| Message ID | 20240307110216.2962918-2-niklas.soderlund+renesas@ragnatech.se (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | thermal: rcar_gen3: Use temperature approximation from datasheet | expand |
Hi Niklas, On Thu, Mar 7, 2024 at 12:03 PM Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> wrote: > The calculated Tj_T constant is calculated from the PTAT data either > read from the first TSC zone on the device if calibration data is fused, > or from fallback values in the driver itself. The value calculated is > shared among all TSC zones. > > Move the Tj_T constant to the shared private data structure instead of > duplicating it in each TSC private data. This requires adding a pointer > to the shared data to the TSC private data structure. This back pointer > make it easier to curter rework the temperature conversion logic. > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Thanks for your patch! > --- a/drivers/thermal/rcar_gen3_thermal.c > +++ b/drivers/thermal/rcar_gen3_thermal.c > @@ -81,10 +81,10 @@ struct rcar_thermal_info { > }; > > struct rcar_gen3_thermal_tsc { > + struct rcar_gen3_thermal_priv *priv; I had hoped you could do without this, but I couldn't find a better way. Even the contents of &priv->ops are copied (twice!) inside the thermal core, so you can't go through that... > void __iomem *base; > struct thermal_zone_device *zone; > struct equation_coefs coef; > - int tj_t; > int thcode[3]; > }; > > @@ -92,6 +92,7 @@ struct rcar_gen3_thermal_priv { > struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM]; > struct thermal_zone_device_ops ops; > unsigned int num_tscs; > + int tj_t; Insert below ptat[3], as tj_t is calculated from ptat[3], and to better approach reverse Christmas-tree ordering? > int ptat[3]; > const struct rcar_thermal_info *info; > }; > @@ -146,15 +147,15 @@ static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_priv *priv, > * Division is not scaled in BSP and if scaled it might overflow > * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled > */ > - tsc->tj_t = (FIXPT_INT((priv->ptat[1] - priv->ptat[2]) * (ths_tj_1 - TJ_3)) > - / (priv->ptat[0] - priv->ptat[2])) + FIXPT_INT(TJ_3); > + priv->tj_t = (FIXPT_INT((priv->ptat[1] - priv->ptat[2]) * (ths_tj_1 - TJ_3)) > + / (priv->ptat[0] - priv->ptat[2])) + FIXPT_INT(TJ_3); Please move the calculation of priv->tj_t to rcar_gen3_thermal_probe() or rcar_gen3_thermal_read_fuses(), so it is no longer done multiple times. Gr{oetje,eeting}s, Geert
On Thu, Mar 7, 2024 at 12:03 PM Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> wrote: > The calculated Tj_T constant is calculated from the PTAT data either > read from the first TSC zone on the device if calibration data is fused, > or from fallback values in the driver itself. The value calculated is > shared among all TSC zones. > > Move the Tj_T constant to the shared private data structure instead of > duplicating it in each TSC private data. This requires adding a pointer > to the shared data to the TSC private data structure. This back pointer > make it easier to curter rework the temperature conversion logic. further? Gr{oetje,eeting}s, Geert
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index cafcb6d6e235..da1b971b287d 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -81,10 +81,10 @@ struct rcar_thermal_info { }; struct rcar_gen3_thermal_tsc { + struct rcar_gen3_thermal_priv *priv; void __iomem *base; struct thermal_zone_device *zone; struct equation_coefs coef; - int tj_t; int thcode[3]; }; @@ -92,6 +92,7 @@ struct rcar_gen3_thermal_priv { struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM]; struct thermal_zone_device_ops ops; unsigned int num_tscs; + int tj_t; int ptat[3]; const struct rcar_thermal_info *info; }; @@ -146,15 +147,15 @@ static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_priv *priv, * Division is not scaled in BSP and if scaled it might overflow * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled */ - tsc->tj_t = (FIXPT_INT((priv->ptat[1] - priv->ptat[2]) * (ths_tj_1 - TJ_3)) - / (priv->ptat[0] - priv->ptat[2])) + FIXPT_INT(TJ_3); + priv->tj_t = (FIXPT_INT((priv->ptat[1] - priv->ptat[2]) * (ths_tj_1 - TJ_3)) + / (priv->ptat[0] - priv->ptat[2])) + FIXPT_INT(TJ_3); tsc->coef.a1 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[2]), - tsc->tj_t - FIXPT_INT(TJ_3)); + priv->tj_t - FIXPT_INT(TJ_3)); tsc->coef.b1 = FIXPT_INT(tsc->thcode[2]) - tsc->coef.a1 * TJ_3; tsc->coef.a2 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[0]), - tsc->tj_t - FIXPT_INT(ths_tj_1)); + priv->tj_t - FIXPT_INT(ths_tj_1)); tsc->coef.b2 = FIXPT_INT(tsc->thcode[0]) - tsc->coef.a2 * ths_tj_1; } @@ -196,10 +197,11 @@ static int rcar_gen3_thermal_get_temp(struct thermal_zone_device *tz, int *temp) static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc, int mcelsius) { + struct rcar_gen3_thermal_priv *priv = tsc->priv; int celsius, val; celsius = DIV_ROUND_CLOSEST(mcelsius, 1000); - if (celsius <= INT_FIXPT(tsc->tj_t)) + if (celsius <= INT_FIXPT(priv->tj_t)) val = celsius * tsc->coef.a1 + tsc->coef.b1; else val = celsius * tsc->coef.a2 + tsc->coef.b2; @@ -512,6 +514,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) goto error_unregister; } + tsc->priv = priv; tsc->base = devm_ioremap_resource(dev, res); if (IS_ERR(tsc->base)) { ret = PTR_ERR(tsc->base);
The calculated Tj_T constant is calculated from the PTAT data either read from the first TSC zone on the device if calibration data is fused, or from fallback values in the driver itself. The value calculated is shared among all TSC zones. Move the Tj_T constant to the shared private data structure instead of duplicating it in each TSC private data. This requires adding a pointer to the shared data to the TSC private data structure. This back pointer make it easier to curter rework the temperature conversion logic. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- drivers/thermal/rcar_gen3_thermal.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)