| Message ID | 20231218174042.794012-16-mike.rudenko@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Omnivision OV4689 refactoring and improvements | expand |
Hi Mikhail, Thank you for the patch. On Mon, Dec 18, 2023 at 08:40:36PM +0300, Mikhail Rudenko wrote: > Pixel array dimensions and default crop size do not belong to the > ov4689_mode structure, since they are mode independent. Make them > defines instead. > > Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> > --- > drivers/media/i2c/ov4689.c | 29 +++++++++++++---------------- > 1 file changed, 13 insertions(+), 16 deletions(-) > > diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c > index b43fb1d7b15f..475508559e3e 100644 > --- a/drivers/media/i2c/ov4689.c > +++ b/drivers/media/i2c/ov4689.c > @@ -70,6 +70,11 @@ > #define OV4689_LANES 4 > #define OV4689_XVCLK_FREQ 24000000 > > +#define OV4689_PIXEL_ARRAY_WIDTH 2720 > +#define OV4689_PIXEL_ARRAY_HEIGHT 1536 > +#define OV4689_DUMMY_ROWS 8 > +#define OV4689_DUMMY_COLUMNS 16 Adding a comment here to indicate that there are dummy columns in each side would be useful: #define OV4689_DUMMY_ROWS 8 /* 8 dummy rows on each side */ #define OV4689_DUMMY_COLUMNS 16 /* 16 dummy columns on each side */ Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + > static const char *const ov4689_supply_names[] = { > "avdd", /* Analog power */ > "dovdd", /* Digital I/O power */ > @@ -90,10 +95,6 @@ struct ov4689_mode { > u32 vts_def; > u32 exp_def; > u32 pixel_rate; > - u32 sensor_width; > - u32 sensor_height; > - u32 crop_top; > - u32 crop_left; > const struct cci_reg_sequence *reg_list; > unsigned int num_regs; > }; > @@ -254,10 +255,6 @@ static const struct ov4689_mode supported_modes[] = { > .id = OV4689_MODE_2688_1520, > .width = 2688, > .height = 1520, > - .sensor_width = 2720, > - .sensor_height = 1536, > - .crop_top = 8, > - .crop_left = 16, > .exp_def = 1536, > .hts_def = 10296, > .hts_min = 3432, > @@ -385,8 +382,6 @@ static int ov4689_get_selection(struct v4l2_subdev *sd, > struct v4l2_subdev_state *state, > struct v4l2_subdev_selection *sel) > { > - const struct ov4689_mode *mode = to_ov4689(sd)->cur_mode; > - > if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) > return -EINVAL; > > @@ -394,15 +389,17 @@ static int ov4689_get_selection(struct v4l2_subdev *sd, > case V4L2_SEL_TGT_CROP_BOUNDS: > sel->r.top = 0; > sel->r.left = 0; > - sel->r.width = mode->sensor_width; > - sel->r.height = mode->sensor_height; > + sel->r.width = OV4689_PIXEL_ARRAY_WIDTH; > + sel->r.height = OV4689_PIXEL_ARRAY_HEIGHT; > return 0; > case V4L2_SEL_TGT_CROP: > case V4L2_SEL_TGT_CROP_DEFAULT: > - sel->r.top = mode->crop_top; > - sel->r.left = mode->crop_left; > - sel->r.width = mode->width; > - sel->r.height = mode->height; > + sel->r.top = OV4689_DUMMY_ROWS; > + sel->r.left = OV4689_DUMMY_COLUMNS; > + sel->r.width = > + OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_COLUMNS; > + sel->r.height = > + OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_ROWS; > return 0; > } >
On Fri, Feb 23, 2024 at 01:33:01PM +0200, Laurent Pinchart wrote: > Hi Mikhail, > > Thank you for the patch. > > On Mon, Dec 18, 2023 at 08:40:36PM +0300, Mikhail Rudenko wrote: > > Pixel array dimensions and default crop size do not belong to the > > ov4689_mode structure, since they are mode independent. Make them > > defines instead. > > > > Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> > > --- > > drivers/media/i2c/ov4689.c | 29 +++++++++++++---------------- > > 1 file changed, 13 insertions(+), 16 deletions(-) > > > > diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c > > index b43fb1d7b15f..475508559e3e 100644 > > --- a/drivers/media/i2c/ov4689.c > > +++ b/drivers/media/i2c/ov4689.c > > @@ -70,6 +70,11 @@ > > #define OV4689_LANES 4 > > #define OV4689_XVCLK_FREQ 24000000 > > > > +#define OV4689_PIXEL_ARRAY_WIDTH 2720 > > +#define OV4689_PIXEL_ARRAY_HEIGHT 1536 > > +#define OV4689_DUMMY_ROWS 8 > > +#define OV4689_DUMMY_COLUMNS 16 > > Adding a comment here to indicate that there are dummy columns in each > side would be useful: > > #define OV4689_DUMMY_ROWS 8 /* 8 dummy rows on each side */ > #define OV4689_DUMMY_COLUMNS 16 /* 16 dummy columns on each side */ > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > + > > static const char *const ov4689_supply_names[] = { > > "avdd", /* Analog power */ > > "dovdd", /* Digital I/O power */ > > @@ -90,10 +95,6 @@ struct ov4689_mode { > > u32 vts_def; > > u32 exp_def; > > u32 pixel_rate; > > - u32 sensor_width; > > - u32 sensor_height; > > - u32 crop_top; > > - u32 crop_left; > > const struct cci_reg_sequence *reg_list; > > unsigned int num_regs; > > }; > > @@ -254,10 +255,6 @@ static const struct ov4689_mode supported_modes[] = { > > .id = OV4689_MODE_2688_1520, > > .width = 2688, > > .height = 1520, > > - .sensor_width = 2720, > > - .sensor_height = 1536, > > - .crop_top = 8, > > - .crop_left = 16, > > .exp_def = 1536, > > .hts_def = 10296, > > .hts_min = 3432, > > @@ -385,8 +382,6 @@ static int ov4689_get_selection(struct v4l2_subdev *sd, > > struct v4l2_subdev_state *state, > > struct v4l2_subdev_selection *sel) > > { > > - const struct ov4689_mode *mode = to_ov4689(sd)->cur_mode; > > - > > if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) > > return -EINVAL; > > > > @@ -394,15 +389,17 @@ static int ov4689_get_selection(struct v4l2_subdev *sd, > > case V4L2_SEL_TGT_CROP_BOUNDS: > > sel->r.top = 0; > > sel->r.left = 0; > > - sel->r.width = mode->sensor_width; > > - sel->r.height = mode->sensor_height; > > + sel->r.width = OV4689_PIXEL_ARRAY_WIDTH; > > + sel->r.height = OV4689_PIXEL_ARRAY_HEIGHT; > > return 0; > > case V4L2_SEL_TGT_CROP: > > case V4L2_SEL_TGT_CROP_DEFAULT: > > - sel->r.top = mode->crop_top; > > - sel->r.left = mode->crop_left; > > - sel->r.width = mode->width; > > - sel->r.height = mode->height; > > + sel->r.top = OV4689_DUMMY_ROWS; > > + sel->r.left = OV4689_DUMMY_COLUMNS; > > + sel->r.width = > > + OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_COLUMNS; > > + sel->r.height = > > + OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_ROWS; I spoke too fast: this should be OV4689_PIXEL_ARRAY_HEIGHT, not OV4689_PIXEL_ARRAY_WIDTH. > > return 0; > > } > >
Hi Laurent, and thanks for the review! On 2024-02-23 at 13:33 +02, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > Hi Mikhail, > > Thank you for the patch. > > On Mon, Dec 18, 2023 at 08:40:36PM +0300, Mikhail Rudenko wrote: >> Pixel array dimensions and default crop size do not belong to the >> ov4689_mode structure, since they are mode independent. Make them >> defines instead. >> >> Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> >> --- >> drivers/media/i2c/ov4689.c | 29 +++++++++++++---------------- >> 1 file changed, 13 insertions(+), 16 deletions(-) >> >> diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c >> index b43fb1d7b15f..475508559e3e 100644 >> --- a/drivers/media/i2c/ov4689.c >> +++ b/drivers/media/i2c/ov4689.c >> @@ -70,6 +70,11 @@ >> #define OV4689_LANES 4 >> #define OV4689_XVCLK_FREQ 24000000 >> >> +#define OV4689_PIXEL_ARRAY_WIDTH 2720 >> +#define OV4689_PIXEL_ARRAY_HEIGHT 1536 >> +#define OV4689_DUMMY_ROWS 8 >> +#define OV4689_DUMMY_COLUMNS 16 > > Adding a comment here to indicate that there are dummy columns in each > side would be useful: > > #define OV4689_DUMMY_ROWS 8 /* 8 dummy rows on each side */ > #define OV4689_DUMMY_COLUMNS 16 /* 16 dummy columns on each side */ Will add the comments in v3. > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > >> + >> static const char *const ov4689_supply_names[] = { >> "avdd", /* Analog power */ >> "dovdd", /* Digital I/O power */ >> @@ -90,10 +95,6 @@ struct ov4689_mode { >> u32 vts_def; >> u32 exp_def; >> u32 pixel_rate; >> - u32 sensor_width; >> - u32 sensor_height; >> - u32 crop_top; >> - u32 crop_left; >> const struct cci_reg_sequence *reg_list; >> unsigned int num_regs; >> }; >> @@ -254,10 +255,6 @@ static const struct ov4689_mode supported_modes[] = { >> .id = OV4689_MODE_2688_1520, >> .width = 2688, >> .height = 1520, >> - .sensor_width = 2720, >> - .sensor_height = 1536, >> - .crop_top = 8, >> - .crop_left = 16, >> .exp_def = 1536, >> .hts_def = 10296, >> .hts_min = 3432, >> @@ -385,8 +382,6 @@ static int ov4689_get_selection(struct v4l2_subdev *sd, >> struct v4l2_subdev_state *state, >> struct v4l2_subdev_selection *sel) >> { >> - const struct ov4689_mode *mode = to_ov4689(sd)->cur_mode; >> - >> if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) >> return -EINVAL; >> >> @@ -394,15 +389,17 @@ static int ov4689_get_selection(struct v4l2_subdev *sd, >> case V4L2_SEL_TGT_CROP_BOUNDS: >> sel->r.top = 0; >> sel->r.left = 0; >> - sel->r.width = mode->sensor_width; >> - sel->r.height = mode->sensor_height; >> + sel->r.width = OV4689_PIXEL_ARRAY_WIDTH; >> + sel->r.height = OV4689_PIXEL_ARRAY_HEIGHT; >> return 0; >> case V4L2_SEL_TGT_CROP: >> case V4L2_SEL_TGT_CROP_DEFAULT: >> - sel->r.top = mode->crop_top; >> - sel->r.left = mode->crop_left; >> - sel->r.width = mode->width; >> - sel->r.height = mode->height; >> + sel->r.top = OV4689_DUMMY_ROWS; >> + sel->r.left = OV4689_DUMMY_COLUMNS; >> + sel->r.width = >> + OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_COLUMNS; >> + sel->r.height = >> + OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_ROWS; >> return 0; >> } >> -- Best regards, Mikhail Rudenko
Hi Laurent, and thanks for the review! On 2024-02-23 at 13:36 +02, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > On Fri, Feb 23, 2024 at 01:33:01PM +0200, Laurent Pinchart wrote: >> Hi Mikhail, >> >> Thank you for the patch. >> >> On Mon, Dec 18, 2023 at 08:40:36PM +0300, Mikhail Rudenko wrote: >> > Pixel array dimensions and default crop size do not belong to the >> > ov4689_mode structure, since they are mode independent. Make them >> > defines instead. >> > >> > Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> >> > --- >> > drivers/media/i2c/ov4689.c | 29 +++++++++++++---------------- >> > 1 file changed, 13 insertions(+), 16 deletions(-) >> > >> > diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c >> > index b43fb1d7b15f..475508559e3e 100644 >> > --- a/drivers/media/i2c/ov4689.c >> > +++ b/drivers/media/i2c/ov4689.c >> > @@ -70,6 +70,11 @@ >> > #define OV4689_LANES 4 >> > #define OV4689_XVCLK_FREQ 24000000 >> > >> > +#define OV4689_PIXEL_ARRAY_WIDTH 2720 >> > +#define OV4689_PIXEL_ARRAY_HEIGHT 1536 >> > +#define OV4689_DUMMY_ROWS 8 >> > +#define OV4689_DUMMY_COLUMNS 16 >> >> Adding a comment here to indicate that there are dummy columns in each >> side would be useful: >> >> #define OV4689_DUMMY_ROWS 8 /* 8 dummy rows on each side */ >> #define OV4689_DUMMY_COLUMNS 16 /* 16 dummy columns on each side */ >> >> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> >> >> > + >> > static const char *const ov4689_supply_names[] = { >> > "avdd", /* Analog power */ >> > "dovdd", /* Digital I/O power */ >> > @@ -90,10 +95,6 @@ struct ov4689_mode { >> > u32 vts_def; >> > u32 exp_def; >> > u32 pixel_rate; >> > - u32 sensor_width; >> > - u32 sensor_height; >> > - u32 crop_top; >> > - u32 crop_left; >> > const struct cci_reg_sequence *reg_list; >> > unsigned int num_regs; >> > }; >> > @@ -254,10 +255,6 @@ static const struct ov4689_mode supported_modes[] = { >> > .id = OV4689_MODE_2688_1520, >> > .width = 2688, >> > .height = 1520, >> > - .sensor_width = 2720, >> > - .sensor_height = 1536, >> > - .crop_top = 8, >> > - .crop_left = 16, >> > .exp_def = 1536, >> > .hts_def = 10296, >> > .hts_min = 3432, >> > @@ -385,8 +382,6 @@ static int ov4689_get_selection(struct v4l2_subdev *sd, >> > struct v4l2_subdev_state *state, >> > struct v4l2_subdev_selection *sel) >> > { >> > - const struct ov4689_mode *mode = to_ov4689(sd)->cur_mode; >> > - >> > if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) >> > return -EINVAL; >> > >> > @@ -394,15 +389,17 @@ static int ov4689_get_selection(struct v4l2_subdev *sd, >> > case V4L2_SEL_TGT_CROP_BOUNDS: >> > sel->r.top = 0; >> > sel->r.left = 0; >> > - sel->r.width = mode->sensor_width; >> > - sel->r.height = mode->sensor_height; >> > + sel->r.width = OV4689_PIXEL_ARRAY_WIDTH; >> > + sel->r.height = OV4689_PIXEL_ARRAY_HEIGHT; >> > return 0; >> > case V4L2_SEL_TGT_CROP: >> > case V4L2_SEL_TGT_CROP_DEFAULT: >> > - sel->r.top = mode->crop_top; >> > - sel->r.left = mode->crop_left; >> > - sel->r.width = mode->width; >> > - sel->r.height = mode->height; >> > + sel->r.top = OV4689_DUMMY_ROWS; >> > + sel->r.left = OV4689_DUMMY_COLUMNS; >> > + sel->r.width = >> > + OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_COLUMNS; >> > + sel->r.height = >> > + OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_ROWS; > > I spoke too fast: this should be OV4689_PIXEL_ARRAY_HEIGHT, not > OV4689_PIXEL_ARRAY_WIDTH. Good catch, will fix in v3. >> > return 0; >> > } >> > -- Best regards, Mikhail Rudenko
diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c index b43fb1d7b15f..475508559e3e 100644 --- a/drivers/media/i2c/ov4689.c +++ b/drivers/media/i2c/ov4689.c @@ -70,6 +70,11 @@ #define OV4689_LANES 4 #define OV4689_XVCLK_FREQ 24000000 +#define OV4689_PIXEL_ARRAY_WIDTH 2720 +#define OV4689_PIXEL_ARRAY_HEIGHT 1536 +#define OV4689_DUMMY_ROWS 8 +#define OV4689_DUMMY_COLUMNS 16 + static const char *const ov4689_supply_names[] = { "avdd", /* Analog power */ "dovdd", /* Digital I/O power */ @@ -90,10 +95,6 @@ struct ov4689_mode { u32 vts_def; u32 exp_def; u32 pixel_rate; - u32 sensor_width; - u32 sensor_height; - u32 crop_top; - u32 crop_left; const struct cci_reg_sequence *reg_list; unsigned int num_regs; }; @@ -254,10 +255,6 @@ static const struct ov4689_mode supported_modes[] = { .id = OV4689_MODE_2688_1520, .width = 2688, .height = 1520, - .sensor_width = 2720, - .sensor_height = 1536, - .crop_top = 8, - .crop_left = 16, .exp_def = 1536, .hts_def = 10296, .hts_min = 3432, @@ -385,8 +382,6 @@ static int ov4689_get_selection(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, struct v4l2_subdev_selection *sel) { - const struct ov4689_mode *mode = to_ov4689(sd)->cur_mode; - if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; @@ -394,15 +389,17 @@ static int ov4689_get_selection(struct v4l2_subdev *sd, case V4L2_SEL_TGT_CROP_BOUNDS: sel->r.top = 0; sel->r.left = 0; - sel->r.width = mode->sensor_width; - sel->r.height = mode->sensor_height; + sel->r.width = OV4689_PIXEL_ARRAY_WIDTH; + sel->r.height = OV4689_PIXEL_ARRAY_HEIGHT; return 0; case V4L2_SEL_TGT_CROP: case V4L2_SEL_TGT_CROP_DEFAULT: - sel->r.top = mode->crop_top; - sel->r.left = mode->crop_left; - sel->r.width = mode->width; - sel->r.height = mode->height; + sel->r.top = OV4689_DUMMY_ROWS; + sel->r.left = OV4689_DUMMY_COLUMNS; + sel->r.width = + OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_COLUMNS; + sel->r.height = + OV4689_PIXEL_ARRAY_WIDTH - 2 * OV4689_DUMMY_ROWS; return 0; }
Pixel array dimensions and default crop size do not belong to the ov4689_mode structure, since they are mode independent. Make them defines instead. Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> --- drivers/media/i2c/ov4689.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-)