unable to allocate load GPIO\n"); > > - mutex_init(&gpio->lock); > - ret = devm_add_action_or_reset(dev, pisosr_mutex_destroy, &gpio->lock); > + ret = devm_mutex_init(dev, &gpio->lock); > if (ret) > return ret; > > diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c > index c4106e37e6db..fcfcaa4efe70 100644 > --- a/drivers/gpio/gpio-sim.c > +++ b/drivers/gpio/gpio-sim.c > @@ -12,6 +12,7 @@ > #include <linux/completion.h> > #include <linux/configfs.h> > #include <linux/device.h> > +#include <linux/devm-helpers.h> > #include <linux/err.h> > #include <linux/gpio/consumer.h> > #include <linux/gpio/driver.h> > @@ -307,13 +308,6 @@ static ssize_t gpio_sim_sysfs_pull_store(struct device *dev, > return len; > } > > -static void gpio_sim_mutex_destroy(void *data) > -{ > - struct mutex *lock = data; > - > - mutex_destroy(lock); > -} > - > static void gpio_sim_put_device(void *data) > { > struct device *dev = data; > @@ -457,9 +451,7 @@ static int gpio_sim_add_bank(struct fwnode_handle *swnode, struct device *dev) > if (ret) > return ret; > > - mutex_init(&chip->lock); > - ret = devm_add_action_or_reset(dev, gpio_sim_mutex_destroy, > - &chip->lock); > + ret = devm_mutex_init(dev, &chip->lock); > if (ret) > return ret; > > diff --git a/drivers/gpu/drm/xe/xe_hwmon.c b/drivers/gpu/drm/xe/xe_hwmon.c > index 174ed2185481..bb88ae1c196c 100644 > --- a/drivers/gpu/drm/xe/xe_hwmon.c > +++ b/drivers/gpu/drm/xe/xe_hwmon.c > @@ -3,6 +3,7 @@ > * Copyright © 2023 Intel Corporation > */ > > +#include <linux/devm-helpers.h> > #include <linux/hwmon-sysfs.h> > #include <linux/hwmon.h> > #include <linux/types.h> > @@ -729,13 +730,6 @@ xe_hwmon_get_preregistration_info(struct xe_device *xe) > xe_hwmon_energy_get(hwmon, &energy); > } > > -static void xe_hwmon_mutex_destroy(void *arg) > -{ > - struct xe_hwmon *hwmon = arg; > - > - mutex_destroy(&hwmon->hwmon_lock); > -} > - > void xe_hwmon_register(struct xe_device *xe) > { > struct device *dev = xe->drm.dev; > @@ -751,8 +745,7 @@ void xe_hwmon_register(struct xe_device *xe) > > xe->hwmon = hwmon; > > - mutex_init(&hwmon->hwmon_lock); > - if (devm_add_action_or_reset(dev, xe_hwmon_mutex_destroy, hwmon)) > + if (devm_mutex_init(dev, &hwmon->hwmon_lock)) > return; > > /* primary GT to access device level properties */ > diff --git a/drivers/hwmon/nzxt-smart2.c b/drivers/hwmon/nzxt-smart2.c > index 7aa586eb74be..00bc89607673 100644 > --- a/drivers/hwmon/nzxt-smart2.c > +++ b/drivers/hwmon/nzxt-smart2.c > @@ -5,6 +5,7 @@ > * Copyright (c) 2021 Aleksandr Mezin > */ > > +#include <linux/devm-helpers.h> > #include <linux/hid.h> > #include <linux/hwmon.h> > #include <linux/math.h> > @@ -721,11 +722,6 @@ static int __maybe_unused nzxt_smart2_hid_reset_resume(struct hid_device *hdev) > return init_device(drvdata, drvdata->update_interval); > } > > -static void mutex_fini(void *lock) > -{ > - mutex_destroy(lock); > -} > - > static int nzxt_smart2_hid_probe(struct hid_device *hdev, > const struct hid_device_id *id) > { > @@ -741,8 +737,7 @@ static int nzxt_smart2_hid_probe(struct hid_device *hdev, > > init_waitqueue_head(&drvdata->wq); > > - mutex_init(&drvdata->mutex); > - ret = devm_add_action_or_reset(&hdev->dev, mutex_fini, &drvdata->mutex); > + ret = devm_mutex_init(&hdev->dev, &drvdata->mutex); > if (ret) > return ret; > > diff --git a/drivers/leds/leds-is31fl319x.c b/drivers/leds/leds-is31fl319x.c > index 66c65741202e..e9d7cf6a386c 100644 > --- a/drivers/leds/leds-is31fl319x.c > +++ b/drivers/leds/leds-is31fl319x.c > @@ -8,6 +8,7 @@ > * effect LEDs. > */ > > +#include <linux/devm-helpers.h> > #include <linux/err.h> > #include <linux/i2c.h> > #include <linux/leds.h> > @@ -495,11 +496,6 @@ static inline int is31fl3196_db_to_gain(u32 dezibel) > return dezibel / IS31FL3196_AUDIO_GAIN_DB_STEP; > } > > -static void is31f1319x_mutex_destroy(void *lock) > -{ > - mutex_destroy(lock); > -} > - > static int is31fl319x_probe(struct i2c_client *client) > { > struct is31fl319x_chip *is31; > @@ -515,8 +511,7 @@ static int is31fl319x_probe(struct i2c_client *client) > if (!is31) > return -ENOMEM; > > - mutex_init(&is31->lock); > - err = devm_add_action_or_reset(dev, is31f1319x_mutex_destroy, &is31->lock); > + err = devm_mutex_init(dev, &is31->lock); > if (err) > return err; > > diff --git a/drivers/power/supply/mt6370-charger.c b/drivers/power/supply/mt6370-charger.c > index e24fce087d80..fa0517d0352d 100644 > --- a/drivers/power/supply/mt6370-charger.c > +++ b/drivers/power/supply/mt6370-charger.c > @@ -766,13 +766,6 @@ static int mt6370_chg_init_psy(struct mt6370_priv *priv) > return PTR_ERR_OR_ZERO(priv->psy); > } > > -static void mt6370_chg_destroy_attach_lock(void *data) > -{ > - struct mutex *attach_lock = data; > - > - mutex_destroy(attach_lock); > -} > - > static void mt6370_chg_destroy_wq(void *data) > { > struct workqueue_struct *wq = data; > @@ -900,9 +893,7 @@ static int mt6370_chg_probe(struct platform_device *pdev) > if (ret) > return dev_err_probe(dev, ret, "Failed to init psy\n"); > > - mutex_init(&priv->attach_lock); > - ret = devm_add_action_or_reset(dev, mt6370_chg_destroy_attach_lock, > - &priv->attach_lock); > + ret = devm_mutex_init(dev, &priv->attach_lock); > if (ret) > return dev_err_probe(dev, ret, "Failed to init attach lock\n"); > > diff --git a/drivers/power/supply/rt9467-charger.c b/drivers/power/supply/rt9467-charger.c > index fdfdc83ab045..84f07c22077f 100644 > --- a/drivers/power/supply/rt9467-charger.c > +++ b/drivers/power/supply/rt9467-charger.c > @@ -10,6 +10,7 @@ > #include <linux/bitfield.h> > #include <linux/completion.h> > #include <linux/delay.h> > +#include <linux/devm-helpers.h> > #include <linux/gpio/consumer.h> > #include <linux/i2c.h> > #include <linux/interrupt.h> > @@ -1149,27 +1150,6 @@ static int rt9467_reset_chip(struct rt9467_chg_data *data) > return regmap_field_write(data->rm_field[F_RST], 1); > } > > -static void rt9467_chg_destroy_adc_lock(void *data) > -{ > - struct mutex *adc_lock = data; > - > - mutex_destroy(adc_lock); > -} > - > -static void rt9467_chg_destroy_attach_lock(void *data) > -{ > - struct mutex *attach_lock = data; > - > - mutex_destroy(attach_lock); > -} > - > -static void rt9467_chg_destroy_ichg_ieoc_lock(void *data) > -{ > - struct mutex *ichg_ieoc_lock = data; > - > - mutex_destroy(ichg_ieoc_lock); > -} > - > static void rt9467_chg_complete_aicl_done(void *data) > { > struct completion *aicl_done = data; > @@ -1222,21 +1202,15 @@ static int rt9467_charger_probe(struct i2c_client *i2c) > if (ret) > return dev_err_probe(dev, ret, "Failed to add irq chip\n"); > > - mutex_init(&data->adc_lock); > - ret = devm_add_action_or_reset(dev, rt9467_chg_destroy_adc_lock, > - &data->adc_lock); > + ret = devm_mutex_init(dev, &data->adc_lock); > if (ret) > return dev_err_probe(dev, ret, "Failed to init ADC lock\n"); > > - mutex_init(&data->attach_lock); > - ret = devm_add_action_or_reset(dev, rt9467_chg_destroy_attach_lock, > - &data->attach_lock); > + ret = devm_mutex_init(dev, &data->attach_lock); > if (ret) > return dev_err_probe(dev, ret, "Failed to init attach lock\n"); > > - mutex_init(&data->ichg_ieoc_lock); > - ret = devm_add_action_or_reset(dev, rt9467_chg_destroy_ichg_ieoc_lock, > - &data->ichg_ieoc_lock); > + ret = devm_mutex_init(dev, &data->ichg_ieoc_lock); > if (ret) > return dev_err_probe(dev, ret, "Failed to init ICHG/IEOC lock\n"); > > diff --git a/include/linux/devm-helpers.h b/include/linux/devm-helpers.h > index 74891802200d..70640fb96117 100644 > --- a/include/linux/devm-helpers.h > +++ b/include/linux/devm-helpers.h > @@ -24,6 +24,8 @@ > */ > > #include <linux/device.h> > +#include <linux/kconfig.h> > +#include <linux/mutex.h> > #include <linux/workqueue.h> > > static inline void devm_delayed_work_drop(void *res) > @@ -76,4 +78,34 @@ static inline int devm_work_autocancel(struct device *dev, > return devm_add_action(dev, devm_work_drop, w); > } > > +static inline void devm_mutex_drop(void *res) > +{ > + mutex_destroy(res); > +} > + > +/** > + * devm_mutex_init - Resource managed mutex initialization > + * @dev: Device which lifetime mutex is bound to > + * @lock: Mutex to be initialized (and automatically destroyed) > + * > + * Initialize mutex which is automatically destroyed when driver is detached. > + * A few drivers initialize mutexes which they want destroyed before driver is > + * detached, for debugging purposes. > + * devm_mutex_init() can be used to omit the explicit mutex_destroy() call when > + * driver is detached. > + */ > +static inline int devm_mutex_init(struct device *dev, struct mutex *lock) > +{ > + mutex_init(lock); Do you know if this this needs __always_inline? The static lockdep key in mutex_init() should be different for each caller class. See c21f11d182c2 ("drm: fix drmm_mutex_init()"). > + > + /* > + * mutex_destroy() is an empty function if CONFIG_DEBUG_MUTEXES is > + * disabled. No need to allocate an action in that case. > + */ > + if (IS_ENABLED(CONFIG_DEBUG_MUTEXES)) > + return devm_add_action_or_reset(dev, devm_mutex_drop, lock); > + else > + return 0; > +} > + > #endif
Hi, On 2/22/24 17:44, Matthew Auld wrote: > On 22/02/2024 14:58, Marek Behún wrote: >> A few drivers are doing resource-managed mutex initialization by >> implementing ad-hoc one-liner mutex dropping functions and using them >> with devm_add_action_or_reset(). Help drivers avoid these repeated >> one-liners by adding managed version of mutex initialization. <snip> >> index 74891802200d..70640fb96117 100644 >> --- a/include/linux/devm-helpers.h >> +++ b/include/linux/devm-helpers.h >> @@ -24,6 +24,8 @@ >> */ >> #include <linux/device.h> >> +#include <linux/kconfig.h> >> +#include <linux/mutex.h> >> #include <linux/workqueue.h> >> static inline void devm_delayed_work_drop(void *res) >> @@ -76,4 +78,34 @@ static inline int devm_work_autocancel(struct device *dev, >> return devm_add_action(dev, devm_work_drop, w); >> } >> +static inline void devm_mutex_drop(void *res) >> +{ >> + mutex_destroy(res); >> +} >> + >> +/** >> + * devm_mutex_init - Resource managed mutex initialization >> + * @dev: Device which lifetime mutex is bound to >> + * @lock: Mutex to be initialized (and automatically destroyed) >> + * >> + * Initialize mutex which is automatically destroyed when driver is detached. >> + * A few drivers initialize mutexes which they want destroyed before driver is >> + * detached, for debugging purposes. >> + * devm_mutex_init() can be used to omit the explicit mutex_destroy() call when >> + * driver is detached. >> + */ >> +static inline int devm_mutex_init(struct device *dev, struct mutex *lock) >> +{ >> + mutex_init(lock); > > Do you know if this this needs __always_inline? The static lockdep key in mutex_init() should be > different for each caller class. See c21f11d182c2 ("drm: fix drmm_mutex_init()"). That is a very good point. I believe that this should mirror mutex_init() and the actual static inline function should be __devm_mutex_init() which takes the key as extra argument (and calls __mutex_init()) and then make devm_mutex_init() itself a macro mirroring the mutex_init() macro. Regards, Hans > >> + >> + /* >> + * mutex_destroy() is an empty function if CONFIG_DEBUG_MUTEXES is >> + * disabled. No need to allocate an action in that case. >> + */ >> + if (IS_ENABLED(CONFIG_DEBUG_MUTEXES)) >> + return devm_add_action_or_reset(dev, devm_mutex_drop, lock); >> + else >> + return 0; >> +} >> + >> #endif >
Thu, Feb 22, 2024 at 03:58:37PM +0100, Marek Behún kirjoitti: > A few drivers are doing resource-managed mutex initialization by > implementing ad-hoc one-liner mutex dropping functions and using them > with devm_add_action_or_reset(). Help drivers avoid these repeated > one-liners by adding managed version of mutex initialization. > > Use the new function devm_mutex_init() in the following drivers: > drivers/gpio/gpio-pisosr.c > drivers/gpio/gpio-sim.c > drivers/gpu/drm/xe/xe_hwmon.c > drivers/hwmon/nzxt-smart2.c > drivers/leds/leds-is31fl319x.c > drivers/power/supply/mt6370-charger.c > drivers/power/supply/rt9467-charger.c Pardon me, but why? https://lore.kernel.org/linux-leds/20231214173614.2820929-1-gnstark@salutedevices.com/ Can you cooperate, folks, instead of doing something independently? > --- a/include/linux/devm-helpers.h > +++ b/include/linux/devm-helpers.h > @@ -24,6 +24,8 @@ > */ > > #include <linux/device.h> > +#include <linux/kconfig.h> > +#include <linux/mutex.h> > #include <linux/workqueue.h> > > static inline void devm_delayed_work_drop(void *res) > @@ -76,4 +78,34 @@ static inline int devm_work_autocancel(struct device *dev, > return devm_add_action(dev, devm_work_drop, w); > } > > +static inline void devm_mutex_drop(void *res) > +{ > + mutex_destroy(res); > +} > + > +/** > + * devm_mutex_init - Resource managed mutex initialization > + * @dev: Device which lifetime mutex is bound to > + * @lock: Mutex to be initialized (and automatically destroyed) > + * > + * Initialize mutex which is automatically destroyed when driver is detached. > + * A few drivers initialize mutexes which they want destroyed before driver is > + * detached, for debugging purposes. > + * devm_mutex_init() can be used to omit the explicit mutex_destroy() call when > + * driver is detached. > + */ > +static inline int devm_mutex_init(struct device *dev, struct mutex *lock) > +{ > + mutex_init(lock); > + > + /* > + * mutex_destroy() is an empty function if CONFIG_DEBUG_MUTEXES is > + * disabled. No need to allocate an action in that case. > + */ > + if (IS_ENABLED(CONFIG_DEBUG_MUTEXES)) > + return devm_add_action_or_reset(dev, devm_mutex_drop, lock); > + else > + return 0; > +} Cc: George Stark <gnstark@salutedevices.com>
On Thu, 22 Feb 2024 23:42:11 +0200 andy.shevchenko@gmail.com wrote: > Thu, Feb 22, 2024 at 03:58:37PM +0100, Marek Behún kirjoitti: > > A few drivers are doing resource-managed mutex initialization by > > implementing ad-hoc one-liner mutex dropping functions and using them > > with devm_add_action_or_reset(). Help drivers avoid these repeated > > one-liners by adding managed version of mutex initialization. > > > > Use the new function devm_mutex_init() in the following drivers: > > drivers/gpio/gpio-pisosr.c > > drivers/gpio/gpio-sim.c > > drivers/gpu/drm/xe/xe_hwmon.c > > drivers/hwmon/nzxt-smart2.c > > drivers/leds/leds-is31fl319x.c > > drivers/power/supply/mt6370-charger.c > > drivers/power/supply/rt9467-charger.c > > Pardon me, but why? > > https://lore.kernel.org/linux-leds/20231214173614.2820929-1-gnstark@salutedevices.com/ > > Can you cooperate, folks, instead of doing something independently? Thanks Andy for pointing to George's patch series. I can drop the mutex_init() part and add just the debugfs part. Marek
On 2/23/24 15:26, Marek Behún wrote: > On Thu, 22 Feb 2024 23:42:11 +0200 > andy.shevchenko@gmail.com wrote: > >> Thu, Feb 22, 2024 at 03:58:37PM +0100, Marek Behún kirjoitti: >>> A few drivers are doing resource-managed mutex initialization by >>> implementing ad-hoc one-liner mutex dropping functions and using them >>> with devm_add_action_or_reset(). Help drivers avoid these repeated >>> one-liners by adding managed version of mutex initialization. >>> >>> Use the new function devm_mutex_init() in the following drivers: >>> drivers/gpio/gpio-pisosr.c >>> drivers/gpio/gpio-sim.c >>> drivers/gpu/drm/xe/xe_hwmon.c >>> drivers/hwmon/nzxt-smart2.c >>> drivers/leds/leds-is31fl319x.c >>> drivers/power/supply/mt6370-charger.c >>> drivers/power/supply/rt9467-charger.c >> >> Pardon me, but why? >> >> https://lore.kernel.org/linux-leds/20231214173614.2820929-1-gnstark@salutedevices.com/ >> >> Can you cooperate, folks, instead of doing something independently? Hello Andy Thanks for pointing to my patch series > > Thanks Andy for pointing to George's patch series. > > I can drop the mutex_init() part and add just the debugfs part. Hello Marek I started to propose devm_mutex_init in December 2023. We tried to put it in devm-helpers.h firstly then we came to conclusion that linux/mutex.h would be a better place for it. Now I'm waiting for this series [1] to be merged because my patch depends on it. I'll let you know when I have an update. [1] https://lore.kernel.org/lkml/20240222150540.79981-2-longman@redhat.com/T/ > > Marek
diff --git a/drivers/gpio/gpio-pisosr.c b/drivers/gpio/gpio-pisosr.c index e3013e778e15..dddbf37e855f 100644 --- a/drivers/gpio/gpio-pisosr.c +++ b/drivers/gpio/gpio-pisosr.c @@ -7,6 +7,7 @@ #include <linux/bitmap.h> #include <linux/bitops.h> #include <linux/delay.h> +#include <linux/devm-helpers.h> #include <linux/gpio/consumer.h> #include <linux/gpio/driver.h> #include <linux/module.h> @@ -116,11 +117,6 @@ static const struct gpio_chip template_chip = { .can_sleep = true, }; -static void pisosr_mutex_destroy(void *lock) -{ - mutex_destroy(lock); -} - static int pisosr_gpio_probe(struct spi_device *spi) { struct device *dev = &spi->dev; @@ -147,8 +143,7 @@ static int pisosr_gpio_probe(struct spi_device *spi) return dev_err_probe(dev, PTR_ERR(gpio->load_gpio), "Unable to allocate load GPIO\n"); - mutex_init(&gpio->lock); - ret = devm_add_action_or_reset(dev, pisosr_mutex_destroy, &gpio->lock); + ret = devm_mutex_init(dev, &gpio->lock); if (ret) return ret; diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c index c4106e37e6db..fcfcaa4efe70 100644 --- a/drivers/gpio/gpio-sim.c +++ b/drivers/gpio/gpio-sim.c @@ -12,6 +12,7 @@ #include <linux/completion.h> #include <linux/configfs.h> #include <linux/device.h> +#include <linux/devm-helpers.h> #include <linux/err.h> #include <linux/gpio/consumer.h> #include <linux/gpio/driver.h> @@ -307,13 +308,6 @@ static ssize_t gpio_sim_sysfs_pull_store(struct device *dev, return len; } -static void gpio_sim_mutex_destroy(void *data) -{ - struct mutex *lock = data; - - mutex_destroy(lock); -} - static void gpio_sim_put_device(void *data) { struct device *dev = data; @@ -457,9 +451,7 @@ static int gpio_sim_add_bank(struct fwnode_handle *swnode, struct device *dev) if (ret) return ret; - mutex_init(&chip->lock); - ret = devm_add_action_or_reset(dev, gpio_sim_mutex_destroy, - &chip->lock); + ret = devm_mutex_init(dev, &chip->lock); if (ret) return ret; diff --git a/drivers/gpu/drm/xe/xe_hwmon.c b/drivers/gpu/drm/xe/xe_hwmon.c index 174ed2185481..bb88ae1c196c 100644 --- a/drivers/gpu/drm/xe/xe_hwmon.c +++ b/drivers/gpu/drm/xe/xe_hwmon.c @@ -3,6 +3,7 @@ * Copyright © 2023 Intel Corporation */ +#include <linux/devm-helpers.h> #include <linux/hwmon-sysfs.h> #include <linux/hwmon.h> #include <linux/types.h> @@ -729,13 +730,6 @@ xe_hwmon_get_preregistration_info(struct xe_device *xe) xe_hwmon_energy_get(hwmon, &energy); } -static void xe_hwmon_mutex_destroy(void *arg) -{ - struct xe_hwmon *hwmon = arg; - - mutex_destroy(&hwmon->hwmon_lock); -} - void xe_hwmon_register(struct xe_device *xe) { struct device *dev = xe->drm.dev; @@ -751,8 +745,7 @@ void xe_hwmon_register(struct xe_device *xe) xe->hwmon = hwmon; - mutex_init(&hwmon->hwmon_lock); - if (devm_add_action_or_reset(dev, xe_hwmon_mutex_destroy, hwmon)) + if (devm_mutex_init(dev, &hwmon->hwmon_lock)) return; /* primary GT to access device level properties */ diff --git a/drivers/hwmon/nzxt-smart2.c b/drivers/hwmon/nzxt-smart2.c index 7aa586eb74be..00bc89607673 100644 --- a/drivers/hwmon/nzxt-smart2.c +++ b/drivers/hwmon/nzxt-smart2.c @@ -5,6 +5,7 @@ * Copyright (c) 2021 Aleksandr Mezin */ +#include <linux/devm-helpers.h> #include <linux/hid.h> #include <linux/hwmon.h> #include <linux/math.h> @@ -721,11 +722,6 @@ static int __maybe_unused nzxt_smart2_hid_reset_resume(struct hid_device *hdev) return init_device(drvdata, drvdata->update_interval); } -static void mutex_fini(void *lock) -{ - mutex_destroy(lock); -} - static int nzxt_smart2_hid_probe(struct hid_device *hdev, const struct hid_device_id *id) { @@ -741,8 +737,7 @@ static int nzxt_smart2_hid_probe(struct hid_device *hdev, init_waitqueue_head(&drvdata->wq); - mutex_init(&drvdata->mutex); - ret = devm_add_action_or_reset(&hdev->dev, mutex_fini, &drvdata->mutex); + ret = devm_mutex_init(&hdev->dev, &drvdata->mutex); if (ret) return ret; diff --git a/drivers/leds/leds-is31fl319x.c b/drivers/leds/leds-is31fl319x.c index 66c65741202e..e9d7cf6a386c 100644 --- a/drivers/leds/leds-is31fl319x.c +++ b/drivers/leds/leds-is31fl319x.c @@ -8,6 +8,7 @@ * effect LEDs. */ +#include <linux/devm-helpers.h> #include <linux/err.h> #include <linux/i2c.h> #include <linux/leds.h> @@ -495,11 +496,6 @@ static inline int is31fl3196_db_to_gain(u32 dezibel) return dezibel / IS31FL3196_AUDIO_GAIN_DB_STEP; } -static void is31f1319x_mutex_destroy(void *lock) -{ - mutex_destroy(lock); -} - static int is31fl319x_probe(struct i2c_client *client) { struct is31fl319x_chip *is31; @@ -515,8 +511,7 @@ static int is31fl319x_probe(struct i2c_client *client) if (!is31) return -ENOMEM; - mutex_init(&is31->lock); - err = devm_add_action_or_reset(dev, is31f1319x_mutex_destroy, &is31->lock); + err = devm_mutex_init(dev, &is31->lock); if (err) return err; diff --git a/drivers/power/supply/mt6370-charger.c b/drivers/power/supply/mt6370-charger.c index e24fce087d80..fa0517d0352d 100644 --- a/drivers/power/supply/mt6370-charger.c +++ b/drivers/power/supply/mt6370-charger.c @@ -766,13 +766,6 @@ static int mt6370_chg_init_psy(struct mt6370_priv *priv) return PTR_ERR_OR_ZERO(priv->psy); } -static void mt6370_chg_destroy_attach_lock(void *data) -{ - struct mutex *attach_lock = data; - - mutex_destroy(attach_lock); -} - static void mt6370_chg_destroy_wq(void *data) { struct workqueue_struct *wq = data; @@ -900,9 +893,7 @@ static int mt6370_chg_probe(struct platform_device *pdev) if (ret) return dev_err_probe(dev, ret, "Failed to init psy\n"); - mutex_init(&priv->attach_lock); - ret = devm_add_action_or_reset(dev, mt6370_chg_destroy_attach_lock, - &priv->attach_lock); + ret = devm_mutex_init(dev, &priv->attach_lock); if (ret) return dev_err_probe(dev, ret, "Failed to init attach lock\n"); diff --git a/drivers/power/supply/rt9467-charger.c b/drivers/power/supply/rt9467-charger.c index fdfdc83ab045..84f07c22077f 100644 --- a/drivers/power/supply/rt9467-charger.c +++ b/drivers/power/supply/rt9467-charger.c @@ -10,6 +10,7 @@ #include <linux/bitfield.h> #include <linux/completion.h> #include <linux/delay.h> +#include <linux/devm-helpers.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/interrupt.h> @@ -1149,27 +1150,6 @@ static int rt9467_reset_chip(struct rt9467_chg_data *data) return regmap_field_write(data->rm_field[F_RST], 1); } -static void rt9467_chg_destroy_adc_lock(void *data) -{ - struct mutex *adc_lock = data; - - mutex_destroy(adc_lock); -} - -static void rt9467_chg_destroy_attach_lock(void *data) -{ - struct mutex *attach_lock = data; - - mutex_destroy(attach_lock); -} - -static void rt9467_chg_destroy_ichg_ieoc_lock(void *data) -{ - struct mutex *ichg_ieoc_lock = data; - - mutex_destroy(ichg_ieoc_lock); -} - static void rt9467_chg_complete_aicl_done(void *data) { struct completion *aicl_done = data; @@ -1222,21 +1202,15 @@ static int rt9467_charger_probe(struct i2c_client *i2c) if (ret) return dev_err_probe(dev, ret, "Failed to add irq chip\n"); - mutex_init(&data->adc_lock); - ret = devm_add_action_or_reset(dev, rt9467_chg_destroy_adc_lock, - &data->adc_lock); + ret = devm_mutex_init(dev, &data->adc_lock); if (ret) return dev_err_probe(dev, ret, "Failed to init ADC lock\n"); - mutex_init(&data->attach_lock); - ret = devm_add_action_or_reset(dev, rt9467_chg_destroy_attach_lock, - &data->attach_lock); + ret = devm_mutex_init(dev, &data->attach_lock); if (ret) return dev_err_probe(dev, ret, "Failed to init attach lock\n"); - mutex_init(&data->ichg_ieoc_lock); - ret = devm_add_action_or_reset(dev, rt9467_chg_destroy_ichg_ieoc_lock, - &data->ichg_ieoc_lock); + ret = devm_mutex_init(dev, &data->ichg_ieoc_lock); if (ret) return dev_err_probe(dev, ret, "Failed to init ICHG/IEOC lock\n"); diff --git a/include/linux/devm-helpers.h b/include/linux/devm-helpers.h index 74891802200d..70640fb96117 100644 --- a/include/linux/devm-helpers.h +++ b/include/linux/devm-helpers.h @@ -24,6 +24,8 @@ */ #include <linux/device.h> +#include <linux/kconfig.h> +#include <linux/mutex.h> #include <linux/workqueue.h> static inline void devm_delayed_work_drop(void *res) @@ -76,4 +78,34 @@ static inline int devm_work_autocancel(struct device *dev, return devm_add_action(dev, devm_work_drop, w); } +static inline void devm_mutex_drop(void *res) +{ + mutex_destroy(res); +} + +/** + * devm_mutex_init - Resource managed mutex initialization + * @dev: Device which lifetime mutex is bound to + * @lock: Mutex to be initialized (and automatically destroyed) + * + * Initialize mutex which is automatically destroyed when driver is detached. + * A few drivers initialize mutexes which they want destroyed before driver is + * detached, for debugging purposes. + * devm_mutex_init() can be used to omit the explicit mutex_destroy() call when + * driver is detached. + */ +static inline int devm_mutex_init(struct device *dev, struct mutex *lock) +{ + mutex_init(lock); + + /* + * mutex_destroy() is an empty function if CONFIG_DEBUG_MUTEXES is + * disabled. No need to allocate an action in that case. + */ + if (IS_ENABLED(CONFIG_DEBUG_MUTEXES)) + return devm_add_action_or_reset(dev, devm_mutex_drop, lock); + else + return 0; +} + #endif
A few drivers are doing resource-managed mutex initialization by implementing ad-hoc one-liner mutex dropping functions and using them with devm_add_action_or_reset(). Help drivers avoid these repeated one-liners by adding managed version of mutex initialization. Use the new function devm_mutex_init() in the following drivers: drivers/gpio/gpio-pisosr.c drivers/gpio/gpio-sim.c drivers/gpu/drm/xe/xe_hwmon.c drivers/hwmon/nzxt-smart2.c drivers/leds/leds-is31fl319x.c drivers/power/supply/mt6370-charger.c drivers/power/supply/rt9467-charger.c Signed-off-by: Marek Behún <kabel@kernel.org> --- drivers/gpio/gpio-pisosr.c | 9 ++----- drivers/gpio/gpio-sim.c | 12 ++-------- drivers/gpu/drm/xe/xe_hwmon.c | 11 ++------- drivers/hwmon/nzxt-smart2.c | 9 ++----- drivers/leds/leds-is31fl319x.c | 9 ++----- drivers/power/supply/mt6370-charger.c | 11 +-------- drivers/power/supply/rt9467-charger.c | 34 ++++----------------------- include/linux/devm-helpers.h | 32 +++++++++++++++++++++++++ 8 files changed, 47 insertions(+), 80 deletions(-)