diff mbox series

[v11,2/4] dt-bindings: remoteproc: add Tightly Coupled Memory (TCM) bindings

Message ID 20240219174437.3722620-3-tanmay.shah@amd.com (mailing list archive)
State Superseded
Headers show
Series add zynqmp TCM bindings | expand

Commit Message

Shah, Tanmay Feb. 19, 2024, 5:44 p.m. UTC
From: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>

Introduce bindings for TCM memory address space on AMD-xilinx Zynq
UltraScale+ platform. It will help in defining TCM in device-tree
and make it's access platform agnostic and data-driven.

Tightly-coupled memories(TCMs) are low-latency memory that provides
predictable instruction execution and predictable data load/store
timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
banks on the ATCM and BTCM ports, for a total of 128 KB of memory.

The TCM resources(reg, reg-names and power-domain) are documented for
each TCM in the R5 node. The reg and reg-names are made as required
properties as we don't want to hardcode TCM addresses for future
platforms and for zu+ legacy implementation will ensure that the
old dts w/o reg/reg-names works and stable ABI is maintained.

It also extends the examples for TCM split and lockstep modes.

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
---

Changes in v11:
  - Fix yamllint warning and reduce indentation as needed

 .../remoteproc/xlnx,zynqmp-r5fss.yaml         | 192 ++++++++++++++++--
 1 file changed, 170 insertions(+), 22 deletions(-)

Comments

Shah, Tanmay Feb. 28, 2024, 7:20 p.m. UTC | #1
Hi Krzysztof,

Ping for reviews. Also have question.

I am referring this patch from patchwork link: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240219174437.3722620-8-tanmay.shah@amd.com/

Patchwork shows that dtbs-check was failed, but I am sending dts changes in next patch. So dtbs-check failure only with bindings patch is expected.

How to resolve this? Should I send dtb changes same as bindings? Or we can ignore dtbs-check errors for now?

Thanks,

Tanmay

On 2/19/24 11:44 AM, Tanmay Shah wrote:
> From: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
>
> Introduce bindings for TCM memory address space on AMD-xilinx Zynq
> UltraScale+ platform. It will help in defining TCM in device-tree
> and make it's access platform agnostic and data-driven.
>
> Tightly-coupled memories(TCMs) are low-latency memory that provides
> predictable instruction execution and predictable data load/store
> timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
> banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
>
> The TCM resources(reg, reg-names and power-domain) are documented for
> each TCM in the R5 node. The reg and reg-names are made as required
> properties as we don't want to hardcode TCM addresses for future
> platforms and for zu+ legacy implementation will ensure that the
> old dts w/o reg/reg-names works and stable ABI is maintained.
>
> It also extends the examples for TCM split and lockstep modes.
>
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
> Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
> ---
>
> Changes in v11:
>   - Fix yamllint warning and reduce indentation as needed
>
>  .../remoteproc/xlnx,zynqmp-r5fss.yaml         | 192 ++++++++++++++++--
>  1 file changed, 170 insertions(+), 22 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> index 78aac69f1060..77030edf41fa 100644
> --- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> @@ -20,9 +20,21 @@ properties:
>    compatible:
>      const: xlnx,zynqmp-r5fss
>  
> +  "#address-cells":
> +    const: 2
> +
> +  "#size-cells":
> +    const: 2
> +
> +  ranges:
> +    description: |
> +      Standard ranges definition providing address translations for
> +      local R5F TCM address spaces to bus addresses.
> +
>    xlnx,cluster-mode:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [0, 1, 2]
> +    default: 1
>      description: |
>        The RPU MPCore can operate in split mode (Dual-processor performance), Safety
>        lock-step mode(Both RPU cores execute the same code in lock-step,
> @@ -37,7 +49,7 @@ properties:
>        2: single cpu mode
>  
>  patternProperties:
> -  "^r5f-[a-f0-9]+$":
> +  "^r5f@[0-9a-f]+$":
>      type: object
>      description: |
>        The RPU is located in the Low Power Domain of the Processor Subsystem.
> @@ -54,9 +66,6 @@ patternProperties:
>        compatible:
>          const: xlnx,zynqmp-r5f
>  
> -      power-domains:
> -        maxItems: 1
> -
>        mboxes:
>          minItems: 1
>          items:
> @@ -101,35 +110,174 @@ patternProperties:
>  
>      required:
>        - compatible
> -      - power-domains
>  
> -    unevaluatedProperties: false
> +allOf:
> +  - if:
> +      properties:
> +        xlnx,cluster-mode:
> +          enum:
> +            - 1
> +    then:
> +      patternProperties:
> +        "^r5f@[0-9a-f]+$":
> +          type: object
> +
> +          properties:
> +            reg:
> +              minItems: 1
> +              items:
> +                - description: ATCM internal memory
> +                - description: BTCM internal memory
> +                - description: extra ATCM memory in lockstep mode
> +                - description: extra BTCM memory in lockstep mode
> +
> +            reg-names:
> +              minItems: 1
> +              items:
> +                - const: atcm0
> +                - const: btcm0
> +                - const: atcm1
> +                - const: btcm1
> +
> +            power-domains:
> +              minItems: 2
> +              maxItems: 5
> +
> +          required:
> +            - reg
> +            - reg-names
> +            - power-domains
> +
> +    else:
> +      patternProperties:
> +        "^r5f@[0-9a-f]+$":
> +          type: object
> +
> +          properties:
> +            reg:
> +              minItems: 1
> +              items:
> +                - description: ATCM internal memory
> +                - description: BTCM internal memory
> +
> +            reg-names:
> +              minItems: 1
> +              items:
> +                - const: atcm0
> +                - const: btcm0
> +
> +            power-domains:
> +              minItems: 2
> +              maxItems: 3
> +
> +          required:
> +            - reg
> +            - reg-names
> +            - power-domains
>  
>  required:
>    - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
>  
>  additionalProperties: false
>  
>  examples:
>    - |
> -    remoteproc {
> -        compatible = "xlnx,zynqmp-r5fss";
> -        xlnx,cluster-mode = <1>;
> -
> -        r5f-0 {
> -            compatible = "xlnx,zynqmp-r5f";
> -            power-domains = <&zynqmp_firmware 0x7>;
> -            memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> -            mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> -            mbox-names = "tx", "rx";
> +    #include <dt-bindings/power/xlnx-zynqmp-power.h>
> +
> +    // Split mode configuration
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        remoteproc@ffe00000 {
> +            compatible = "xlnx,zynqmp-r5fss";
> +            xlnx,cluster-mode = <0>;
> +
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> +                     <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> +                     <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
> +                     <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
> +
> +            r5f@0 {
> +                compatible = "xlnx,zynqmp-r5f";
> +                reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
> +                reg-names = "atcm0", "btcm0";
> +                power-domains = <&zynqmp_firmware PD_RPU_0>,
> +                                <&zynqmp_firmware PD_R5_0_ATCM>,
> +                                <&zynqmp_firmware PD_R5_0_BTCM>;
> +                memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
> +                                <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> +                mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> +                mbox-names = "tx", "rx";
> +            };
> +
> +            r5f@1 {
> +                compatible = "xlnx,zynqmp-r5f";
> +                reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> +                reg-names = "atcm0", "btcm0";
> +                power-domains = <&zynqmp_firmware PD_RPU_1>,
> +                                <&zynqmp_firmware PD_R5_1_ATCM>,
> +                                <&zynqmp_firmware PD_R5_1_BTCM>;
> +                memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
> +                                <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> +                mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> +                mbox-names = "tx", "rx";
> +            };
>          };
> +    };
> +
> +  - |
> +    //Lockstep configuration
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        remoteproc@ffe00000 {
> +            compatible = "xlnx,zynqmp-r5fss";
> +            xlnx,cluster-mode = <1>;
> +
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
> +                     <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
> +                     <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
> +                     <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
> +
> +            r5f@0 {
> +                compatible = "xlnx,zynqmp-r5f";
> +                reg = <0x0 0x0 0x0 0x10000>,
> +                      <0x0 0x20000 0x0 0x10000>,
> +                      <0x0 0x10000 0x0 0x10000>,
> +                      <0x0 0x30000 0x0 0x10000>;
> +                reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
> +                power-domains = <&zynqmp_firmware PD_RPU_0>,
> +                                <&zynqmp_firmware PD_R5_0_ATCM>,
> +                                <&zynqmp_firmware PD_R5_0_BTCM>,
> +                                <&zynqmp_firmware PD_R5_1_ATCM>,
> +                                <&zynqmp_firmware PD_R5_1_BTCM>;
> +                memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
> +                                <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
> +                mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
> +                mbox-names = "tx", "rx";
> +            };
>  
> -        r5f-1 {
> -            compatible = "xlnx,zynqmp-r5f";
> -            power-domains = <&zynqmp_firmware 0x8>;
> -            memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> -            mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> -            mbox-names = "tx", "rx";
> +            r5f@1 {
> +                compatible = "xlnx,zynqmp-r5f";
> +                reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
> +                reg-names = "atcm0", "btcm0";
> +                power-domains = <&zynqmp_firmware PD_RPU_1>,
> +                                <&zynqmp_firmware PD_R5_1_ATCM>,
> +                                <&zynqmp_firmware PD_R5_1_BTCM>;
> +                memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
> +                                <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
> +                mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
> +                mbox-names = "tx", "rx";
> +            };
>          };
>      };
>  ...
Krzysztof Kozlowski Feb. 29, 2024, 9:59 a.m. UTC | #2
On 19/02/2024 18:44, Tanmay Shah wrote:
> From: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
> 
> Introduce bindings for TCM memory address space on AMD-xilinx Zynq
> UltraScale+ platform. It will help in defining TCM in device-tree
> and make it's access platform agnostic and data-driven.
> 
> Tightly-coupled memories(TCMs) are low-latency memory that provides
> predictable instruction execution and predictable data load/store
> timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
> banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
> 
> The TCM resources(reg, reg-names and power-domain) are documented for
> each TCM in the R5 node. The reg and reg-names are made as required
> properties as we don't want to hardcode TCM addresses for future
> platforms and for zu+ legacy implementation will ensure that the
> old dts w/o reg/reg-names works and stable ABI is maintained.
> 
> It also extends the examples for TCM split and lockstep modes.
> 
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
> Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
> ---
> 
> Changes in v11:
>   - Fix yamllint warning and reduce indentation as needed
> 
>  .../remoteproc/xlnx,zynqmp-r5fss.yaml         | 192 ++++++++++++++++--
>  1 file changed, 170 insertions(+), 22 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> index 78aac69f1060..77030edf41fa 100644
> --- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> @@ -20,9 +20,21 @@ properties:
>    compatible:
>      const: xlnx,zynqmp-r5fss
>  
> +  "#address-cells":
> +    const: 2
> +
> +  "#size-cells":
> +    const: 2
> +
> +  ranges:
> +    description: |
> +      Standard ranges definition providing address translations for
> +      local R5F TCM address spaces to bus addresses.
> +
>    xlnx,cluster-mode:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [0, 1, 2]
> +    default: 1
>      description: |
>        The RPU MPCore can operate in split mode (Dual-processor performance), Safety
>        lock-step mode(Both RPU cores execute the same code in lock-step,
> @@ -37,7 +49,7 @@ properties:
>        2: single cpu mode
>  
>  patternProperties:
> -  "^r5f-[a-f0-9]+$":
> +  "^r5f@[0-9a-f]+$":
>      type: object
>      description: |
>        The RPU is located in the Low Power Domain of the Processor Subsystem.
> @@ -54,9 +66,6 @@ patternProperties:
>        compatible:
>          const: xlnx,zynqmp-r5f
>  
> -      power-domains:
> -        maxItems: 1

Why power-domains are being dropped? This should have widest constraints
if you later customize it.

> -
>        mboxes:
>          minItems: 1
>          items:
> @@ -101,35 +110,174 @@ patternProperties:
>  
>      required:
>        - compatible
> -      - power-domains

Don't drop power domains.


>  
> -    unevaluatedProperties: false
> +allOf:

allOf block goes after required:

> +  - if:
> +      properties:
> +        xlnx,cluster-mode:
> +          enum:
> +            - 1
> +    then:
> +      patternProperties:
> +        "^r5f@[0-9a-f]+$":
> +          type: object
> +
> +          properties:
> +            reg:

reg is missing in your patternProperties earlier.



Best regards,
Krzysztof
Shah, Tanmay Feb. 29, 2024, 11:45 p.m. UTC | #3
Thanks for reviews.

Ack to all comments, I will address in next revision.


Tanmay

On 2/29/24 3:59 AM, Krzysztof Kozlowski wrote:
> On 19/02/2024 18:44, Tanmay Shah wrote:
> > From: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
> > 
> > Introduce bindings for TCM memory address space on AMD-xilinx Zynq
> > UltraScale+ platform. It will help in defining TCM in device-tree
> > and make it's access platform agnostic and data-driven.
> > 
> > Tightly-coupled memories(TCMs) are low-latency memory that provides
> > predictable instruction execution and predictable data load/store
> > timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
> > banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
> > 
> > The TCM resources(reg, reg-names and power-domain) are documented for
> > each TCM in the R5 node. The reg and reg-names are made as required
> > properties as we don't want to hardcode TCM addresses for future
> > platforms and for zu+ legacy implementation will ensure that the
> > old dts w/o reg/reg-names works and stable ABI is maintained.
> > 
> > It also extends the examples for TCM split and lockstep modes.
> > 
> > Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
> > Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
> > ---
> > 
> > Changes in v11:
> >   - Fix yamllint warning and reduce indentation as needed
> > 
> >  .../remoteproc/xlnx,zynqmp-r5fss.yaml         | 192 ++++++++++++++++--
> >  1 file changed, 170 insertions(+), 22 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> > index 78aac69f1060..77030edf41fa 100644
> > --- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> > +++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
> > @@ -20,9 +20,21 @@ properties:
> >    compatible:
> >      const: xlnx,zynqmp-r5fss
> >  
> > +  "#address-cells":
> > +    const: 2
> > +
> > +  "#size-cells":
> > +    const: 2
> > +
> > +  ranges:
> > +    description: |
> > +      Standard ranges definition providing address translations for
> > +      local R5F TCM address spaces to bus addresses.
> > +
> >    xlnx,cluster-mode:
> >      $ref: /schemas/types.yaml#/definitions/uint32
> >      enum: [0, 1, 2]
> > +    default: 1
> >      description: |
> >        The RPU MPCore can operate in split mode (Dual-processor performance), Safety
> >        lock-step mode(Both RPU cores execute the same code in lock-step,
> > @@ -37,7 +49,7 @@ properties:
> >        2: single cpu mode
> >  
> >  patternProperties:
> > -  "^r5f-[a-f0-9]+$":
> > +  "^r5f@[0-9a-f]+$":
> >      type: object
> >      description: |
> >        The RPU is located in the Low Power Domain of the Processor Subsystem.
> > @@ -54,9 +66,6 @@ patternProperties:
> >        compatible:
> >          const: xlnx,zynqmp-r5f
> >  
> > -      power-domains:
> > -        maxItems: 1
>
> Why power-domains are being dropped? This should have widest constraints
> if you later customize it.
>
> > -
> >        mboxes:
> >          minItems: 1
> >          items:
> > @@ -101,35 +110,174 @@ patternProperties:
> >  
> >      required:
> >        - compatible
> > -      - power-domains
>
> Don't drop power domains.
>
>
> >  
> > -    unevaluatedProperties: false
> > +allOf:
>
> allOf block goes after required:
>
> > +  - if:
> > +      properties:
> > +        xlnx,cluster-mode:
> > +          enum:
> > +            - 1
> > +    then:
> > +      patternProperties:
> > +        "^r5f@[0-9a-f]+$":
> > +          type: object
> > +
> > +          properties:
> > +            reg:
>
> reg is missing in your patternProperties earlier.
>
>
>
> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
index 78aac69f1060..77030edf41fa 100644
--- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
@@ -20,9 +20,21 @@  properties:
   compatible:
     const: xlnx,zynqmp-r5fss
 
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges:
+    description: |
+      Standard ranges definition providing address translations for
+      local R5F TCM address spaces to bus addresses.
+
   xlnx,cluster-mode:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 2]
+    default: 1
     description: |
       The RPU MPCore can operate in split mode (Dual-processor performance), Safety
       lock-step mode(Both RPU cores execute the same code in lock-step,
@@ -37,7 +49,7 @@  properties:
       2: single cpu mode
 
 patternProperties:
-  "^r5f-[a-f0-9]+$":
+  "^r5f@[0-9a-f]+$":
     type: object
     description: |
       The RPU is located in the Low Power Domain of the Processor Subsystem.
@@ -54,9 +66,6 @@  patternProperties:
       compatible:
         const: xlnx,zynqmp-r5f
 
-      power-domains:
-        maxItems: 1
-
       mboxes:
         minItems: 1
         items:
@@ -101,35 +110,174 @@  patternProperties:
 
     required:
       - compatible
-      - power-domains
 
-    unevaluatedProperties: false
+allOf:
+  - if:
+      properties:
+        xlnx,cluster-mode:
+          enum:
+            - 1
+    then:
+      patternProperties:
+        "^r5f@[0-9a-f]+$":
+          type: object
+
+          properties:
+            reg:
+              minItems: 1
+              items:
+                - description: ATCM internal memory
+                - description: BTCM internal memory
+                - description: extra ATCM memory in lockstep mode
+                - description: extra BTCM memory in lockstep mode
+
+            reg-names:
+              minItems: 1
+              items:
+                - const: atcm0
+                - const: btcm0
+                - const: atcm1
+                - const: btcm1
+
+            power-domains:
+              minItems: 2
+              maxItems: 5
+
+          required:
+            - reg
+            - reg-names
+            - power-domains
+
+    else:
+      patternProperties:
+        "^r5f@[0-9a-f]+$":
+          type: object
+
+          properties:
+            reg:
+              minItems: 1
+              items:
+                - description: ATCM internal memory
+                - description: BTCM internal memory
+
+            reg-names:
+              minItems: 1
+              items:
+                - const: atcm0
+                - const: btcm0
+
+            power-domains:
+              minItems: 2
+              maxItems: 3
+
+          required:
+            - reg
+            - reg-names
+            - power-domains
 
 required:
   - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
 
 additionalProperties: false
 
 examples:
   - |
-    remoteproc {
-        compatible = "xlnx,zynqmp-r5fss";
-        xlnx,cluster-mode = <1>;
-
-        r5f-0 {
-            compatible = "xlnx,zynqmp-r5f";
-            power-domains = <&zynqmp_firmware 0x7>;
-            memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
-            mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
-            mbox-names = "tx", "rx";
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+
+    // Split mode configuration
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        remoteproc@ffe00000 {
+            compatible = "xlnx,zynqmp-r5fss";
+            xlnx,cluster-mode = <0>;
+
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+                     <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+                     <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+                     <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+            r5f@0 {
+                compatible = "xlnx,zynqmp-r5f";
+                reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+                reg-names = "atcm0", "btcm0";
+                power-domains = <&zynqmp_firmware PD_RPU_0>,
+                                <&zynqmp_firmware PD_R5_0_ATCM>,
+                                <&zynqmp_firmware PD_R5_0_BTCM>;
+                memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+                                <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+                mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+                mbox-names = "tx", "rx";
+            };
+
+            r5f@1 {
+                compatible = "xlnx,zynqmp-r5f";
+                reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+                reg-names = "atcm0", "btcm0";
+                power-domains = <&zynqmp_firmware PD_RPU_1>,
+                                <&zynqmp_firmware PD_R5_1_ATCM>,
+                                <&zynqmp_firmware PD_R5_1_BTCM>;
+                memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+                                <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+                mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+                mbox-names = "tx", "rx";
+            };
         };
+    };
+
+  - |
+    //Lockstep configuration
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        remoteproc@ffe00000 {
+            compatible = "xlnx,zynqmp-r5fss";
+            xlnx,cluster-mode = <1>;
+
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+                     <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+                     <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
+                     <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
+
+            r5f@0 {
+                compatible = "xlnx,zynqmp-r5f";
+                reg = <0x0 0x0 0x0 0x10000>,
+                      <0x0 0x20000 0x0 0x10000>,
+                      <0x0 0x10000 0x0 0x10000>,
+                      <0x0 0x30000 0x0 0x10000>;
+                reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
+                power-domains = <&zynqmp_firmware PD_RPU_0>,
+                                <&zynqmp_firmware PD_R5_0_ATCM>,
+                                <&zynqmp_firmware PD_R5_0_BTCM>,
+                                <&zynqmp_firmware PD_R5_1_ATCM>,
+                                <&zynqmp_firmware PD_R5_1_BTCM>;
+                memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+                                <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+                mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+                mbox-names = "tx", "rx";
+            };
 
-        r5f-1 {
-            compatible = "xlnx,zynqmp-r5f";
-            power-domains = <&zynqmp_firmware 0x8>;
-            memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
-            mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
-            mbox-names = "tx", "rx";
+            r5f@1 {
+                compatible = "xlnx,zynqmp-r5f";
+                reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+                reg-names = "atcm0", "btcm0";
+                power-domains = <&zynqmp_firmware PD_RPU_1>,
+                                <&zynqmp_firmware PD_R5_1_ATCM>,
+                                <&zynqmp_firmware PD_R5_1_BTCM>;
+                memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+                                <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+                mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+                mbox-names = "tx", "rx";
+            };
         };
     };
 ...