[v2] arm64: dts: rockchip: qnap-ts433: Fix name for UART pin header

Commit Message

Uwe Kleine-König March 1, 2024, 4:32 p.m. UTC

I typoed the pin header name when copying it from my notes on paper.

Fixes: 9da1c0327d58 ("arm64: dts: rockchip: Add basic support for QNAP TS-433")
Signed-off-by: Uwe Kleine-König <[e-mail]>
---
Hello,

only change is that I fixed the Sob line to match the sender.

Best regards
Uwe

 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)


base-commit: 1870cdc0e8dee32e3c221704a2977898ba4c10e8

Comments

Heiko Stübner March 2, 2024, 12:02 p.m. UTC | #1

On Fri, 1 Mar 2024 17:32:00 +0100, Uwe Kleine-König wrote:
> I typoed the pin header name when copying it from my notes on paper.
> 
> 

Applied, thanks!

[1/1] arm64: dts: rockchip: qnap-ts433: Fix name for UART pin header
      commit: c5a48ffb5206cd604eff4bb369efc1a7580d1ec1

Best regards,

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index 2908486bc924..6a998166003c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -76,7 +76,7 @@  &sdhci {
 };
 
 /*
- * Pins available on CN2 connector at TTL voltage level (3V3).
+ * Pins available on CN3 connector at TTL voltage level (3V3).
  * ,_  _.
  * |1234|  1=TX 2=VCC
  * `----'  3=RX 4=GND