diff mbox series

[1/3] t1006: update 'run_tests' to test generic object specifiers

Message ID 765d7240311e145b43bbe40f00436f3854a4a177.1710183362.git.gitgitgadget@gmail.com (mailing list archive)
State New, archived
Headers show
Series cat-file: add %(objectmode) avoid verifying submodules' OIDs | expand

Commit Message

Victoria Dye March 11, 2024, 6:56 p.m. UTC 
From: Victoria Dye <vdye@github.com>

Update the 'run_tests' test wrapper so that the first argument may refer to
any specifier that uniquely identifies an object (e.g. a ref name,
'<OID>:<path>', '<OID>^{<type>}', etc.), rather than only a full object ID.
Also, add a test that uses a non-OID identifier, ensuring appropriate
parsing in 'cat-file'.

Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
---
 t/t1006-cat-file.sh | 46 +++++++++++++++++++++++----------------------
 1 file changed, 24 insertions(+), 22 deletions(-)

Comments

Junio C Hamano March 11, 2024, 9:54 p.m. UTC | #1 
"Victoria Dye via GitGitGadget" <gitgitgadget@gmail.com> writes:

> From: Victoria Dye <vdye@github.com>
>
> Update the 'run_tests' test wrapper so that the first argument may refer to
> any specifier that uniquely identifies an object (e.g. a ref name,
> '<OID>:<path>', '<OID>^{<type>}', etc.), rather than only a full object ID.
> Also, add a test that uses a non-OID identifier, ensuring appropriate
> parsing in 'cat-file'.
>
> Signed-off-by: Victoria Dye <vdye@github.com>
> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
> ---
>  t/t1006-cat-file.sh | 46 +++++++++++++++++++++++----------------------
>  1 file changed, 24 insertions(+), 22 deletions(-)
>
> diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh
> index e0c6482797e..ac1f754ee32 100755
> --- a/t/t1006-cat-file.sh
> +++ b/t/t1006-cat-file.sh
> @@ -112,65 +112,66 @@ strlen () {
>  
>  run_tests () {
>      type=$1
> -    sha1=$2
> +    object_name=$2
> +    oid=$(git rev-parse --verify $object_name)
>      size=$3
>      content=$4
>      pretty_content=$5
>  
> -    batch_output="$sha1 $type $size
> +    batch_output="$oid $type $size
>  $content"

As "object_name" is now allowed to be any name in the 'extended
SHA-1' syntax (cf. Documentation/revisions.txt), you should be a bit
more careful in quoting.

	oid=$(git rev-parse --verify "$object_name")

>      test_expect_success "$type exists" '
> -	git cat-file -e $sha1
> +	git cat-file -e $object_name
>      '

Likewise.  You may not currently use a path with SP in it to name a
tree object, e.g., "HEAD:Read Me.txt", but protecting against such a
pathname is a cheap investment for futureproofing.

Looking good otherwise.  Thanks.
diff mbox series

Patch

diff --git a/t/t1006-cat-file.sh b/t/t1006-cat-file.sh
index e0c6482797e..ac1f754ee32 100755
--- a/t/t1006-cat-file.sh
+++ b/t/t1006-cat-file.sh
@@ -112,65 +112,66 @@  strlen () {
 
 run_tests () {
     type=$1
-    sha1=$2
+    object_name=$2
+    oid=$(git rev-parse --verify $object_name)
     size=$3
     content=$4
     pretty_content=$5
 
-    batch_output="$sha1 $type $size
+    batch_output="$oid $type $size
 $content"
 
     test_expect_success "$type exists" '
-	git cat-file -e $sha1
+	git cat-file -e $object_name
     '
 
     test_expect_success "Type of $type is correct" '
 	echo $type >expect &&
-	git cat-file -t $sha1 >actual &&
+	git cat-file -t $object_name >actual &&
 	test_cmp expect actual
     '
 
     test_expect_success "Size of $type is correct" '
 	echo $size >expect &&
-	git cat-file -s $sha1 >actual &&
+	git cat-file -s $object_name >actual &&
 	test_cmp expect actual
     '
 
     test_expect_success "Type of $type is correct using --allow-unknown-type" '
 	echo $type >expect &&
-	git cat-file -t --allow-unknown-type $sha1 >actual &&
+	git cat-file -t --allow-unknown-type $object_name >actual &&
 	test_cmp expect actual
     '
 
     test_expect_success "Size of $type is correct using --allow-unknown-type" '
 	echo $size >expect &&
-	git cat-file -s --allow-unknown-type $sha1 >actual &&
+	git cat-file -s --allow-unknown-type $object_name >actual &&
 	test_cmp expect actual
     '
 
     test -z "$content" ||
     test_expect_success "Content of $type is correct" '
 	echo_without_newline "$content" >expect &&
-	git cat-file $type $sha1 >actual &&
+	git cat-file $type $object_name >actual &&
 	test_cmp expect actual
     '
 
     test_expect_success "Pretty content of $type is correct" '
 	echo_without_newline "$pretty_content" >expect &&
-	git cat-file -p $sha1 >actual &&
+	git cat-file -p $object_name >actual &&
 	test_cmp expect actual
     '
 
     test -z "$content" ||
     test_expect_success "--batch output of $type is correct" '
 	echo "$batch_output" >expect &&
-	echo $sha1 | git cat-file --batch >actual &&
+	echo $object_name | git cat-file --batch >actual &&
 	test_cmp expect actual
     '
 
     test_expect_success "--batch-check output of $type is correct" '
-	echo "$sha1 $type $size" >expect &&
-	echo_without_newline $sha1 | git cat-file --batch-check >actual &&
+	echo "$oid $type $size" >expect &&
+	echo_without_newline $object_name | git cat-file --batch-check >actual &&
 	test_cmp expect actual
     '
 
@@ -179,33 +180,33 @@  $content"
 	test -z "$content" ||
 		test_expect_success "--batch-command $opt output of $type content is correct" '
 		echo "$batch_output" >expect &&
-		test_write_lines "contents $sha1" | git cat-file --batch-command $opt >actual &&
+		test_write_lines "contents $object_name" | git cat-file --batch-command $opt >actual &&
 		test_cmp expect actual
 	'
 
 	test_expect_success "--batch-command $opt output of $type info is correct" '
-		echo "$sha1 $type $size" >expect &&
-		test_write_lines "info $sha1" |
+		echo "$oid $type $size" >expect &&
+		test_write_lines "info $object_name" |
 		git cat-file --batch-command $opt >actual &&
 		test_cmp expect actual
 	'
     done
 
     test_expect_success "custom --batch-check format" '
-	echo "$type $sha1" >expect &&
-	echo $sha1 | git cat-file --batch-check="%(objecttype) %(objectname)" >actual &&
+	echo "$type $oid" >expect &&
+	echo $object_name | git cat-file --batch-check="%(objecttype) %(objectname)" >actual &&
 	test_cmp expect actual
     '
 
     test_expect_success "custom --batch-command format" '
-	echo "$type $sha1" >expect &&
-	echo "info $sha1" | git cat-file --batch-command="%(objecttype) %(objectname)" >actual &&
+	echo "$type $oid" >expect &&
+	echo "info $object_name" | git cat-file --batch-command="%(objecttype) %(objectname)" >actual &&
 	test_cmp expect actual
     '
 
     test_expect_success '--batch-check with %(rest)' '
 	echo "$type this is some extra content" >expect &&
-	echo "$sha1    this is some extra content" |
+	echo "$object_name    this is some extra content" |
 		git cat-file --batch-check="%(objecttype) %(rest)" >actual &&
 	test_cmp expect actual
     '
@@ -216,7 +217,7 @@  $content"
 		echo "$size" &&
 		echo "$content"
 	} >expect &&
-	echo $sha1 | git cat-file --batch="%(objectsize)" >actual &&
+	echo $object_name | git cat-file --batch="%(objectsize)" >actual &&
 	test_cmp expect actual
     '
 
@@ -226,7 +227,7 @@  $content"
 		echo "$type" &&
 		echo "$content"
 	} >expect &&
-	echo $sha1 | git cat-file --batch="%(objecttype)" >actual &&
+	echo $object_name | git cat-file --batch="%(objecttype)" >actual &&
 	test_cmp expect actual
     '
 }
@@ -271,6 +272,7 @@  tree_size=$(($(test_oid rawsz) + 13))
 tree_pretty_content="100644 blob $hello_sha1	hello${LF}"
 
 run_tests 'tree' $tree_sha1 $tree_size "" "$tree_pretty_content"
+run_tests 'blob' "$tree_sha1:hello" $hello_size "" "$hello_content"
 
 commit_message="Initial commit"
 commit_sha1=$(echo_without_newline "$commit_message" | git commit-tree $tree_sha1)