@@ -424,6 +424,10 @@ static int rsi_load_radio_caps(struct rsi_common *common)
}
radio_caps->radio_info |= radio_id;
+ if (adapter->device_model == RSI_DEV_9116 &&
+ common->channel_width == BW_20MHZ)
+ radio_caps->radio_cfg_info &= ~0x3;
+
radio_caps->sifs_tx_11n = cpu_to_le16(SIFS_TX_11N_VALUE);
radio_caps->sifs_tx_11b = cpu_to_le16(SIFS_TX_11B_VALUE);
radio_caps->slot_rx_11n = cpu_to_le16(SHORT_SLOT_VALUE);
@@ -439,14 +443,16 @@ static int rsi_load_radio_caps(struct rsi_common *common)
}
for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) {
- radio_caps->qos_params[ii].cont_win_min_q =
- cpu_to_le16(common->edca_params[ii].cw_min);
- radio_caps->qos_params[ii].cont_win_max_q =
- cpu_to_le16(common->edca_params[ii].cw_max);
- radio_caps->qos_params[ii].aifsn_val_q =
- cpu_to_le16((common->edca_params[ii].aifs) << 8);
- radio_caps->qos_params[ii].txop_q =
- cpu_to_le16(common->edca_params[ii].txop);
+ if (common->edca_params[ii].cw_max > 0) {
+ radio_caps->qos_params[ii].cont_win_min_q =
+ cpu_to_le16(common->edca_params[ii].cw_min);
+ radio_caps->qos_params[ii].cont_win_max_q =
+ cpu_to_le16(common->edca_params[ii].cw_max);
+ radio_caps->qos_params[ii].aifsn_val_q =
+ cpu_to_le16(common->edca_params[ii].aifs << 8);
+ radio_caps->qos_params[ii].txop_q =
+ cpu_to_le16(common->edca_params[ii].txop);
+ }
}
radio_caps->qos_params[BROADCAST_HW_Q].txop_q = cpu_to_le16(0xffff);
@@ -1026,6 +1032,11 @@ static int rsi_send_reset_mac(struct rsi_common *common)
mgmt_frame->desc_word[1] = cpu_to_le16(RESET_MAC_REQ);
mgmt_frame->desc_word[4] = cpu_to_le16(RETRY_COUNT << 8);
+#define RSI_9116_DEF_TA_AGGR 3
+ if (common->priv->device_model == RSI_DEV_9116)
+ mgmt_frame->desc_word[3] |=
+ cpu_to_le16(RSI_9116_DEF_TA_AGGR << 8);
+
skb_put(skb, FRAME_DESC_SZ);
return rsi_send_internal_mgmt_frame(common, skb);
@@ -213,7 +213,7 @@ static int rsi_usb_reg_read(struct usb_device *usbdev,
*/
static int rsi_usb_reg_write(struct usb_device *usbdev,
u32 reg,
- u16 value,
+ u32 value,
u16 len)
{
u8 *usb_reg_buf;
@@ -226,17 +226,17 @@ static int rsi_usb_reg_write(struct usb_device *usbdev,
if (!usb_reg_buf)
return status;
- usb_reg_buf[0] = (value & 0x00ff);
- usb_reg_buf[1] = (value & 0xff00) >> 8;
- usb_reg_buf[2] = 0x0;
- usb_reg_buf[3] = 0x0;
+ usb_reg_buf[0] = (cpu_to_le32(value) & 0x00ff);
+ usb_reg_buf[1] = (cpu_to_le32(value) & 0xff00) >> 8;
+ usb_reg_buf[2] = (cpu_to_le32(value) & 0x00ff0000) >> 16;
+ usb_reg_buf[3] = (cpu_to_le32(value) & 0xff000000) >> 24;
status = usb_control_msg(usbdev,
usb_sndctrlpipe(usbdev, 0),
USB_VENDOR_REGISTER_WRITE,
RSI_USB_REQ_OUT,
- ((reg & 0xffff0000) >> 16),
- (reg & 0xffff),
+ ((cpu_to_le32(reg) & 0xffff0000) >> 16),
+ (cpu_to_le32(reg) & 0xffff),
(void *)usb_reg_buf,
len,
USB_CTRL_SET_TIMEOUT);
@@ -263,8 +263,10 @@ static void rsi_rx_done_handler(struct urb *urb)
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)rx_cb->data;
int status = -EINVAL;
- if (urb->status)
- goto out;
+ if (urb->status) {
+ dev_kfree_skb(rx_cb->rx_skb);
+ return;
+ }
if (urb->actual_length <= 0 ||
urb->actual_length > rx_cb->rx_skb->len) {
Below changes are done: * Device 80MHz clock should be disabled for 9116 in 20MHz band. * Default edca parameters should be used initially before connection. * Default TA aggregation is 3 for 9116. * Bootup parameters should be loaded first when channel is changed. * 4 byte register writes are possible for 9116. Signed-off-by: Siva Rebbagondla <siva8118@gmail.com> --- drivers/net/wireless/rsi/rsi_91x_mgmt.c | 27 +++++++++++++++++-------- drivers/net/wireless/rsi/rsi_91x_usb.c | 20 +++++++++--------- 2 files changed, 30 insertions(+), 17 deletions(-)