@@ -23391,6 +23391,12 @@ S: Maintained
F: include/uapi/linux/virtio_snd.h
F: sound/virtio/*
+VIRTIO SPI DRIVER
+M: Harald Mommer <harald.mommer@opensynergy.com>
+S: Maintained
+F: include/uapi/linux/virtio_spi.h
+F: drivers/spi/spi-virtio.c
+
VIRTUAL BOX GUEST DEVICE DRIVER
M: Hans de Goede <hdegoede@redhat.com>
M: Arnd Bergmann <arnd@arndb.de>
@@ -1125,6 +1125,17 @@ config SPI_UNIPHIER
If your SoC supports SCSSI, say Y here.
+config SPI_VIRTIO
+ tristate "Virtio SPI Controller"
+ depends on SPI_MASTER && VIRTIO
+ help
+ This enables the Virtio SPI driver.
+
+ Virtio SPI is an SPI driver for virtual machines using Virtio.
+
+ If your Linux is a virtual machine using Virtio, say Y here.
+ If unsure, say N.
+
config SPI_XCOMM
tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
depends on I2C
@@ -146,6 +146,7 @@ spi-thunderx-objs := spi-cavium.o spi-cavium-thunderx.o
obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
obj-$(CONFIG_SPI_UNIPHIER) += spi-uniphier.o
+obj-$(CONFIG_SPI_VIRTIO) += spi-virtio.o
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
obj-$(CONFIG_SPI_XLP) += spi-xlp.o
new file mode 100644
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SPI bus driver for the Virtio SPI controller
+ * Copyright (C) 2023 OpenSynergy GmbH
+ */
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/stddef.h>
+#include <linux/virtio.h>
+#include <linux/virtio_ring.h>
+#include <linux/virtio_spi.h>
+
+struct virtio_spi_req {
+ struct completion completion;
+ struct spi_transfer_head transfer_head ____cacheline_aligned;
+ const uint8_t *tx_buf ____cacheline_aligned;
+ uint8_t *rx_buf ____cacheline_aligned;
+ struct spi_transfer_result result ____cacheline_aligned;
+};
+
+/* virtio_spi private data structure */
+struct virtio_spi_priv {
+ /* Virtio SPI message */
+ struct virtio_spi_req spi_req;
+ /* The virtio device we're associated with */
+ struct virtio_device *vdev;
+ /* Pointer to the virtqueue */
+ struct virtqueue *vq;
+ /* Copy of config space mode_func_supported */
+ u32 mode_func_supported;
+ /* Copy of config space max_freq_hz */
+ u32 max_freq_hz;
+};
+
+static struct spi_board_info board_info = {
+ .modalias = "spi-virtio",
+};
+
+static void virtio_spi_msg_done(struct virtqueue *vq)
+{
+ struct virtio_spi_req *req;
+ unsigned int len;
+
+ while ((req = virtqueue_get_buf(vq, &len)))
+ complete(&req->completion);
+}
+
+/*
+ * . . . . . . . . . .
+ * Delay + A + + B + + C + D + E + F + A +
+ * . . . . . . . . . .
+ * ___. . . . . . .___.___. .
+ * CS# |___.______.____.____.___.___| . |___._____________
+ * . . . . . . . . . .
+ * . . . . . . . . . .
+ * SCLK__.___.___NNN_____NNN__.___.___.___.___.___.___NNN_______
+ *
+ * NOTE: 1st transfer has two words, the delay between these two words are
+ * 'B' in the diagram.
+ *
+ * A => struct spi_device -> cs_setup
+ * B => max{struct spi_transfer -> word_delay, struct spi_device -> word_delay}
+ * Note: spi_device and spi_transfer both have word_delay, Linux
+ * choose the bigger one, refer to _spi_xfer_word_delay_update function
+ * C => struct spi_transfer -> delay
+ * D => struct spi_device -> cs_hold
+ * E => struct spi_device -> cs_inactive
+ * F => struct spi_transfer -> cs_change_delay
+ *
+ * So the corresponding relationship:
+ * A <===> cs_setup_ns (after CS asserted)
+ * B <===> word_delay_ns (no matter with CS)
+ * C+D <===> cs_delay_hold_ns (before CS deasserted)
+ * E+F <===> cs_change_delay_inactive_ns (after CS deasserted, these two
+ * values are also recommended in the Linux driver to be added up)
+ */
+static int virtio_spi_set_delays(struct spi_transfer_head *th,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ int cs_setup;
+ int cs_word_delay_xfer;
+ int cs_word_delay_spi;
+ int delay;
+ int cs_hold;
+ int cs_inactive;
+ int cs_change_delay;
+
+ cs_setup = spi_delay_to_ns(&spi->cs_setup, xfer);
+ if (cs_setup < 0) {
+ dev_warn(&spi->dev, "Cannot convert cs_setup\n");
+ return cs_setup;
+ }
+ th->cs_setup_ns = cpu_to_le32((u32)cs_setup);
+
+ cs_word_delay_xfer = spi_delay_to_ns(&xfer->word_delay, xfer);
+ if (cs_word_delay_xfer < 0) {
+ dev_warn(&spi->dev, "Cannot convert cs_word_delay_xfer\n");
+ return cs_word_delay_xfer;
+ }
+ cs_word_delay_spi = spi_delay_to_ns(&spi->word_delay, xfer);
+ if (cs_word_delay_spi < 0) {
+ dev_warn(&spi->dev, "Cannot convert cs_word_delay_spi\n");
+ return cs_word_delay_spi;
+ }
+ if (cs_word_delay_spi > cs_word_delay_xfer)
+ th->word_delay_ns = cpu_to_le32((u32)cs_word_delay_spi);
+ else
+ th->word_delay_ns = cpu_to_le32((u32)cs_word_delay_xfer);
+
+ delay = spi_delay_to_ns(&xfer->delay, xfer);
+ if (delay < 0) {
+ dev_warn(&spi->dev, "Cannot convert delay\n");
+ return delay;
+ }
+ cs_hold = spi_delay_to_ns(&spi->cs_hold, xfer);
+ if (cs_hold < 0) {
+ dev_warn(&spi->dev, "Cannot convert cs_hold\n");
+ return cs_hold;
+ }
+ th->cs_delay_hold_ns = cpu_to_le32((u32)delay + (u32)cs_hold);
+
+ cs_inactive = spi_delay_to_ns(&spi->cs_inactive, xfer);
+ if (cs_inactive < 0) {
+ dev_warn(&spi->dev, "Cannot convert cs_inactive\n");
+ return cs_inactive;
+ }
+ cs_change_delay = spi_delay_to_ns(&xfer->cs_change_delay, xfer);
+ if (cs_change_delay < 0) {
+ dev_warn(&spi->dev, "Cannot convert cs_change_delay\n");
+ return cs_change_delay;
+ }
+ th->cs_change_delay_inactive_ns =
+ cpu_to_le32((u32)cs_inactive + (u32)cs_change_delay);
+
+ return 0;
+}
+
+static int virtio_spi_transfer_one(struct spi_controller *ctrl,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct virtio_spi_priv *priv = spi_controller_get_devdata(ctrl);
+ struct virtio_spi_req *spi_req = &priv->spi_req;
+ struct spi_transfer_head *th;
+ struct scatterlist sg_out_head, sg_out_payload;
+ struct scatterlist sg_in_result, sg_in_payload;
+ struct scatterlist *sgs[4];
+ unsigned int outcnt = 0u;
+ unsigned int incnt = 0u;
+ int ret;
+
+ th = &spi_req->transfer_head;
+
+ /* Fill struct spi_transfer_head */
+ th->chip_select_id = spi_get_chipselect(spi, 0);
+ th->bits_per_word = spi->bits_per_word;
+ th->cs_change = xfer->cs_change;
+ th->tx_nbits = xfer->tx_nbits;
+ th->rx_nbits = xfer->rx_nbits;
+ th->reserved[0] = 0;
+ th->reserved[1] = 0;
+ th->reserved[2] = 0;
+
+ BUILD_BUG_ON(VIRTIO_SPI_CPHA != SPI_CPHA);
+ BUILD_BUG_ON(VIRTIO_SPI_CPOL != SPI_CPOL);
+ BUILD_BUG_ON(VIRTIO_SPI_CS_HIGH != SPI_CS_HIGH);
+ BUILD_BUG_ON(VIRTIO_SPI_MODE_LSB_FIRST != SPI_LSB_FIRST);
+
+ th->mode = cpu_to_le32(spi->mode & (SPI_LSB_FIRST | SPI_CS_HIGH |
+ SPI_CPOL | SPI_CPHA));
+ if ((spi->mode & SPI_LOOP) != 0)
+ th->mode |= cpu_to_le32(VIRTIO_SPI_MODE_LOOP);
+
+ th->freq = cpu_to_le32(xfer->speed_hz);
+
+ ret = virtio_spi_set_delays(th, spi, xfer);
+ if (ret)
+ goto msg_done;
+
+ /* Set buffers */
+ spi_req->tx_buf = xfer->tx_buf;
+ spi_req->rx_buf = xfer->rx_buf;
+
+ /* Prepare sending of virtio message */
+ reinit_completion(&spi_req->completion);
+
+ sg_init_one(&sg_out_head, th, sizeof(*th));
+ sgs[outcnt] = &sg_out_head;
+ outcnt++;
+
+ if (spi_req->tx_buf) {
+ sg_init_one(&sg_out_payload, spi_req->tx_buf, xfer->len);
+ sgs[outcnt] = &sg_out_payload;
+ outcnt++;
+ }
+
+ if (spi_req->rx_buf) {
+ sg_init_one(&sg_in_payload, spi_req->rx_buf, xfer->len);
+ sgs[outcnt] = &sg_in_payload;
+ incnt++;
+ }
+
+ sg_init_one(&sg_in_result, &spi_req->result,
+ sizeof(struct spi_transfer_result));
+ sgs[outcnt + incnt] = &sg_in_result;
+ incnt++;
+
+ ret = virtqueue_add_sgs(priv->vq, sgs, outcnt, incnt, spi_req,
+ GFP_KERNEL);
+ if (ret)
+ goto msg_done;
+
+ /* Simple implementation: There can be only one transfer in flight */
+ virtqueue_kick(priv->vq);
+
+ wait_for_completion(&priv->spi_req.completion);
+
+ /* Read result from message and translate return code */
+ switch (priv->spi_req.result.result) {
+ case VIRTIO_SPI_TRANS_OK:
+ /* ret is 0 */
+ break;
+ case VIRTIO_SPI_PARAM_ERR:
+ ret = -EINVAL;
+ break;
+ case VIRTIO_SPI_TRANS_ERR:
+ ret = -EIO;
+ break;
+ default: /* Protocol violation */
+ ret = -EIO;
+ break;
+ }
+
+msg_done:
+ if (ret)
+ ctrl->cur_msg->status = ret;
+
+ return ret;
+}
+
+static void virtio_spi_read_config(struct virtio_device *vdev)
+{
+ struct spi_controller *ctrl = dev_get_drvdata(&vdev->dev);
+ struct virtio_spi_priv *priv = vdev->priv;
+ u8 cs_max_number;
+ u8 tx_nbits_supported;
+ u8 rx_nbits_supported;
+
+ cs_max_number = virtio_cread8(vdev, offsetof(struct virtio_spi_config,
+ cs_max_number));
+ ctrl->num_chipselect = cs_max_number;
+
+ /* Set the mode bits which are understood by this driver */
+ priv->mode_func_supported =
+ virtio_cread32(vdev, offsetof(struct virtio_spi_config,
+ mode_func_supported));
+ ctrl->mode_bits = priv->mode_func_supported &
+ (VIRTIO_SPI_CS_HIGH | VIRTIO_SPI_MODE_LSB_FIRST);
+ if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_CPHA_1) != 0)
+ ctrl->mode_bits |= VIRTIO_SPI_CPHA;
+ if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_CPOL_1) != 0)
+ ctrl->mode_bits |= VIRTIO_SPI_CPOL;
+ if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_LSB_FIRST) != 0)
+ ctrl->mode_bits |= SPI_LSB_FIRST;
+ if ((priv->mode_func_supported & VIRTIO_SPI_MF_SUPPORT_LOOPBACK) != 0)
+ ctrl->mode_bits |= SPI_LOOP;
+ tx_nbits_supported =
+ virtio_cread8(vdev, offsetof(struct virtio_spi_config,
+ tx_nbits_supported));
+ if ((tx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_DUAL) != 0)
+ ctrl->mode_bits |= SPI_TX_DUAL;
+ if ((tx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_QUAD) != 0)
+ ctrl->mode_bits |= SPI_TX_QUAD;
+ if ((tx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_OCTAL) != 0)
+ ctrl->mode_bits |= SPI_TX_OCTAL;
+ rx_nbits_supported =
+ virtio_cread8(vdev, offsetof(struct virtio_spi_config,
+ rx_nbits_supported));
+ if ((rx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_DUAL) != 0)
+ ctrl->mode_bits |= SPI_RX_DUAL;
+ if ((rx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_QUAD) != 0)
+ ctrl->mode_bits |= SPI_RX_QUAD;
+ if ((rx_nbits_supported & VIRTIO_SPI_RX_TX_SUPPORT_OCTAL) != 0)
+ ctrl->mode_bits |= SPI_RX_OCTAL;
+
+ ctrl->bits_per_word_mask =
+ virtio_cread32(vdev, offsetof(struct virtio_spi_config,
+ bits_per_word_mask));
+
+ priv->max_freq_hz =
+ virtio_cread32(vdev, offsetof(struct virtio_spi_config,
+ max_freq_hz));
+}
+
+static int virtio_spi_find_vqs(struct virtio_spi_priv *priv)
+{
+ struct virtqueue *vq;
+
+ vq = virtio_find_single_vq(priv->vdev, virtio_spi_msg_done, "spi-rq");
+ if (IS_ERR(vq))
+ return (int)PTR_ERR(vq);
+ priv->vq = vq;
+ return 0;
+}
+
+/* Function must not be called before virtio_spi_find_vqs() has been run */
+static void virtio_spi_del_vq(struct virtio_device *vdev)
+{
+ virtio_reset_device(vdev);
+ vdev->config->del_vqs(vdev);
+}
+
+static int virtio_spi_validate(struct virtio_device *vdev)
+{
+ /*
+ * SPI needs always access to the config space.
+ * Check that the driver can access the config space
+ */
+ if (!vdev->config->get) {
+ dev_err(&vdev->dev, "%s failure: config access disabled\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1)) {
+ dev_err(&vdev->dev,
+ "device does not comply with spec version 1.x\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int virtio_spi_probe(struct virtio_device *vdev)
+{
+ struct device_node *np = vdev->dev.parent->of_node;
+ struct virtio_spi_priv *priv;
+ struct spi_controller *ctrl;
+ int err;
+ u32 bus_num;
+ u16 csi;
+
+ ctrl = devm_spi_alloc_host(&vdev->dev, sizeof(*priv));
+ if (!ctrl) {
+ dev_err(&vdev->dev, "Kernel memory exhausted in %s()\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ priv = spi_controller_get_devdata(ctrl);
+ priv->vdev = vdev;
+ vdev->priv = priv;
+ dev_set_drvdata(&vdev->dev, ctrl);
+
+ init_completion(&priv->spi_req.completion);
+
+ err = of_property_read_u32(np, "spi,bus-num", &bus_num);
+ if (!err && bus_num <= S16_MAX)
+ ctrl->bus_num = (s16)bus_num;
+
+ virtio_spi_read_config(vdev);
+
+ /* Method to do a single SPI transfer */
+ ctrl->transfer_one = virtio_spi_transfer_one;
+
+ /* Initialize virtqueues */
+ err = virtio_spi_find_vqs(priv);
+ if (err) {
+ dev_err(&vdev->dev, "Cannot setup virtqueues\n");
+ return err;
+ }
+
+ err = spi_register_controller(ctrl);
+ if (err) {
+ dev_err(&vdev->dev, "Cannot register controller\n");
+ goto err_return;
+ }
+
+ board_info.max_speed_hz = priv->max_freq_hz;
+ /* spi_new_device() currently does not use bus_num but better set it */
+ board_info.bus_num = (u16)ctrl->bus_num;
+
+ /* Add chip selects to controller */
+ for (csi = 0; csi < ctrl->num_chipselect; csi++) {
+ dev_dbg(&vdev->dev, "Setting up CS=%u\n", csi);
+ board_info.chip_select = csi;
+ /* TODO: Discuss setting of board_info.mode */
+ if (!(priv->mode_func_supported & VIRTIO_SPI_CS_HIGH))
+ board_info.mode = SPI_MODE_0;
+ else
+ board_info.mode = SPI_MODE_0 | SPI_CS_HIGH;
+ if (!spi_new_device(ctrl, &board_info)) {
+ dev_err(&vdev->dev, "Cannot setup device %u\n", csi);
+ spi_unregister_controller(ctrl);
+ err = -ENODEV;
+ goto err_return;
+ }
+ }
+
+ return 0;
+
+err_return:
+ vdev->config->del_vqs(vdev);
+ return err;
+}
+
+static void virtio_spi_remove(struct virtio_device *vdev)
+{
+ struct spi_controller *ctrl = dev_get_drvdata(&vdev->dev);
+
+ /* Order: 1.) unregister controller, 2.) remove virtqueue */
+ spi_unregister_controller(ctrl);
+ virtio_spi_del_vq(vdev);
+}
+
+static int virtio_spi_freeze(struct virtio_device *vdev)
+{
+ struct device *dev = &vdev->dev;
+ struct spi_controller *ctrl = dev_get_drvdata(dev);
+ int ret;
+
+ /* Stop the queue running */
+ ret = spi_controller_suspend(ctrl);
+ if (ret) {
+ dev_warn(dev, "cannot suspend controller (%d)\n", ret);
+ return ret;
+ }
+
+ virtio_spi_del_vq(vdev);
+ return 0;
+}
+
+static int virtio_spi_restore(struct virtio_device *vdev)
+{
+ struct device *dev = &vdev->dev;
+ struct spi_controller *ctrl = dev_get_drvdata(dev);
+ int ret;
+
+ ret = virtio_spi_find_vqs(vdev->priv);
+ if (ret) {
+ dev_err(dev, "problem starting vqueue (%d)\n", ret);
+ return ret;
+ }
+
+ ret = spi_controller_resume(ctrl);
+ if (ret)
+ dev_err(dev, "problem resuming controller (%d)\n", ret);
+
+ return ret;
+}
+
+static struct virtio_device_id virtio_spi_id_table[] = {
+ { VIRTIO_ID_SPI, VIRTIO_DEV_ANY_ID },
+ { 0 },
+};
+
+static struct virtio_driver virtio_spi_driver = {
+ .driver.name = KBUILD_MODNAME,
+ .driver.owner = THIS_MODULE,
+ .id_table = virtio_spi_id_table,
+ .validate = virtio_spi_validate,
+ .probe = virtio_spi_probe,
+ .remove = virtio_spi_remove,
+ .freeze = pm_sleep_ptr(virtio_spi_freeze),
+ .restore = pm_sleep_ptr(virtio_spi_restore),
+};
+
+module_virtio_driver(virtio_spi_driver);
+MODULE_DEVICE_TABLE(virtio, virtio_spi_id_table);
+
+MODULE_AUTHOR("OpenSynergy GmbH");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Virtio SPI bus driver");