| Message ID | 20240301213231.10340-1-laurent.pinchart@ideasonboard.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | media: Add driver for the Raspberry Pi <5 CSI-2 receiver | expand |
The subject line should obviously have read 'PATCH v6', and I should have updated Jean-Michel's e-mail address instead of blindly relying on get-maintainer.pl. Maybe sending patches on a Friday evening isn't he best idea after all. Sorry about that. On Fri, Mar 01, 2024 at 11:32:15PM +0200, Laurent Pinchart wrote: > Hello everybody, > > This patch series adds a new driver for the BCM2835 (and derivative) > CCP2/CSI2 camera interface named Unicam. This IP core is found in the > VC4-based Raspberry Pi, namely the Pi Zero, Pi 3 and Pi 4. > > Camera support for Raspberry Pi 4 currently relies on a downstream > Unicam driver that live in the Raspberry Pi kernel tree ([1]). The > driver uses the V4L2 API, but works around the lack of features in V4L2 > to properly support sensor embedded data. Since the Unicam driver > development by Raspberry Pi, some of those features have been merged in > the kernel (namely the V4L2 streams API) or are being developed (namely > generic metadata formats and subdev internal pads), with patches posted > for review on the linux-media mailing list ([2]). > > This new upstream driver is based on the downstream code, extensively > reworked to use the new V4L2 APIs. > > The series is based on top of a merge of > > - v7 of the generic metadata and internal pads, rebased on v6.8-rc5 ([3]) > - the downstream ISP driver ported to mainline ([4]) > > For convenience, it can be found in [5]. Note that the ISP driver is > getting upstreamed separately. > > The series starts with five patches that add support for streams and > embedded data to the imx219 driver (01/15 to 05/15). Patches 06/15 to > 09/15 then add the Unicam driver, with new V4L2 pixel formats (06/15 and > 07/15) and DT bindings (08/15) The remaining patches cover DT > integration (10/15 to 14/15) with a sample DT overlay for the IMX219 > camera module (15/15). > > The patches have been tested on a Raspberry Pi 4 using an IMX219 camera > module (the Raspberry Pi camera v2), with libcamera. Updates are needed > to libcamera to use the new V4L2 APIs, patches have been posted to [6]. > For manual testing with media-ctl, corresponding API updates to > v4l-utils are available at [7]. > > The changes to the imx219 driver effectively define the interface that > raw sensors should expose to userspace. This needs to be documented > explicitly. I would like this series to first get a review round, which > will likely raise API questions. I will then work on the documentation. > > As a summary, more work is needed, but I believe we're nearing > completion. This series, along with the libcamera support, help > validating the new kernel APIs. We have in my opinion reached a point > where we can start converting other sensor drivers from the downstream > Raspberry Pi kernel to the standard APIs for embedded data, as well as > integrating the APIs in the Raspberry Pi 5 CFE driver. > > [1] https://github.com/raspberrypi/linux/tree/rpi-6.1.y/drivers/media/platform/bcm2835 > [2] https://lore.kernel.org/linux-media/20231106122539.1268265-1-sakari.ailus@linux.intel.com > [3] https://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git/log/?h=rpi/v6.8/metadata/v7 > [4] https://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git/log/?h=rpi/v6.8/isp/v2 > [5] https://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git/log/?h=rpi/v6.8/unicam/next > [6] https://lists.libcamera.org/pipermail/libcamera-devel/2024-March/040711.html > [7] https://git.linuxtv.org/pinchartl/v4l-utils.git/log/?h=metadata > > Here's the mandatory v4l2-compliance report. There are 5 errors, which > are caused by v4l2-compliance not supporting the new embedded data APIs > yet. This will be fixed and patches for v4l2-compliance will be > submitted (alongside patches to media-ctl). > > v4l2-compliance 1.27.0-5180, 64 bits, 64-bit time_t > v4l2-compliance SHA: c14579f7e5f5 2024-03-01 20:29:24 > > Compliance test for unicam device /dev/media0: > > Media Driver Info: > Driver name : unicam > Model : unicam > Serial : > Bus info : platform:fe801000.csi > Media version : 6.8.0 > Hardware revision: 0x00000000 (0) > Driver version : 6.8.0 > > Required ioctls: > test MEDIA_IOC_DEVICE_INFO: OK > test invalid ioctls: OK > > Allow for multiple opens: > test second /dev/media0 open: OK > test MEDIA_IOC_DEVICE_INFO: OK > test for unlimited opens: OK > > Media Controller ioctls: > test MEDIA_IOC_G_TOPOLOGY: OK > Entities: 4 Interfaces: 4 Pads: 8 Links: 7 > test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK > test MEDIA_IOC_SETUP_LINK: OK > > Total for unicam device /dev/media0: 8, Succeeded: 8, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for unicam device /dev/video0: > > Driver Info: > Driver name : unicam > Card type : unicam > Bus info : platform:fe801000.csi > Driver version : 6.8.0 > Capabilities : 0xa4a00001 > Video Capture > Metadata Capture > I/O MC > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x24200001 > Video Capture > I/O MC > Streaming > Extended Pix Format > Media Driver Info: > Driver name : unicam > Model : unicam > Serial : > Bus info : platform:fe801000.csi > Media version : 6.8.0 > Hardware revision: 0x00000000 (0) > Driver version : 6.8.0 > Interface Info: > ID : 0x0300000d > Type : V4L Video > Entity Info: > ID : 0x0000000b (11) > Name : unicam-image > Function : V4L2 I/O > Flags : default > Pad 0x0100000c : 0: Sink > Link 0x0200000f: from remote pad 0x1000003 of entity 'unicam' (Video Interface Bridge): Data, Enabled, Immutable > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > test invalid ioctls: OK > > Allow for multiple opens: > test second /dev/video0 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls (Input 0): > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > test VIDIOC_QUERYCTRL: OK (Not Supported) > test VIDIOC_G/S_CTRL: OK (Not Supported) > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls (Input 0): > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls (Input 0): > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls (Input 0): > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test CREATE_BUFS maximum buffers: OK > test VIDIOC_EXPBUF: OK > test Requests: OK (Not Supported) > > Total for unicam device /dev/video0: 47, Succeeded: 47, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for unicam device /dev/video1: > > Driver Info: > Driver name : unicam > Card type : unicam > Bus info : platform:fe801000.csi > Driver version : 6.8.0 > Capabilities : 0xa4a00001 > Video Capture > Metadata Capture > I/O MC > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x24a00000 > Metadata Capture > I/O MC > Streaming > Extended Pix Format > Media Driver Info: > Driver name : unicam > Model : unicam > Serial : > Bus info : platform:fe801000.csi > Media version : 6.8.0 > Hardware revision: 0x00000000 (0) > Driver version : 6.8.0 > Interface Info: > ID : 0x03000013 > Type : V4L Video > Entity Info: > ID : 0x00000011 (17) > Name : unicam-embedded > Function : V4L2 I/O > Pad 0x01000012 : 0: Sink > Link 0x02000015: from remote pad 0x1000004 of entity 'unicam' (Video Interface Bridge): Data, Enabled, Immutable > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > test invalid ioctls: OK > > Allow for multiple opens: > test second /dev/video1 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls (Input 0): > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > test VIDIOC_QUERYCTRL: OK (Not Supported) > test VIDIOC_G/S_CTRL: OK (Not Supported) > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls (Input 0): > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > fail: v4l2-test-formats.cpp(590): dataformat 00003ff8 (x?) for buftype 13 not reported by ENUM_FMT > test VIDIOC_TRY_FMT: FAIL > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls (Input 0): > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls (Input 0): > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test CREATE_BUFS maximum buffers: OK > test VIDIOC_EXPBUF: OK > test Requests: OK (Not Supported) > > Total for unicam device /dev/video1: 47, Succeeded: 46, Failed: 1, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for unicam device /dev/v4l-subdev0: > > Driver Info: > Driver version : 6.8.0 > Capabilities : 0x00000002 > Streams Support > Client Capabilities: 0x0000000000000003 > streams interval-uses-which Media Driver Info: > Driver name : unicam > Model : unicam > Serial : > Bus info : platform:fe801000.csi > Media version : 6.8.0 > Hardware revision: 0x00000000 (0) > Driver version : 6.8.0 > Interface Info: > ID : 0x03000017 > Type : V4L Sub-Device > Entity Info: > ID : 0x00000001 (1) > Name : unicam > Function : Video Interface Bridge > Pad 0x01000002 : 0: Sink > Link 0x02000009: from remote pad 0x1000006 of entity 'imx219 5-0010' (Camera Sensor): Data, Enabled, Immutable > Pad 0x01000003 : 1: Source > Link 0x0200000f: to remote pad 0x100000c of entity 'unicam-image' (V4L2 I/O): Data, Enabled, Immutable > Pad 0x01000004 : 2: Source > Link 0x02000015: to remote pad 0x1000012 of entity 'unicam-embedded' (V4L2 I/O): Data, Enabled, Immutable > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_SUDBEV_QUERYCAP: OK > test invalid ioctls: OK > > Allow for multiple opens: > test second /dev/v4l-subdev0 open: OK > test VIDIOC_SUBDEV_QUERYCAP: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Sub-Device routing ioctls: > fail: v4l2-test-subdevs.cpp(631): !(source->flags & MEDIA_PAD_FL_SOURCE) > test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: FAIL > fail: v4l2-test-subdevs.cpp(631): !(source->flags & MEDIA_PAD_FL_SOURCE) > test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: FAIL > > Sub-Device ioctls (Sink Pad 0): > > Sub-Device ioctls (Source Pad 1): > > Sub-Device ioctls (Source Pad 2): > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > test VIDIOC_QUERYCTRL: OK (Not Supported) > test VIDIOC_G/S_CTRL: OK (Not Supported) > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK (Not Supported) > test VIDIOC_TRY_FMT: OK (Not Supported) > test VIDIOC_S_FMT: OK (Not Supported) > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) > test CREATE_BUFS maximum buffers: OK > test VIDIOC_EXPBUF: OK (Not Supported) > test Requests: OK (Not Supported) > > Total for unicam device /dev/v4l-subdev0: 47, Succeeded: 45, Failed: 2, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for unicam device /dev/v4l-subdev1: > > Driver Info: > Driver version : 6.8.0 > Capabilities : 0x00000002 > Streams Support > Client Capabilities: 0x0000000000000003 > streams interval-uses-which Media Driver Info: > Driver name : unicam > Model : unicam > Serial : > Bus info : platform:fe801000.csi > Media version : 6.8.0 > Hardware revision: 0x00000000 (0) > Driver version : 6.8.0 > Interface Info: > ID : 0x03000019 > Type : V4L Sub-Device > Entity Info: > ID : 0x00000005 (5) > Name : imx219 5-0010 > Function : Camera Sensor > Pad 0x01000006 : 0: Source > Link 0x02000009: to remote pad 0x1000002 of entity 'unicam' (Video Interface Bridge): Data, Enabled, Immutable > Pad 0x01000007 : 1: Sink, 00000008 > Pad 0x01000008 : 2: Sink, 00000008 > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_SUDBEV_QUERYCAP: OK > test invalid ioctls: OK > > Allow for multiple opens: > test second /dev/v4l-subdev1 open: OK > test VIDIOC_SUBDEV_QUERYCAP: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Sub-Device routing ioctls: > fail: v4l2-test-subdevs.cpp(630): !(sink->flags & MEDIA_PAD_FL_SINK) > test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: FAIL > fail: v4l2-test-subdevs.cpp(630): !(sink->flags & MEDIA_PAD_FL_SINK) > test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: FAIL > > Sub-Device ioctls (Source Pad 0): > > Sub-Device ioctls (Sink Pad 1): > > Sub-Device ioctls (Sink Pad 2): > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 20 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK (Not Supported) > test VIDIOC_TRY_FMT: OK (Not Supported) > test VIDIOC_S_FMT: OK (Not Supported) > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) > test CREATE_BUFS maximum buffers: OK > test VIDIOC_EXPBUF: OK (Not Supported) > test Requests: OK (Not Supported) > > Total for unicam device /dev/v4l-subdev1: 47, Succeeded: 45, Failed: 2, Warnings: 0 > > Grand Total for unicam device /dev/media0: 196, Succeeded: 191, Failed: 5, Warnings: 0 > > > Dave Stevenson (2): > dt-bindings: media: Add bindings for bcm2835-unicam > media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface > > Jean-Michel Hautbois (3): > media: v4l: Add V4L2-PIX-FMT-Y12P format > media: v4l: Add V4L2-PIX-FMT-Y14P format > ARM: dts: bcm2835: Add Unicam CSI nodes > > Laurent Pinchart (8): > media: i2c: imx219: Inline imx219_update_pad_format() in its caller > media: i2c: imx219: Add internal image sink pad > media: i2c: imx219: Report internal routes to userspace > media: i2c: imx219: Report streams using frame descriptors > media: i2c: imx219: Add embedded data support > ARM: dts: bcm2835-rpi: Move firmware-clocks from bcm2711 to bcm2835 > ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator > [DNI] arm64: dts: broadcom: Add overlay for Raspberry Pi 4B IMX219 > camera > > Uwe Kleine-König (2): > ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0 > ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0 > > .../bindings/media/brcm,bcm2835-unicam.yaml | 117 + > .../media/v4l/pixfmt-yuv-luma.rst | 48 + > MAINTAINERS | 7 + > .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 7 + > .../boot/dts/broadcom/bcm2711-rpi-cm4-io.dts | 17 + > arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi | 36 +- > arch/arm/boot/dts/broadcom/bcm2711.dtsi | 8 + > arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi | 19 + > arch/arm/boot/dts/broadcom/bcm283x.dtsi | 24 + > arch/arm64/boot/dts/broadcom/Makefile | 2 + > .../dts/broadcom/bcm2711-rpi-4-b-imx219.dtso | 65 + > drivers/media/i2c/imx219.c | 419 ++- > drivers/media/platform/Kconfig | 1 + > drivers/media/platform/Makefile | 1 + > drivers/media/platform/broadcom/Kconfig | 23 + > drivers/media/platform/broadcom/Makefile | 3 + > .../platform/broadcom/bcm2835-unicam-regs.h | 255 ++ > .../media/platform/broadcom/bcm2835-unicam.c | 2607 +++++++++++++++++ > drivers/media/v4l2-core/v4l2-ioctl.c | 2 + > include/uapi/linux/videodev2.h | 2 + > 20 files changed, 3588 insertions(+), 75 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml > create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b-imx219.dtso > create mode 100644 drivers/media/platform/broadcom/Kconfig > create mode 100644 drivers/media/platform/broadcom/Makefile > create mode 100644 drivers/media/platform/broadcom/bcm2835-unicam-regs.h > create mode 100644 drivers/media/platform/broadcom/bcm2835-unicam.c > > > base-commit: 384a3aa6b48b29b4c71130c028db78484a0f0ab4
Hi Laurent, On 3/1/2024 1:38 PM, Laurent Pinchart wrote: > The subject line should obviously have read 'PATCH v6', and I should > have updated Jean-Michel's e-mail address instead of blindly relying on > get-maintainer.pl. Maybe sending patches on a Friday evening isn't he > best idea after all. Sorry about that. > > On Fri, Mar 01, 2024 at 11:32:15PM +0200, Laurent Pinchart wrote: >> Hello everybody, >> >> This patch series adds a new driver for the BCM2835 (and derivative) >> CCP2/CSI2 camera interface named Unicam. This IP core is found in the >> VC4-based Raspberry Pi, namely the Pi Zero, Pi 3 and Pi 4. >> >> Camera support for Raspberry Pi 4 currently relies on a downstream >> Unicam driver that live in the Raspberry Pi kernel tree ([1]). The >> driver uses the V4L2 API, but works around the lack of features in V4L2 >> to properly support sensor embedded data. Since the Unicam driver >> development by Raspberry Pi, some of those features have been merged in >> the kernel (namely the V4L2 streams API) or are being developed (namely >> generic metadata formats and subdev internal pads), with patches posted >> for review on the linux-media mailing list ([2]). >> >> This new upstream driver is based on the downstream code, extensively >> reworked to use the new V4L2 APIs. >> >> The series is based on top of a merge of >> >> - v7 of the generic metadata and internal pads, rebased on v6.8-rc5 ([3]) >> - the downstream ISP driver ported to mainline ([4]) >> >> For convenience, it can be found in [5]. Note that the ISP driver is >> getting upstreamed separately. >> >> The series starts with five patches that add support for streams and >> embedded data to the imx219 driver (01/15 to 05/15). Patches 06/15 to >> 09/15 then add the Unicam driver, with new V4L2 pixel formats (06/15 and >> 07/15) and DT bindings (08/15) The remaining patches cover DT >> integration (10/15 to 14/15) with a sample DT overlay for the IMX219 >> camera module (15/15). I am really keen on taking the DTS patches now so you know those are taken care of, make it to linux-next shortly and then we can focus on the drivers/media aspects. Stefan, does that work for you?
Hi Florian, On Fri, Mar 15, 2024 at 07:02:38AM -0700, Florian Fainelli wrote: > On 3/1/2024 1:38 PM, Laurent Pinchart wrote: > > The subject line should obviously have read 'PATCH v6', and I should > > have updated Jean-Michel's e-mail address instead of blindly relying on > > get-maintainer.pl. Maybe sending patches on a Friday evening isn't he > > best idea after all. Sorry about that. > > > > On Fri, Mar 01, 2024 at 11:32:15PM +0200, Laurent Pinchart wrote: > >> Hello everybody, > >> > >> This patch series adds a new driver for the BCM2835 (and derivative) > >> CCP2/CSI2 camera interface named Unicam. This IP core is found in the > >> VC4-based Raspberry Pi, namely the Pi Zero, Pi 3 and Pi 4. > >> > >> Camera support for Raspberry Pi 4 currently relies on a downstream > >> Unicam driver that live in the Raspberry Pi kernel tree ([1]). The > >> driver uses the V4L2 API, but works around the lack of features in V4L2 > >> to properly support sensor embedded data. Since the Unicam driver > >> development by Raspberry Pi, some of those features have been merged in > >> the kernel (namely the V4L2 streams API) or are being developed (namely > >> generic metadata formats and subdev internal pads), with patches posted > >> for review on the linux-media mailing list ([2]). > >> > >> This new upstream driver is based on the downstream code, extensively > >> reworked to use the new V4L2 APIs. > >> > >> The series is based on top of a merge of > >> > >> - v7 of the generic metadata and internal pads, rebased on v6.8-rc5 ([3]) > >> - the downstream ISP driver ported to mainline ([4]) > >> > >> For convenience, it can be found in [5]. Note that the ISP driver is > >> getting upstreamed separately. > >> > >> The series starts with five patches that add support for streams and > >> embedded data to the imx219 driver (01/15 to 05/15). Patches 06/15 to > >> 09/15 then add the Unicam driver, with new V4L2 pixel formats (06/15 and > >> 07/15) and DT bindings (08/15) The remaining patches cover DT > >> integration (10/15 to 14/15) with a sample DT overlay for the IMX219 > >> camera module (15/15). > > I am really keen on taking the DTS patches now so you know those are > taken care of, make it to linux-next shortly and then we can focus on > the drivers/media aspects. Stefan, does that work for you? 10/15 and 11/15 should be fine to merge already, although 11/15 depends on the DT bindings in 08/15. Even if the unicam driver needs a respin, I think the bindings are safe to merge already. Do you plan to take them in your tree with the corresponding DTS patches ? For 12/15 (the pinctrl-based I2C multiplexing), I'd really like an ack from Dave. 13/15 is pretty straightforward but depends on 12/15. 14/15 is independent from all the other patches and can safely be merged I think.
Hello everybody, This patch series adds a new driver for the BCM2835 (and derivative) CCP2/CSI2 camera interface named Unicam. This IP core is found in the VC4-based Raspberry Pi, namely the Pi Zero, Pi 3 and Pi 4. Camera support for Raspberry Pi 4 currently relies on a downstream Unicam driver that live in the Raspberry Pi kernel tree ([1]). The driver uses the V4L2 API, but works around the lack of features in V4L2 to properly support sensor embedded data. Since the Unicam driver development by Raspberry Pi, some of those features have been merged in the kernel (namely the V4L2 streams API) or are being developed (namely generic metadata formats and subdev internal pads), with patches posted for review on the linux-media mailing list ([2]). This new upstream driver is based on the downstream code, extensively reworked to use the new V4L2 APIs. The series is based on top of a merge of - v7 of the generic metadata and internal pads, rebased on v6.8-rc5 ([3]) - the downstream ISP driver ported to mainline ([4]) For convenience, it can be found in [5]. Note that the ISP driver is getting upstreamed separately. The series starts with five patches that add support for streams and embedded data to the imx219 driver (01/15 to 05/15). Patches 06/15 to 09/15 then add the Unicam driver, with new V4L2 pixel formats (06/15 and 07/15) and DT bindings (08/15) The remaining patches cover DT integration (10/15 to 14/15) with a sample DT overlay for the IMX219 camera module (15/15). The patches have been tested on a Raspberry Pi 4 using an IMX219 camera module (the Raspberry Pi camera v2), with libcamera. Updates are needed to libcamera to use the new V4L2 APIs, patches have been posted to [6]. For manual testing with media-ctl, corresponding API updates to v4l-utils are available at [7]. The changes to the imx219 driver effectively define the interface that raw sensors should expose to userspace. This needs to be documented explicitly. I would like this series to first get a review round, which will likely raise API questions. I will then work on the documentation. As a summary, more work is needed, but I believe we're nearing completion. This series, along with the libcamera support, help validating the new kernel APIs. We have in my opinion reached a point where we can start converting other sensor drivers from the downstream Raspberry Pi kernel to the standard APIs for embedded data, as well as integrating the APIs in the Raspberry Pi 5 CFE driver. [1] https://github.com/raspberrypi/linux/tree/rpi-6.1.y/drivers/media/platform/bcm2835 [2] https://lore.kernel.org/linux-media/20231106122539.1268265-1-sakari.ailus@linux.intel.com [3] https://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git/log/?h=rpi/v6.8/metadata/v7 [4] https://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git/log/?h=rpi/v6.8/isp/v2 [5] https://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git/log/?h=rpi/v6.8/unicam/next [6] https://lists.libcamera.org/pipermail/libcamera-devel/2024-March/040711.html [7] https://git.linuxtv.org/pinchartl/v4l-utils.git/log/?h=metadata Here's the mandatory v4l2-compliance report. There are 5 errors, which are caused by v4l2-compliance not supporting the new embedded data APIs yet. This will be fixed and patches for v4l2-compliance will be submitted (alongside patches to media-ctl). v4l2-compliance 1.27.0-5180, 64 bits, 64-bit time_t v4l2-compliance SHA: c14579f7e5f5 2024-03-01 20:29:24 Compliance test for unicam device /dev/media0: Media Driver Info: Driver name : unicam Model : unicam Serial : Bus info : platform:fe801000.csi Media version : 6.8.0 Hardware revision: 0x00000000 (0) Driver version : 6.8.0 Required ioctls: test MEDIA_IOC_DEVICE_INFO: OK test invalid ioctls: OK Allow for multiple opens: test second /dev/media0 open: OK test MEDIA_IOC_DEVICE_INFO: OK test for unlimited opens: OK Media Controller ioctls: test MEDIA_IOC_G_TOPOLOGY: OK Entities: 4 Interfaces: 4 Pads: 8 Links: 7 test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK test MEDIA_IOC_SETUP_LINK: OK Total for unicam device /dev/media0: 8, Succeeded: 8, Failed: 0, Warnings: 0 -------------------------------------------------------------------------------- Compliance test for unicam device /dev/video0: Driver Info: Driver name : unicam Card type : unicam Bus info : platform:fe801000.csi Driver version : 6.8.0 Capabilities : 0xa4a00001 Video Capture Metadata Capture I/O MC Streaming Extended Pix Format Device Capabilities Device Caps : 0x24200001 Video Capture I/O MC Streaming Extended Pix Format Media Driver Info: Driver name : unicam Model : unicam Serial : Bus info : platform:fe801000.csi Media version : 6.8.0 Hardware revision: 0x00000000 (0) Driver version : 6.8.0 Interface Info: ID : 0x0300000d Type : V4L Video Entity Info: ID : 0x0000000b (11) Name : unicam-image Function : V4L2 I/O Flags : default Pad 0x0100000c : 0: Sink Link 0x0200000f: from remote pad 0x1000003 of entity 'unicam' (Video Interface Bridge): Data, Enabled, Immutable Required ioctls: test MC information (see 'Media Driver Info' above): OK test VIDIOC_QUERYCAP: OK test invalid ioctls: OK Allow for multiple opens: test second /dev/video0 open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK test for unlimited opens: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 1 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Control ioctls (Input 0): test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) test VIDIOC_QUERYCTRL: OK (Not Supported) test VIDIOC_G/S_CTRL: OK (Not Supported) test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 0 Private Controls: 0 Format ioctls (Input 0): test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK test VIDIOC_TRY_FMT: OK test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK Codec ioctls (Input 0): test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls (Input 0): test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test CREATE_BUFS maximum buffers: OK test VIDIOC_EXPBUF: OK test Requests: OK (Not Supported) Total for unicam device /dev/video0: 47, Succeeded: 47, Failed: 0, Warnings: 0 -------------------------------------------------------------------------------- Compliance test for unicam device /dev/video1: Driver Info: Driver name : unicam Card type : unicam Bus info : platform:fe801000.csi Driver version : 6.8.0 Capabilities : 0xa4a00001 Video Capture Metadata Capture I/O MC Streaming Extended Pix Format Device Capabilities Device Caps : 0x24a00000 Metadata Capture I/O MC Streaming Extended Pix Format Media Driver Info: Driver name : unicam Model : unicam Serial : Bus info : platform:fe801000.csi Media version : 6.8.0 Hardware revision: 0x00000000 (0) Driver version : 6.8.0 Interface Info: ID : 0x03000013 Type : V4L Video Entity Info: ID : 0x00000011 (17) Name : unicam-embedded Function : V4L2 I/O Pad 0x01000012 : 0: Sink Link 0x02000015: from remote pad 0x1000004 of entity 'unicam' (Video Interface Bridge): Data, Enabled, Immutable Required ioctls: test MC information (see 'Media Driver Info' above): OK test VIDIOC_QUERYCAP: OK test invalid ioctls: OK Allow for multiple opens: test second /dev/video1 open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK test for unlimited opens: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 1 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Control ioctls (Input 0): test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) test VIDIOC_QUERYCTRL: OK (Not Supported) test VIDIOC_G/S_CTRL: OK (Not Supported) test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 0 Private Controls: 0 Format ioctls (Input 0): test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK fail: v4l2-test-formats.cpp(590): dataformat 00003ff8 (x?) for buftype 13 not reported by ENUM_FMT test VIDIOC_TRY_FMT: FAIL test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls (Input 0): test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls (Input 0): test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test CREATE_BUFS maximum buffers: OK test VIDIOC_EXPBUF: OK test Requests: OK (Not Supported) Total for unicam device /dev/video1: 47, Succeeded: 46, Failed: 1, Warnings: 0 -------------------------------------------------------------------------------- Compliance test for unicam device /dev/v4l-subdev0: Driver Info: Driver version : 6.8.0 Capabilities : 0x00000002 Streams Support Client Capabilities: 0x0000000000000003 streams interval-uses-which Media Driver Info: Driver name : unicam Model : unicam Serial : Bus info : platform:fe801000.csi Media version : 6.8.0 Hardware revision: 0x00000000 (0) Driver version : 6.8.0 Interface Info: ID : 0x03000017 Type : V4L Sub-Device Entity Info: ID : 0x00000001 (1) Name : unicam Function : Video Interface Bridge Pad 0x01000002 : 0: Sink Link 0x02000009: from remote pad 0x1000006 of entity 'imx219 5-0010' (Camera Sensor): Data, Enabled, Immutable Pad 0x01000003 : 1: Source Link 0x0200000f: to remote pad 0x100000c of entity 'unicam-image' (V4L2 I/O): Data, Enabled, Immutable Pad 0x01000004 : 2: Source Link 0x02000015: to remote pad 0x1000012 of entity 'unicam-embedded' (V4L2 I/O): Data, Enabled, Immutable Required ioctls: test MC information (see 'Media Driver Info' above): OK test VIDIOC_SUDBEV_QUERYCAP: OK test invalid ioctls: OK Allow for multiple opens: test second /dev/v4l-subdev0 open: OK test VIDIOC_SUBDEV_QUERYCAP: OK test for unlimited opens: OK Debug ioctls: test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Sub-Device routing ioctls: fail: v4l2-test-subdevs.cpp(631): !(source->flags & MEDIA_PAD_FL_SOURCE) test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: FAIL fail: v4l2-test-subdevs.cpp(631): !(source->flags & MEDIA_PAD_FL_SOURCE) test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: FAIL Sub-Device ioctls (Sink Pad 0): Sub-Device ioctls (Source Pad 1): Sub-Device ioctls (Source Pad 2): Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) test VIDIOC_QUERYCTRL: OK (Not Supported) test VIDIOC_G/S_CTRL: OK (Not Supported) test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 0 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK (Not Supported) test VIDIOC_TRY_FMT: OK (Not Supported) test VIDIOC_S_FMT: OK (Not Supported) test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) test CREATE_BUFS maximum buffers: OK test VIDIOC_EXPBUF: OK (Not Supported) test Requests: OK (Not Supported) Total for unicam device /dev/v4l-subdev0: 47, Succeeded: 45, Failed: 2, Warnings: 0 -------------------------------------------------------------------------------- Compliance test for unicam device /dev/v4l-subdev1: Driver Info: Driver version : 6.8.0 Capabilities : 0x00000002 Streams Support Client Capabilities: 0x0000000000000003 streams interval-uses-which Media Driver Info: Driver name : unicam Model : unicam Serial : Bus info : platform:fe801000.csi Media version : 6.8.0 Hardware revision: 0x00000000 (0) Driver version : 6.8.0 Interface Info: ID : 0x03000019 Type : V4L Sub-Device Entity Info: ID : 0x00000005 (5) Name : imx219 5-0010 Function : Camera Sensor Pad 0x01000006 : 0: Source Link 0x02000009: to remote pad 0x1000002 of entity 'unicam' (Video Interface Bridge): Data, Enabled, Immutable Pad 0x01000007 : 1: Sink, 00000008 Pad 0x01000008 : 2: Sink, 00000008 Required ioctls: test MC information (see 'Media Driver Info' above): OK test VIDIOC_SUDBEV_QUERYCAP: OK test invalid ioctls: OK Allow for multiple opens: test second /dev/v4l-subdev1 open: OK test VIDIOC_SUBDEV_QUERYCAP: OK test for unlimited opens: OK Debug ioctls: test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Sub-Device routing ioctls: fail: v4l2-test-subdevs.cpp(630): !(sink->flags & MEDIA_PAD_FL_SINK) test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: FAIL fail: v4l2-test-subdevs.cpp(630): !(sink->flags & MEDIA_PAD_FL_SINK) test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: FAIL Sub-Device ioctls (Source Pad 0): Sub-Device ioctls (Sink Pad 1): Sub-Device ioctls (Sink Pad 2): Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 20 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK (Not Supported) test VIDIOC_TRY_FMT: OK (Not Supported) test VIDIOC_S_FMT: OK (Not Supported) test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) test CREATE_BUFS maximum buffers: OK test VIDIOC_EXPBUF: OK (Not Supported) test Requests: OK (Not Supported) Total for unicam device /dev/v4l-subdev1: 47, Succeeded: 45, Failed: 2, Warnings: 0 Grand Total for unicam device /dev/media0: 196, Succeeded: 191, Failed: 5, Warnings: 0 Dave Stevenson (2): dt-bindings: media: Add bindings for bcm2835-unicam media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface Jean-Michel Hautbois (3): media: v4l: Add V4L2-PIX-FMT-Y12P format media: v4l: Add V4L2-PIX-FMT-Y14P format ARM: dts: bcm2835: Add Unicam CSI nodes Laurent Pinchart (8): media: i2c: imx219: Inline imx219_update_pad_format() in its caller media: i2c: imx219: Add internal image sink pad media: i2c: imx219: Report internal routes to userspace media: i2c: imx219: Report streams using frame descriptors media: i2c: imx219: Add embedded data support ARM: dts: bcm2835-rpi: Move firmware-clocks from bcm2711 to bcm2835 ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator [DNI] arm64: dts: broadcom: Add overlay for Raspberry Pi 4B IMX219 camera Uwe Kleine-König (2): ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0 ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0 .../bindings/media/brcm,bcm2835-unicam.yaml | 117 + .../media/v4l/pixfmt-yuv-luma.rst | 48 + MAINTAINERS | 7 + .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 7 + .../boot/dts/broadcom/bcm2711-rpi-cm4-io.dts | 17 + arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi | 36 +- arch/arm/boot/dts/broadcom/bcm2711.dtsi | 8 + arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi | 19 + arch/arm/boot/dts/broadcom/bcm283x.dtsi | 24 + arch/arm64/boot/dts/broadcom/Makefile | 2 + .../dts/broadcom/bcm2711-rpi-4-b-imx219.dtso | 65 + drivers/media/i2c/imx219.c | 419 ++- drivers/media/platform/Kconfig | 1 + drivers/media/platform/Makefile | 1 + drivers/media/platform/broadcom/Kconfig | 23 + drivers/media/platform/broadcom/Makefile | 3 + .../platform/broadcom/bcm2835-unicam-regs.h | 255 ++ .../media/platform/broadcom/bcm2835-unicam.c | 2607 +++++++++++++++++ drivers/media/v4l2-core/v4l2-ioctl.c | 2 + include/uapi/linux/videodev2.h | 2 + 20 files changed, 3588 insertions(+), 75 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b-imx219.dtso create mode 100644 drivers/media/platform/broadcom/Kconfig create mode 100644 drivers/media/platform/broadcom/Makefile create mode 100644 drivers/media/platform/broadcom/bcm2835-unicam-regs.h create mode 100644 drivers/media/platform/broadcom/bcm2835-unicam.c base-commit: 384a3aa6b48b29b4c71130c028db78484a0f0ab4