diff mbox series

[RESEND,v3] hwmon: (pmbus/mp2975) Fix IRQ masking

Message ID 20240318174406.3782306-1-naresh.solanki@9elements.com (mailing list archive)
State Accepted
Headers show
Series [RESEND,v3] hwmon: (pmbus/mp2975) Fix IRQ masking | expand

Commit Message

Naresh Solanki March 18, 2024, 5:44 p.m. UTC 
From: Patrick Rudolph <patrick.rudolph@9elements.com>

The MP2971/MP2973 use a custom 16bit register format for
SMBALERT_MASK which doesn't follow the PMBUS specification.

Map the PMBUS defined bits used by the common code onto the custom
format used by MPS and since the SMBALERT_MASK is currently never read
by common code only implement the mapping for write transactions.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>

---

Changes in V3:
1. Avoid precedence issues in Macro
2. Optimise macro.

Changes in V2:
1. Add/Update comment
2. Update SWAP define to include both variable.
3. Add defines for each bits of SMBALERT mask.
---
 drivers/hwmon/pmbus/mp2975.c | 77 ++++++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)


base-commit: 8debe3c1295ef36958dae77487eed9cf6584c008

Comments

Guenter Roeck March 18, 2024, 5:55 p.m. UTC | #1 
On 3/18/24 10:44, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@9elements.com>
> 
> The MP2971/MP2973 use a custom 16bit register format for
> SMBALERT_MASK which doesn't follow the PMBUS specification.
> 
> Map the PMBUS defined bits used by the common code onto the custom
> format used by MPS and since the SMBALERT_MASK is currently never read
> by common code only implement the mapping for write transactions.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> 

One of those "getting burned either way" thingies. We are not
supposed to apply patches while the commit window is open, but then
we get resends if we don't. Oh well.

Yes, I'll apply your patch, but only after the commit window closed.

Guenter
Guenter Roeck March 20, 2024, 5:53 p.m. UTC | #2 
On Mon, Mar 18, 2024 at 11:14:05PM +0530, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@9elements.com>
> 
> The MP2971/MP2973 use a custom 16bit register format for
> SMBALERT_MASK which doesn't follow the PMBUS specification.
> 
> Map the PMBUS defined bits used by the common code onto the custom
> format used by MPS and since the SMBALERT_MASK is currently never read
> by common code only implement the mapping for write transactions.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>

Applied to hwmon-next.

Please note that I'll push the branch after the commit window closed.

Thanks,
Guenter
diff mbox series

Patch

diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c
index e5fa10b3b8bc..953c02a2aeb5 100644
--- a/drivers/hwmon/pmbus/mp2975.c
+++ b/drivers/hwmon/pmbus/mp2975.c
@@ -392,6 +392,82 @@  static int mp2973_read_word_data(struct i2c_client *client, int page,
 	return ret;
 }
 
+static int mp2973_write_word_data(struct i2c_client *client, int page,
+				  int reg, u16 word)
+{
+	u8 target, mask;
+	int ret;
+
+	if (reg != PMBUS_SMBALERT_MASK)
+		return -ENODATA;
+
+	/*
+	 * Vendor-specific SMBALERT_MASK register with 16 maskable bits.
+	 */
+	ret = pmbus_read_word_data(client, 0, 0, PMBUS_SMBALERT_MASK);
+	if (ret < 0)
+		return ret;
+
+	target = word & 0xff;
+	mask = word >> 8;
+
+/*
+ * Set/Clear 'bit' in 'ret' based on condition followed by define for each bit in SMBALERT_MASK.
+ * Also bit 2 & 15 are reserved.
+ */
+#define SWAP(val, mask, cond, bit) (((mask) & (cond)) ? ((val) & ~BIT(bit)) : ((val) | BIT(bit)))
+
+#define MP2973_TEMP_OT		0
+#define MP2973_VIN_UVLO		1
+#define MP2973_VIN_OVP		3
+#define MP2973_MTP_FAULT	4
+#define MP2973_OTHER_COMM	5
+#define MP2973_MTP_BLK_TRIG	6
+#define MP2973_PACKET_ERROR	7
+#define MP2973_INVALID_DATA	8
+#define MP2973_INVALID_COMMAND	9
+#define MP2973_IOUT_OC_LV	10
+#define MP2973_IOUT_OC		11
+#define MP2973_VOUT_MAX_MIN_WARNING 12
+#define MP2973_VOLTAGE_UV	13
+#define MP2973_VOLTAGE_OV	14
+
+	switch (target) {
+	case PMBUS_STATUS_CML:
+		ret = SWAP(ret, mask, PB_CML_FAULT_INVALID_DATA, MP2973_INVALID_DATA);
+		ret = SWAP(ret, mask, PB_CML_FAULT_INVALID_COMMAND,  MP2973_INVALID_COMMAND);
+		ret = SWAP(ret, mask, PB_CML_FAULT_OTHER_COMM, MP2973_OTHER_COMM);
+		ret = SWAP(ret, mask, PB_CML_FAULT_PACKET_ERROR, MP2973_PACKET_ERROR);
+		break;
+	case PMBUS_STATUS_VOUT:
+		ret = SWAP(ret, mask, PB_VOLTAGE_UV_FAULT, MP2973_VOLTAGE_UV);
+		ret = SWAP(ret, mask, PB_VOLTAGE_OV_FAULT, MP2973_VOLTAGE_OV);
+		break;
+	case PMBUS_STATUS_IOUT:
+		ret = SWAP(ret, mask, PB_IOUT_OC_FAULT, MP2973_IOUT_OC);
+		ret = SWAP(ret, mask, PB_IOUT_OC_LV_FAULT, MP2973_IOUT_OC_LV);
+		break;
+	case PMBUS_STATUS_TEMPERATURE:
+		ret = SWAP(ret, mask, PB_TEMP_OT_FAULT, MP2973_TEMP_OT);
+		break;
+	/*
+	 * Map remaining bits to MFR specific to let the PMBUS core mask
+	 * those bits by default.
+	 */
+	case PMBUS_STATUS_MFR_SPECIFIC:
+		ret = SWAP(ret, mask, BIT(1), MP2973_VIN_UVLO);
+		ret = SWAP(ret, mask, BIT(3), MP2973_VIN_OVP);
+		ret = SWAP(ret, mask, BIT(4), MP2973_MTP_FAULT);
+		ret = SWAP(ret, mask, BIT(6), MP2973_MTP_BLK_TRIG);
+		break;
+	default:
+		return 0;
+	}
+#undef SWAP
+
+	return pmbus_write_word_data(client, 0, PMBUS_SMBALERT_MASK, ret);
+}
+
 static int mp2975_read_word_data(struct i2c_client *client, int page,
 				 int phase, int reg)
 {
@@ -907,6 +983,7 @@  static struct pmbus_driver_info mp2973_info = {
 		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT |
 		PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
 	.read_word_data = mp2973_read_word_data,
+	.write_word_data = mp2973_write_word_data,
 #if IS_ENABLED(CONFIG_SENSORS_MP2975_REGULATOR)
 	.num_regulators = 1,
 	.reg_desc = mp2975_reg_desc,