@@ -64,6 +64,15 @@
#define RTL822X_VND1_SERDES_CTRL3_MODE_SGMII 0x02
#define RTL822X_VND1_SERDES_CTRL3_MODE_2500BASEX 0x16
+/* RTL822X_VND2_XXXXX registers are only accessible when phydev->is_c45
+ * is set, they cannot be accessed by C45-over-C22.
+ */
+#define RTL822X_VND2_GBCR 0xa412
+
+#define RTL822X_VND2_GANLPAR 0xa414
+
+#define RTL822X_VND2_PHYSR 0xa434
+
#define RTL8366RB_POWER_SAVE 0x15
#define RTL8366RB_POWER_SAVE_ON BIT(12)
@@ -74,6 +83,9 @@
#define RTL_GENERIC_PHYID 0x001cc800
#define RTL_8211FVD_PHYID 0x001cc878
+#define RTL_8221B_VB_CG 0x001cc849
+#define RTL_8221B_VN_CG 0x001cc84a
+#define RTL_8251B 0x001cc862
MODULE_DESCRIPTION("Realtek PHY driver");
MODULE_AUTHOR("Johnson Leung");
@@ -821,6 +833,76 @@ static int rtl822x_read_status(struct phy_device *phydev)
return 0;
}
+static int rtl822x_c45_get_features(struct phy_device *phydev)
+{
+ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT,
+ phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT,
+ phydev->supported);
+
+ return genphy_c45_pma_read_abilities(phydev);
+}
+
+static int rtl822x_c45_config_aneg(struct phy_device *phydev)
+{
+ bool changed = false;
+ int ret, val;
+
+ if (phydev->autoneg == AUTONEG_DISABLE)
+ return genphy_c45_pma_setup_forced(phydev);
+
+ ret = genphy_c45_an_config_aneg(phydev);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ val = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
+
+ /* Vendor register as C45 has no standardized support for 1000BaseT */
+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2, RTL822X_VND2_GBCR,
+ ADVERTISE_1000FULL, val);
+ if (ret < 0)
+ return ret;
+ if (ret > 0)
+ changed = true;
+
+ return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
+static int rtl822x_c45_read_status(struct phy_device *phydev)
+{
+ int ret, val;
+
+ ret = genphy_c45_read_status(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Vendor register as C45 has no standardized support for 1000BaseT */
+ if (phydev->autoneg == AUTONEG_ENABLE) {
+ val = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+ RTL822X_VND2_GANLPAR);
+ if (val < 0)
+ return val;
+
+ mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, val);
+ }
+
+ if (!phydev->link)
+ return 0;
+
+ /* Read actual speed from vendor register. */
+ val = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL822X_VND2_PHYSR);
+ if (val < 0)
+ return val;
+
+ rtlgen_get_speed(phydev, val);
+
+ rtl822x_update_interface(phydev);
+
+ return 0;
+}
+
static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
{
int val;
@@ -844,6 +926,44 @@ static int rtl8226_match_phy_device(struct phy_device *phydev)
rtlgen_supports_2_5gbps(phydev);
}
+static int rtlgen_is_c45_match(struct phy_device *phydev, unsigned int id, bool is_c45)
+{
+ if (phydev->is_c45)
+ return is_c45 && (id == phydev->c45_ids.device_ids[1]);
+ else
+ return !is_c45 && (id == phydev->phy_id);
+}
+
+static int rtl8221b_vb_cg_c22_match_phy_device(struct phy_device *phydev)
+{
+ return rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, false);
+}
+
+static int rtl8221b_vb_cg_c45_match_phy_device(struct phy_device *phydev)
+{
+ return rtlgen_is_c45_match(phydev, RTL_8221B_VB_CG, true);
+}
+
+static int rtl8221b_vn_cg_c22_match_phy_device(struct phy_device *phydev)
+{
+ return rtlgen_is_c45_match(phydev, RTL_8221B_VN_CG, false);
+}
+
+static int rtl8221b_vn_cg_c45_match_phy_device(struct phy_device *phydev)
+{
+ return rtlgen_is_c45_match(phydev, RTL_8221B_VN_CG, true);
+}
+
+static int rtl8251b_c22_match_phy_device(struct phy_device *phydev)
+{
+ return rtlgen_is_c45_match(phydev, RTL_8251B, false);
+}
+
+static int rtl8251b_c45_match_phy_device(struct phy_device *phydev)
+{
+ return rtlgen_is_c45_match(phydev, RTL_8251B, true);
+}
+
static int rtlgen_resume(struct phy_device *phydev)
{
int ret = genphy_resume(phydev);
@@ -854,6 +974,15 @@ static int rtlgen_resume(struct phy_device *phydev)
return ret;
}
+static int rtlgen_c45_resume(struct phy_device *phydev)
+{
+ int ret = genphy_c45_pma_resume(phydev);
+
+ msleep(20);
+
+ return ret;
+}
+
static int rtl9000a_config_init(struct phy_device *phydev)
{
phydev->autoneg = AUTONEG_DISABLE;
@@ -1129,8 +1258,8 @@ static struct phy_driver realtek_drvs[] = {
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
- PHY_ID_MATCH_EXACT(0x001cc849),
- .name = "RTL8221B-VB-CG 2.5Gbps PHY",
+ .match_phy_device = rtl8221b_vb_cg_c22_match_phy_device,
+ .name = "RTL8221B-VB-CG 2.5Gbps PHY (C22)",
.get_features = rtl822x_get_features,
.config_init = rtl822x_config_init,
.get_rate_matching = rtl822x_get_rate_matching,
@@ -1141,8 +1270,18 @@ static struct phy_driver realtek_drvs[] = {
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
- PHY_ID_MATCH_EXACT(0x001cc84a),
- .name = "RTL8221B-VM-CG 2.5Gbps PHY",
+ .match_phy_device = rtl8221b_vb_cg_c45_match_phy_device,
+ .name = "RTL8221B-VB-CG 2.5Gbps PHY (C45)",
+ .config_init = rtl822x_config_init,
+ .get_rate_matching = rtl822x_get_rate_matching,
+ .get_features = rtl822x_c45_get_features,
+ .config_aneg = rtl822x_c45_config_aneg,
+ .read_status = rtl822x_c45_read_status,
+ .suspend = genphy_c45_pma_suspend,
+ .resume = rtlgen_c45_resume,
+ }, {
+ .match_phy_device = rtl8221b_vn_cg_c22_match_phy_device,
+ .name = "RTL8221B-VM-CG 2.5Gbps PHY (C22)",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.config_init = rtl822x_config_init,
@@ -1153,8 +1292,18 @@ static struct phy_driver realtek_drvs[] = {
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
- PHY_ID_MATCH_EXACT(0x001cc862),
- .name = "RTL8251B 5Gbps PHY",
+ .match_phy_device = rtl8221b_vn_cg_c45_match_phy_device,
+ .name = "RTL8221B-VN-CG 2.5Gbps PHY (C45)",
+ .config_init = rtl822x_config_init,
+ .get_rate_matching = rtl822x_get_rate_matching,
+ .get_features = rtl822x_c45_get_features,
+ .config_aneg = rtl822x_c45_config_aneg,
+ .read_status = rtl822x_c45_read_status,
+ .suspend = genphy_c45_pma_suspend,
+ .resume = rtlgen_c45_resume,
+ }, {
+ .match_phy_device = rtl8251b_c22_match_phy_device,
+ .name = "RTL8251B 5Gbps PHY (C22)",
.get_features = rtl822x_get_features,
.config_aneg = rtl822x_config_aneg,
.config_init = rtl822x_config_init,
@@ -1164,6 +1313,16 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ }, {
+ .match_phy_device = rtl8251b_c45_match_phy_device,
+ .name = "RTL8251B 5Gbps PHY (C45)",
+ .config_init = rtl822x_config_init,
+ .get_rate_matching = rtl822x_get_rate_matching,
+ .get_features = rtl822x_c45_get_features,
+ .config_aneg = rtl822x_c45_config_aneg,
+ .read_status = rtl822x_c45_read_status,
+ .suspend = genphy_c45_pma_suspend,
+ .resume = rtlgen_c45_resume,
}, {
PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
Add driver instances for Clause 45 communication with the RTL8221B/8251B. This is used by Clause 45 only accessible PHY's on several sfp modules, which are using RollBall protocol. Signed-off-by: Eric Woudstra <ericwouds@gmail.com> --- drivers/net/phy/realtek.c | 171 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 165 insertions(+), 6 deletions(-)