| Message ID | 20240127152853.65937-1-dario.binacchi@amarulasolutions.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add display support for stm32f769-disco board | expand |
Hi Dario On 1/27/24 16:28, Dario Binacchi wrote: > The series adds display support for the stm32f769-disco board. It has been > tested on hardware revisions MB1225-B03 and MB1166-A09. This required > modifications to the nt35510 driver that have already been applied. > > Changes in v10: > - Drop backlight. From a closer analysis of the schematics > en.MB1225-F769I-B01_Schematic.pdf and en.mb1166-default-a09-schematic.pdf, > it is noticed that the GPIO I14 is connected to an unmounted > resistor (n/a), making the backlight functionality via GPIO unusable. > - Drop backlight references > > Changes in v9: > - Drop 'interrupts' property to fix yaml checks > - Rename vcc_3v3 to to vcc-3v3 > - Rename panel-dsi@0 to panel@0 to fix yaml warnings > - Change commit message > - Rename stm32f769-disco-mb1225-revb03-mb1166-reva09 to > stm32f769-disco-mb1166-reva09 > > Changes in v8: > - Add Acked-by tag of Lee Jones > - Add Reviewed-by tag of Raphael Gallais-Pou > - Add Reviewed-by tag of Raphael Gallais-Pou > - Remove unit name from 'ltdc/port/endpoint@0' to fix the compiling > warning: > ../arch/arm/boot/dts/st/stm32f769-disco.dts:189.28-191.5: Warning > (unit_address_vs_reg): /soc/display-controller@40016800/port/endpoint@0: node > has a unit name, but no reg or ranges property > - Add Reviewed-by tag of Linus Walleij > - Add Reviewed-by tag of Raphael Gallais-Pou > > Changes in v7: > - Replace .dts with .dtb in the Makefile > > Changes in v6: > - Drop patches > - [5/8] dt-bindings: nt35510: add compatible for FRIDA FRD400B25025-A-CTK > - [7/8] drm/panel: nt35510: move hardwired parameters to configuration > - [8/8] drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK > because applied by the maintainer Linus Walleij > > Changes in v5: > - Replace GPIOD_ASIS with GPIOD_OUT_HIGH in the call to devm_gpiod_get_optional(). > > Changes in v2: > - Add Acked-by tag of Conor Dooley > - Change the status of panel_backlight node to "disabled" > - Delete backlight property from panel0 node. > - Re-write the patch [8/8] "drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK" > in the same style as the original driver. > > Dario Binacchi (5): > dt-bindings: mfd: stm32f7: Add binding definition for DSI > ARM: dts: stm32: add DSI support on stm32f769 > ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco > ARM: dts: stm32: add display support on stm32f769-disco > ARM: dts: add stm32f769-disco-mb1166-reva09 > > arch/arm/boot/dts/st/Makefile | 1 + > .../dts/st/stm32f769-disco-mb1166-reva09.dts | 13 ++++ > arch/arm/boot/dts/st/stm32f769-disco.dts | 70 +++++++++++++++++-- > arch/arm/boot/dts/st/stm32f769.dtsi | 20 ++++++ > include/dt-bindings/mfd/stm32f7-rcc.h | 1 + > 5 files changed, 101 insertions(+), 4 deletions(-) > create mode 100644 arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts > create mode 100644 arch/arm/boot/dts/st/stm32f769.dtsi > Series applied on stm32-next. Thanks for your efforts. Alex