Message ID | 20240307140728.190184-10-claudiu.beznea.uj@bp.renesas.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Geert Uytterhoeven |
Headers | show |
Series | clk: renesas: rzg2l: Add support for power domains | expand |
Hi Claudiu, On Thu, Mar 7, 2024 at 3:08 PM Claudiu <claudiu.beznea@tuxon.dev> wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > The RZG2L_PD_F_CONSOLE is used by the rzg2l-cpg driver to check if the > SCIF domain need to be powered off in suspend. This is necessary when > no_console_suspend is available in bootargs as we want to still see > output on console, thus scif0 domain should remain powered on. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Thanks for your patch! > --- a/drivers/clk/renesas/r9a08g045-cpg.c > +++ b/drivers/clk/renesas/r9a08g045-cpg.c > @@ -293,7 +293,7 @@ static const struct rzg2l_cpg_pm_domain_init_data r9a08g045_pm_domains[] = { > DEF_PD("scif0", R9A08G045_PD_SCIF0, > DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(1)), > DEF_REG_CONF(0, 0), > - RZG2L_PD_F_NONE), > + RZG2L_PD_F_CONSOLE), This is not really correct: if SCIF0 is used as the console depends on the use case, i.e. on chosen/stdout-path. So this flag should be set at run-time. You can check the power-domains property of the node pointed to by of_stdout to find the PM Domain that holds the console, cfr. drivers/pmdomain/renesas/rmobile-sysc.c. > }; > > const struct rzg2l_cpg_info r9a08g045_cpg_info = { Gr{oetje,eeting}s, Geert
Hi, Geert, On 14.03.2024 18:06, Geert Uytterhoeven wrote: > Hi Claudiu, > > On Thu, Mar 7, 2024 at 3:08 PM Claudiu <claudiu.beznea@tuxon.dev> wrote: >> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >> >> The RZG2L_PD_F_CONSOLE is used by the rzg2l-cpg driver to check if the >> SCIF domain need to be powered off in suspend. This is necessary when >> no_console_suspend is available in bootargs as we want to still see >> output on console, thus scif0 domain should remain powered on. >> >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Thanks for your patch! > >> --- a/drivers/clk/renesas/r9a08g045-cpg.c >> +++ b/drivers/clk/renesas/r9a08g045-cpg.c >> @@ -293,7 +293,7 @@ static const struct rzg2l_cpg_pm_domain_init_data r9a08g045_pm_domains[] = { >> DEF_PD("scif0", R9A08G045_PD_SCIF0, >> DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(1)), >> DEF_REG_CONF(0, 0), >> - RZG2L_PD_F_NONE), >> + RZG2L_PD_F_CONSOLE), > > This is not really correct: if SCIF0 is used as the console depends on the > use case, i.e. on chosen/stdout-path. > So this flag should be set at run-time. You can check the power-domains > property of the node pointed to by of_stdout to find the PM Domain that > holds the console, cfr. drivers/pmdomain/renesas/rmobile-sysc.c. OK, I'll double check. Thank you, Claudiu Beznea > >> }; >> >> const struct rzg2l_cpg_info r9a08g045_cpg_info = { > > Gr{oetje,eeting}s, > > Geert >
diff --git a/drivers/clk/renesas/r9a08g045-cpg.c b/drivers/clk/renesas/r9a08g045-cpg.c index c64769082f5b..86d80f357645 100644 --- a/drivers/clk/renesas/r9a08g045-cpg.c +++ b/drivers/clk/renesas/r9a08g045-cpg.c @@ -293,7 +293,7 @@ static const struct rzg2l_cpg_pm_domain_init_data r9a08g045_pm_domains[] = { DEF_PD("scif0", R9A08G045_PD_SCIF0, DEF_REG_CONF(CPG_BUS_MCPU2_MSTOP, BIT(1)), DEF_REG_CONF(0, 0), - RZG2L_PD_F_NONE), + RZG2L_PD_F_CONSOLE), }; const struct rzg2l_cpg_info r9a08g045_cpg_info = {