| Message ID | 20240224-pci-dbi-rework-v8-7-64c7fd0cfe64@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host | expand |
On Sat, Feb 24, 2024 at 12:24:13PM +0530, Manivannan Sadhasivam wrote: > "core_init_notifier" flag is set by the glue drivers requiring refclk from > the host to complete the DWC core initialization. Also, those drivers will > send a notification to the EPF drivers once the initialization is fully > completed using the pci_epc_init_notify() API. Only then, the EPF drivers > will start functioning. > > For the rest of the drivers generating refclk locally, EPF drivers will > start functioning post binding with them. EPF drivers rely on the > 'core_init_notifier' flag to differentiate between the drivers. > Unfortunately, this creates two different flows for the EPF drivers. > > So to avoid that, let's get rid of the "core_init_notifier" flag and follow > a single initialization flow for the EPF drivers. This is done by calling > the dw_pcie_ep_init_notify() from all glue drivers after the completion of > dw_pcie_ep_init_registers() API. This will allow all the glue drivers to > send the notification to the EPF drivers once the initialization is fully > completed. > > Only difference here is that, the drivers requiring refclk from host will > send the notification once refclk is received, while others will send it > during probe time itself. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> > --- > drivers/pci/controller/dwc/pci-dra7xx.c | 2 ++ > drivers/pci/controller/dwc/pci-imx6.c | 2 ++ > drivers/pci/controller/dwc/pci-keystone.c | 2 ++ > drivers/pci/controller/dwc/pci-layerscape-ep.c | 2 ++ > drivers/pci/controller/dwc/pcie-designware-plat.c | 2 ++ > drivers/pci/controller/dwc/pcie-qcom-ep.c | 1 - > drivers/pci/controller/dwc/pcie-rcar-gen4.c | 2 ++ > drivers/pci/controller/dwc/pcie-tegra194.c | 1 - > drivers/pci/controller/dwc/pcie-uniphier-ep.c | 2 ++ > drivers/pci/endpoint/functions/pci-epf-test.c | 18 +++++------------- > include/linux/pci-epc.h | 3 --- > 11 files changed, 19 insertions(+), 18 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c > index 395042b29ffc..d2d17d37d3e0 100644 > --- a/drivers/pci/controller/dwc/pci-dra7xx.c > +++ b/drivers/pci/controller/dwc/pci-dra7xx.c > @@ -474,6 +474,8 @@ static int dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx, > return ret; > } > > + dw_pcie_ep_init_notify(ep); > + > return 0; > } > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index bfcafa440ddb..894b5de76e3a 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -1144,6 +1144,8 @@ static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie, > return ret; > } > > + dw_pcie_ep_init_notify(ep); > + > /* Start LTSSM. */ > imx6_pcie_ltssm_enable(dev); > > diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c > index 8392894ed286..1d00c5fa14ce 100644 > --- a/drivers/pci/controller/dwc/pci-keystone.c > +++ b/drivers/pci/controller/dwc/pci-keystone.c > @@ -1293,6 +1293,8 @@ static int ks_pcie_probe(struct platform_device *pdev) > goto err_ep_init; > } > > + dw_pcie_ep_init_notify(&pci->ep); > + > break; > default: > dev_err(dev, "INVALID device type %d\n", mode); > diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c > index b712fdd06549..c513598a46d7 100644 > --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c > @@ -283,6 +283,8 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev) > return ret; > } > > + dw_pcie_ep_init_notify(&pci->ep); > + > return ls_pcie_ep_interrupt_init(pcie, pdev); > } > > diff --git a/drivers/pci/controller/dwc/pcie-designware-plat.c b/drivers/pci/controller/dwc/pcie-designware-plat.c > index ca9b22e654cd..8490c5d6ff9f 100644 > --- a/drivers/pci/controller/dwc/pcie-designware-plat.c > +++ b/drivers/pci/controller/dwc/pcie-designware-plat.c > @@ -154,6 +154,8 @@ static int dw_plat_pcie_probe(struct platform_device *pdev) > dw_pcie_ep_deinit(&pci->ep); > } > > + dw_pcie_ep_init_notify(&pci->ep); > + > break; > default: > dev_err(dev, "INVALID device type %d\n", dw_plat_pcie->mode); > diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c > index 3697b4a944cc..2fb8c15e7a91 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c > +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c > @@ -775,7 +775,6 @@ static void qcom_pcie_ep_init_debugfs(struct qcom_pcie_ep *pcie_ep) > > static const struct pci_epc_features qcom_pcie_epc_features = { > .linkup_notifier = true, > - .core_init_notifier = true, > .msi_capable = true, > .msix_capable = false, > .align = SZ_4K, > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c > index fb7c03639a53..0448928017f3 100644 > --- a/drivers/pci/controller/dwc/pcie-rcar-gen4.c > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c > @@ -435,6 +435,8 @@ static int rcar_gen4_add_dw_pcie_ep(struct rcar_gen4_pcie *rcar) > rcar_gen4_pcie_ep_deinit(rcar); > } > > + dw_pcie_ep_init_notify(ep); > + > return ret; > } > > diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c > index 264ee76bf008..e02deb31a72d 100644 > --- a/drivers/pci/controller/dwc/pcie-tegra194.c > +++ b/drivers/pci/controller/dwc/pcie-tegra194.c > @@ -2006,7 +2006,6 @@ static int tegra_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no, > > static const struct pci_epc_features tegra_pcie_epc_features = { > .linkup_notifier = true, > - .core_init_notifier = true, > .msi_capable = false, > .msix_capable = false, > .reserved_bar = 1 << BAR_2 | 1 << BAR_3 | 1 << BAR_4 | 1 << BAR_5, > diff --git a/drivers/pci/controller/dwc/pcie-uniphier-ep.c b/drivers/pci/controller/dwc/pcie-uniphier-ep.c > index 82ccaea089be..eb1d79fdb1f1 100644 > --- a/drivers/pci/controller/dwc/pcie-uniphier-ep.c > +++ b/drivers/pci/controller/dwc/pcie-uniphier-ep.c > @@ -410,6 +410,8 @@ static int uniphier_pcie_ep_probe(struct platform_device *pdev) > return ret; > } > > + dw_pcie_ep_init_notify(&priv->pci.ep); > + > return 0; > } > > diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c > index 18c80002d3bd..fc0282b0d626 100644 > --- a/drivers/pci/endpoint/functions/pci-epf-test.c > +++ b/drivers/pci/endpoint/functions/pci-epf-test.c > @@ -753,6 +753,7 @@ static int pci_epf_test_core_init(struct pci_epf *epf) > const struct pci_epc_features *epc_features; > struct pci_epc *epc = epf->epc; > struct device *dev = &epf->dev; > + bool linkup_notifier = false; > bool msix_capable = false; > bool msi_capable = true; > int ret; > @@ -795,6 +796,10 @@ static int pci_epf_test_core_init(struct pci_epf *epf) > } > } > > + linkup_notifier = epc_features->linkup_notifier; > + if (!linkup_notifier) > + queue_work(kpcitest_workqueue, &epf_test->cmd_handler.work); > + > return 0; > } > > @@ -901,8 +906,6 @@ static int pci_epf_test_bind(struct pci_epf *epf) > const struct pci_epc_features *epc_features; > enum pci_barno test_reg_bar = BAR_0; > struct pci_epc *epc = epf->epc; > - bool linkup_notifier = false; > - bool core_init_notifier = false; > > if (WARN_ON_ONCE(!epc)) > return -EINVAL; > @@ -913,8 +916,6 @@ static int pci_epf_test_bind(struct pci_epf *epf) > return -EOPNOTSUPP; > } > > - linkup_notifier = epc_features->linkup_notifier; > - core_init_notifier = epc_features->core_init_notifier; > test_reg_bar = pci_epc_get_first_free_bar(epc_features); > if (test_reg_bar < 0) > return -EINVAL; > @@ -927,21 +928,12 @@ static int pci_epf_test_bind(struct pci_epf *epf) > if (ret) > return ret; > > - if (!core_init_notifier) { > - ret = pci_epf_test_core_init(epf); > - if (ret) > - return ret; > - } > - > epf_test->dma_supported = true; > > ret = pci_epf_test_init_dma_chan(epf_test); > if (ret) > epf_test->dma_supported = false; > > - if (!linkup_notifier && !core_init_notifier) > - queue_work(kpcitest_workqueue, &epf_test->cmd_handler.work); > - > return 0; > } > > diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h > index 40ea18f5aa02..03d22aed5ac6 100644 > --- a/include/linux/pci-epc.h > +++ b/include/linux/pci-epc.h > @@ -148,8 +148,6 @@ struct pci_epc { > /** > * struct pci_epc_features - features supported by a EPC device per function > * @linkup_notifier: indicate if the EPC device can notify EPF driver on link up > - * @core_init_notifier: indicate cores that can notify about their availability > - * for initialization > * @msi_capable: indicate if the endpoint function has MSI capability > * @msix_capable: indicate if the endpoint function has MSI-X capability > * @reserved_bar: bitmap to indicate reserved BAR unavailable to function driver > @@ -159,7 +157,6 @@ struct pci_epc { > */ > struct pci_epc_features { > unsigned int linkup_notifier : 1; > - unsigned int core_init_notifier : 1; > unsigned int msi_capable : 1; > unsigned int msix_capable : 1; > u8 reserved_bar; > > -- > 2.25.1 >
Hello Mani, On Sat, Feb 24, 2024 at 12:24:13PM +0530, Manivannan Sadhasivam wrote: > "core_init_notifier" flag is set by the glue drivers requiring refclk from > the host to complete the DWC core initialization. Also, those drivers will > send a notification to the EPF drivers once the initialization is fully > completed using the pci_epc_init_notify() API. Only then, the EPF drivers > will start functioning. > > For the rest of the drivers generating refclk locally, EPF drivers will > start functioning post binding with them. EPF drivers rely on the > 'core_init_notifier' flag to differentiate between the drivers. > Unfortunately, this creates two different flows for the EPF drivers. > > So to avoid that, let's get rid of the "core_init_notifier" flag and follow > a single initialization flow for the EPF drivers. This is done by calling > the dw_pcie_ep_init_notify() from all glue drivers after the completion of > dw_pcie_ep_init_registers() API. This will allow all the glue drivers to > send the notification to the EPF drivers once the initialization is fully > completed. > > Only difference here is that, the drivers requiring refclk from host will > send the notification once refclk is received, while others will send it > during probe time itself. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > drivers/pci/controller/dwc/pci-dra7xx.c | 2 ++ > drivers/pci/controller/dwc/pci-imx6.c | 2 ++ > drivers/pci/controller/dwc/pci-keystone.c | 2 ++ > drivers/pci/controller/dwc/pci-layerscape-ep.c | 2 ++ > drivers/pci/controller/dwc/pcie-designware-plat.c | 2 ++ > drivers/pci/controller/dwc/pcie-qcom-ep.c | 1 - > drivers/pci/controller/dwc/pcie-rcar-gen4.c | 2 ++ > drivers/pci/controller/dwc/pcie-tegra194.c | 1 - > drivers/pci/controller/dwc/pcie-uniphier-ep.c | 2 ++ > drivers/pci/endpoint/functions/pci-epf-test.c | 18 +++++------------- > include/linux/pci-epc.h | 3 --- pcie-artpec6.c:static const struct dw_pcie_ep_ops pcie_ep_ops = { pcie-keembay.c:static const struct dw_pcie_ep_ops keembay_pcie_ep_ops = { Where is the love for these drivers? ;) Kind regards, Niklas
On Thu, Feb 29, 2024 at 12:23:16PM +0100, Niklas Cassel wrote: > Hello Mani, > > On Sat, Feb 24, 2024 at 12:24:13PM +0530, Manivannan Sadhasivam wrote: > > "core_init_notifier" flag is set by the glue drivers requiring refclk from > > the host to complete the DWC core initialization. Also, those drivers will > > send a notification to the EPF drivers once the initialization is fully > > completed using the pci_epc_init_notify() API. Only then, the EPF drivers > > will start functioning. > > > > For the rest of the drivers generating refclk locally, EPF drivers will > > start functioning post binding with them. EPF drivers rely on the > > 'core_init_notifier' flag to differentiate between the drivers. > > Unfortunately, this creates two different flows for the EPF drivers. > > > > So to avoid that, let's get rid of the "core_init_notifier" flag and follow > > a single initialization flow for the EPF drivers. This is done by calling > > the dw_pcie_ep_init_notify() from all glue drivers after the completion of > > dw_pcie_ep_init_registers() API. This will allow all the glue drivers to > > send the notification to the EPF drivers once the initialization is fully > > completed. > > > > Only difference here is that, the drivers requiring refclk from host will > > send the notification once refclk is received, while others will send it > > during probe time itself. > > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > --- > > drivers/pci/controller/dwc/pci-dra7xx.c | 2 ++ > > drivers/pci/controller/dwc/pci-imx6.c | 2 ++ > > drivers/pci/controller/dwc/pci-keystone.c | 2 ++ > > drivers/pci/controller/dwc/pci-layerscape-ep.c | 2 ++ > > drivers/pci/controller/dwc/pcie-designware-plat.c | 2 ++ > > drivers/pci/controller/dwc/pcie-qcom-ep.c | 1 - > > drivers/pci/controller/dwc/pcie-rcar-gen4.c | 2 ++ > > drivers/pci/controller/dwc/pcie-tegra194.c | 1 - > > drivers/pci/controller/dwc/pcie-uniphier-ep.c | 2 ++ > > drivers/pci/endpoint/functions/pci-epf-test.c | 18 +++++------------- > > include/linux/pci-epc.h | 3 --- > > pcie-artpec6.c:static const struct dw_pcie_ep_ops pcie_ep_ops = { > pcie-keembay.c:static const struct dw_pcie_ep_ops keembay_pcie_ep_ops = { > > Where is the love for these drivers? ;) > Ah, my grep skills got exposed :( Will fix them. - Mani
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c index 395042b29ffc..d2d17d37d3e0 100644 --- a/drivers/pci/controller/dwc/pci-dra7xx.c +++ b/drivers/pci/controller/dwc/pci-dra7xx.c @@ -474,6 +474,8 @@ static int dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx, return ret; } + dw_pcie_ep_init_notify(ep); + return 0; } diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index bfcafa440ddb..894b5de76e3a 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -1144,6 +1144,8 @@ static int imx6_add_pcie_ep(struct imx6_pcie *imx6_pcie, return ret; } + dw_pcie_ep_init_notify(ep); + /* Start LTSSM. */ imx6_pcie_ltssm_enable(dev); diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index 8392894ed286..1d00c5fa14ce 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -1293,6 +1293,8 @@ static int ks_pcie_probe(struct platform_device *pdev) goto err_ep_init; } + dw_pcie_ep_init_notify(&pci->ep); + break; default: dev_err(dev, "INVALID device type %d\n", mode); diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c index b712fdd06549..c513598a46d7 100644 --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c @@ -283,6 +283,8 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev) return ret; } + dw_pcie_ep_init_notify(&pci->ep); + return ls_pcie_ep_interrupt_init(pcie, pdev); } diff --git a/drivers/pci/controller/dwc/pcie-designware-plat.c b/drivers/pci/controller/dwc/pcie-designware-plat.c index ca9b22e654cd..8490c5d6ff9f 100644 --- a/drivers/pci/controller/dwc/pcie-designware-plat.c +++ b/drivers/pci/controller/dwc/pcie-designware-plat.c @@ -154,6 +154,8 @@ static int dw_plat_pcie_probe(struct platform_device *pdev) dw_pcie_ep_deinit(&pci->ep); } + dw_pcie_ep_init_notify(&pci->ep); + break; default: dev_err(dev, "INVALID device type %d\n", dw_plat_pcie->mode); diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c index 3697b4a944cc..2fb8c15e7a91 100644 --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c @@ -775,7 +775,6 @@ static void qcom_pcie_ep_init_debugfs(struct qcom_pcie_ep *pcie_ep) static const struct pci_epc_features qcom_pcie_epc_features = { .linkup_notifier = true, - .core_init_notifier = true, .msi_capable = true, .msix_capable = false, .align = SZ_4K, diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c index fb7c03639a53..0448928017f3 100644 --- a/drivers/pci/controller/dwc/pcie-rcar-gen4.c +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c @@ -435,6 +435,8 @@ static int rcar_gen4_add_dw_pcie_ep(struct rcar_gen4_pcie *rcar) rcar_gen4_pcie_ep_deinit(rcar); } + dw_pcie_ep_init_notify(ep); + return ret; } diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c index 264ee76bf008..e02deb31a72d 100644 --- a/drivers/pci/controller/dwc/pcie-tegra194.c +++ b/drivers/pci/controller/dwc/pcie-tegra194.c @@ -2006,7 +2006,6 @@ static int tegra_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no, static const struct pci_epc_features tegra_pcie_epc_features = { .linkup_notifier = true, - .core_init_notifier = true, .msi_capable = false, .msix_capable = false, .reserved_bar = 1 << BAR_2 | 1 << BAR_3 | 1 << BAR_4 | 1 << BAR_5, diff --git a/drivers/pci/controller/dwc/pcie-uniphier-ep.c b/drivers/pci/controller/dwc/pcie-uniphier-ep.c index 82ccaea089be..eb1d79fdb1f1 100644 --- a/drivers/pci/controller/dwc/pcie-uniphier-ep.c +++ b/drivers/pci/controller/dwc/pcie-uniphier-ep.c @@ -410,6 +410,8 @@ static int uniphier_pcie_ep_probe(struct platform_device *pdev) return ret; } + dw_pcie_ep_init_notify(&priv->pci.ep); + return 0; } diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c index 18c80002d3bd..fc0282b0d626 100644 --- a/drivers/pci/endpoint/functions/pci-epf-test.c +++ b/drivers/pci/endpoint/functions/pci-epf-test.c @@ -753,6 +753,7 @@ static int pci_epf_test_core_init(struct pci_epf *epf) const struct pci_epc_features *epc_features; struct pci_epc *epc = epf->epc; struct device *dev = &epf->dev; + bool linkup_notifier = false; bool msix_capable = false; bool msi_capable = true; int ret; @@ -795,6 +796,10 @@ static int pci_epf_test_core_init(struct pci_epf *epf) } } + linkup_notifier = epc_features->linkup_notifier; + if (!linkup_notifier) + queue_work(kpcitest_workqueue, &epf_test->cmd_handler.work); + return 0; } @@ -901,8 +906,6 @@ static int pci_epf_test_bind(struct pci_epf *epf) const struct pci_epc_features *epc_features; enum pci_barno test_reg_bar = BAR_0; struct pci_epc *epc = epf->epc; - bool linkup_notifier = false; - bool core_init_notifier = false; if (WARN_ON_ONCE(!epc)) return -EINVAL; @@ -913,8 +916,6 @@ static int pci_epf_test_bind(struct pci_epf *epf) return -EOPNOTSUPP; } - linkup_notifier = epc_features->linkup_notifier; - core_init_notifier = epc_features->core_init_notifier; test_reg_bar = pci_epc_get_first_free_bar(epc_features); if (test_reg_bar < 0) return -EINVAL; @@ -927,21 +928,12 @@ static int pci_epf_test_bind(struct pci_epf *epf) if (ret) return ret; - if (!core_init_notifier) { - ret = pci_epf_test_core_init(epf); - if (ret) - return ret; - } - epf_test->dma_supported = true; ret = pci_epf_test_init_dma_chan(epf_test); if (ret) epf_test->dma_supported = false; - if (!linkup_notifier && !core_init_notifier) - queue_work(kpcitest_workqueue, &epf_test->cmd_handler.work); - return 0; } diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h index 40ea18f5aa02..03d22aed5ac6 100644 --- a/include/linux/pci-epc.h +++ b/include/linux/pci-epc.h @@ -148,8 +148,6 @@ struct pci_epc { /** * struct pci_epc_features - features supported by a EPC device per function * @linkup_notifier: indicate if the EPC device can notify EPF driver on link up - * @core_init_notifier: indicate cores that can notify about their availability - * for initialization * @msi_capable: indicate if the endpoint function has MSI capability * @msix_capable: indicate if the endpoint function has MSI-X capability * @reserved_bar: bitmap to indicate reserved BAR unavailable to function driver @@ -159,7 +157,6 @@ struct pci_epc { */ struct pci_epc_features { unsigned int linkup_notifier : 1; - unsigned int core_init_notifier : 1; unsigned int msi_capable : 1; unsigned int msix_capable : 1; u8 reserved_bar;
"core_init_notifier" flag is set by the glue drivers requiring refclk from the host to complete the DWC core initialization. Also, those drivers will send a notification to the EPF drivers once the initialization is fully completed using the pci_epc_init_notify() API. Only then, the EPF drivers will start functioning. For the rest of the drivers generating refclk locally, EPF drivers will start functioning post binding with them. EPF drivers rely on the 'core_init_notifier' flag to differentiate between the drivers. Unfortunately, this creates two different flows for the EPF drivers. So to avoid that, let's get rid of the "core_init_notifier" flag and follow a single initialization flow for the EPF drivers. This is done by calling the dw_pcie_ep_init_notify() from all glue drivers after the completion of dw_pcie_ep_init_registers() API. This will allow all the glue drivers to send the notification to the EPF drivers once the initialization is fully completed. Only difference here is that, the drivers requiring refclk from host will send the notification once refclk is received, while others will send it during probe time itself. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/pci/controller/dwc/pci-dra7xx.c | 2 ++ drivers/pci/controller/dwc/pci-imx6.c | 2 ++ drivers/pci/controller/dwc/pci-keystone.c | 2 ++ drivers/pci/controller/dwc/pci-layerscape-ep.c | 2 ++ drivers/pci/controller/dwc/pcie-designware-plat.c | 2 ++ drivers/pci/controller/dwc/pcie-qcom-ep.c | 1 - drivers/pci/controller/dwc/pcie-rcar-gen4.c | 2 ++ drivers/pci/controller/dwc/pcie-tegra194.c | 1 - drivers/pci/controller/dwc/pcie-uniphier-ep.c | 2 ++ drivers/pci/endpoint/functions/pci-epf-test.c | 18 +++++------------- include/linux/pci-epc.h | 3 --- 11 files changed, 19 insertions(+), 18 deletions(-)