| Message ID | 20240322135117.195489-2-armbru@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | qapi/migration: Doc fixes | expand |
Markus Armbruster <armbru@redhat.com> writes: > MigrateSetParameters is about setting parameters, and > MigrationParameters is about querying them. Their documentation of > @tls-creds and @tls-hostname has residual damage from a failed attempt > at de-duplicating them (see commit de63ab61241 "migrate: Share common > MigrationParameters struct" and commit 1bda8b3c695 "migration: Unshare > MigrationParameters struct for now"). > > MigrateSetParameters documentation issues: > > * It claims plain text mode "was reported by omitting tls-creds" > before 2.9. MigrateSetParameters is not used for reporting, so this > is misleading. Delete. > > * It similarly claims hostname defaulting to migration URI "was > reported by omitting tls-hostname" before 2.9. Delete as well. > > Rephrase the remaining @tls-hostname contents for clarity. > > Enum MigrationParameter mirrors the members of struct > MigrateSetParameters. Differences to MigrateSetParameters's member > documentation are pointless. Copy the new text to MigrationParameter. > > MigrationParameters documentation issues: > > * @tls-creds runs the two last sentences together without punctuation. > Fix that. > > * Much of the contents on @tls-hostname only applies to setting > parameters, resulting in confusion. Replace by a suitable abridged > version of the new MigrateSetParameters text, and a note on > @tls-hostname omission in 2.8. > > Additional damage is due to flawed doc fix commit > 66fcb9d651d (qapi/migration: Add missing tls-authz documentation): > since it copied the missing MigrateSetParameters text from > MigrationParameters instead of MigrationParameter, the part on > recreating @tls-authz on the fly is missing. Copy that, too. > > Signed-off-by: Markus Armbruster <armbru@redhat.com> > --- > qapi/migration.json | 63 +++++++++++++++++++++++---------------------- > 1 file changed, 32 insertions(+), 31 deletions(-) > > diff --git a/qapi/migration.json b/qapi/migration.json > index aa1b39bce1..cbcc6946eb 100644 > --- a/qapi/migration.json > +++ b/qapi/migration.json > @@ -809,16 +809,19 @@ > # for establishing a TLS connection over the migration data > # channel. On the outgoing side of the migration, the credentials > # must be for a 'client' endpoint, while for the incoming side the > -# credentials must be for a 'server' endpoint. Setting this will > -# enable TLS for all migrations. The default is unset, resulting > -# in unsecured migration at the QEMU level. (Since 2.7) > +# credentials must be for a 'server' endpoint. Setting this to a > +# non-empty string enables TLS for all migrations. An empty > +# string means that QEMU will use plain text mode for migration, > +# rather than TLS. (Since 2.7) > # > -# @tls-hostname: hostname of the target host for the migration. This > -# is required when using x509 based TLS credentials and the > -# migration URI does not already include a hostname. For example > -# if using fd: or exec: based migration, the hostname must be > -# provided so that the server's x509 certificate identity can be > -# validated. (Since 2.7) > +# @tls-hostname: migration target's hostname for validating the > +# server's x509 certificate identify. If empty, QEMU will use the identity > +# hostname from the migration URI, if any. A non-empty value is > +# required when using x509 based TLS credentials and the migration > +# URI does not include a hostname, such as fd: or exec: based > +# migration. (Since 2.7) > +# > +# Note: empty value works only since 2.9. > # > # @tls-authz: ID of the 'authz' object subclass that provides access > # control checking of the TLS x509 certificate distinguished name. > @@ -1006,22 +1009,22 @@ > # credentials must be for a 'server' endpoint. Setting this to a > # non-empty string enables TLS for all migrations. An empty > # string means that QEMU will use plain text mode for migration, > -# rather than TLS (Since 2.9) Previously (since 2.7), this was > -# reported by omitting tls-creds instead. > +# rather than TLS. This is the default. (Since 2.7) > # > -# @tls-hostname: hostname of the target host for the migration. This > -# is required when using x509 based TLS credentials and the > -# migration URI does not already include a hostname. For example > -# if using fd: or exec: based migration, the hostname must be > -# provided so that the server's x509 certificate identity can be > -# validated. (Since 2.7) An empty string means that QEMU will use > -# the hostname associated with the migration URI, if any. (Since > -# 2.9) Previously (since 2.7), this was reported by omitting > -# tls-hostname instead. > +# @tls-hostname: migration target's hostname for validating the > +# server's x509 certificate identify. If empty, QEMU will use the same here > +# hostname from the migration URI, if any. A non-empty value is > +# required when using x509 based TLS credentials and the migration > +# URI does not include a hostname, such as fd: or exec: based > +# migration. (Since 2.7) > +# > +# Note: empty value works only since 2.9. > # > # @tls-authz: ID of the 'authz' object subclass that provides access > # control checking of the TLS x509 certificate distinguished name. > -# (Since 4.0) > +# This object is only resolved at time of use, so can be deleted > +# and recreated on the fly while the migration server is active. > +# If missing, it will default to denying access (Since 4.0) > # > # @max-bandwidth: to set maximum speed for migration. maximum speed > # in bytes per second. (Since 2.8) > @@ -1240,17 +1243,15 @@ > # must be for a 'client' endpoint, while for the incoming side the > # credentials must be for a 'server' endpoint. An empty string > # means that QEMU will use plain text mode for migration, rather > -# than TLS (Since 2.7) Note: 2.8 reports this by omitting > -# tls-creds instead. > +# than TLS. (Since 2.7) > # > -# @tls-hostname: hostname of the target host for the migration. This > -# is required when using x509 based TLS credentials and the > -# migration URI does not already include a hostname. For example > -# if using fd: or exec: based migration, the hostname must be > -# provided so that the server's x509 certificate identity can be > -# validated. (Since 2.7) An empty string means that QEMU will use > -# the hostname associated with the migration URI, if any. (Since > -# 2.9) Note: 2.8 reports this by omitting tls-hostname instead. > +# Note: 2.8 omits empty @tls-creds instead. > +# > +# @tls-hostname: migration target's hostname for validating the > +# server's x509 certificate identify. If empty, QEMU will use the and here > +# hostname from the migration URI, if any. (Since 2.7) > +# > +# Note: 2.8 omits empty @tls-hostname instead. > # > # @tls-authz: ID of the 'authz' object subclass that provides access > # control checking of the TLS x509 certificate distinguished name.
Fabiano Rosas <farosas@suse.de> writes: > Markus Armbruster <armbru@redhat.com> writes: > >> MigrateSetParameters is about setting parameters, and >> MigrationParameters is about querying them. Their documentation of >> @tls-creds and @tls-hostname has residual damage from a failed attempt >> at de-duplicating them (see commit de63ab61241 "migrate: Share common >> MigrationParameters struct" and commit 1bda8b3c695 "migration: Unshare >> MigrationParameters struct for now"). >> >> MigrateSetParameters documentation issues: >> >> * It claims plain text mode "was reported by omitting tls-creds" >> before 2.9. MigrateSetParameters is not used for reporting, so this >> is misleading. Delete. >> >> * It similarly claims hostname defaulting to migration URI "was >> reported by omitting tls-hostname" before 2.9. Delete as well. >> >> Rephrase the remaining @tls-hostname contents for clarity. >> >> Enum MigrationParameter mirrors the members of struct >> MigrateSetParameters. Differences to MigrateSetParameters's member >> documentation are pointless. Copy the new text to MigrationParameter. >> >> MigrationParameters documentation issues: >> >> * @tls-creds runs the two last sentences together without punctuation. >> Fix that. >> >> * Much of the contents on @tls-hostname only applies to setting >> parameters, resulting in confusion. Replace by a suitable abridged >> version of the new MigrateSetParameters text, and a note on >> @tls-hostname omission in 2.8. >> >> Additional damage is due to flawed doc fix commit >> 66fcb9d651d (qapi/migration: Add missing tls-authz documentation): >> since it copied the missing MigrateSetParameters text from >> MigrationParameters instead of MigrationParameter, the part on >> recreating @tls-authz on the fly is missing. Copy that, too. >> >> Signed-off-by: Markus Armbruster <armbru@redhat.com> >> --- >> qapi/migration.json | 63 +++++++++++++++++++++++---------------------- >> 1 file changed, 32 insertions(+), 31 deletions(-) >> >> diff --git a/qapi/migration.json b/qapi/migration.json >> index aa1b39bce1..cbcc6946eb 100644 >> --- a/qapi/migration.json >> +++ b/qapi/migration.json >> @@ -809,16 +809,19 @@ >> # for establishing a TLS connection over the migration data >> # channel. On the outgoing side of the migration, the credentials >> # must be for a 'client' endpoint, while for the incoming side the >> -# credentials must be for a 'server' endpoint. Setting this will >> -# enable TLS for all migrations. The default is unset, resulting >> -# in unsecured migration at the QEMU level. (Since 2.7) >> +# credentials must be for a 'server' endpoint. Setting this to a >> +# non-empty string enables TLS for all migrations. An empty >> +# string means that QEMU will use plain text mode for migration, >> +# rather than TLS. (Since 2.7) >> # >> -# @tls-hostname: hostname of the target host for the migration. This >> -# is required when using x509 based TLS credentials and the >> -# migration URI does not already include a hostname. For example >> -# if using fd: or exec: based migration, the hostname must be >> -# provided so that the server's x509 certificate identity can be >> -# validated. (Since 2.7) >> +# @tls-hostname: migration target's hostname for validating the >> +# server's x509 certificate identify. If empty, QEMU will use the > > identity ACK! Also the other two copies you noted. Thanks! [...]
diff --git a/qapi/migration.json b/qapi/migration.json index aa1b39bce1..cbcc6946eb 100644 --- a/qapi/migration.json +++ b/qapi/migration.json @@ -809,16 +809,19 @@ # for establishing a TLS connection over the migration data # channel. On the outgoing side of the migration, the credentials # must be for a 'client' endpoint, while for the incoming side the -# credentials must be for a 'server' endpoint. Setting this will -# enable TLS for all migrations. The default is unset, resulting -# in unsecured migration at the QEMU level. (Since 2.7) +# credentials must be for a 'server' endpoint. Setting this to a +# non-empty string enables TLS for all migrations. An empty +# string means that QEMU will use plain text mode for migration, +# rather than TLS. (Since 2.7) # -# @tls-hostname: hostname of the target host for the migration. This -# is required when using x509 based TLS credentials and the -# migration URI does not already include a hostname. For example -# if using fd: or exec: based migration, the hostname must be -# provided so that the server's x509 certificate identity can be -# validated. (Since 2.7) +# @tls-hostname: migration target's hostname for validating the +# server's x509 certificate identify. If empty, QEMU will use the +# hostname from the migration URI, if any. A non-empty value is +# required when using x509 based TLS credentials and the migration +# URI does not include a hostname, such as fd: or exec: based +# migration. (Since 2.7) +# +# Note: empty value works only since 2.9. # # @tls-authz: ID of the 'authz' object subclass that provides access # control checking of the TLS x509 certificate distinguished name. @@ -1006,22 +1009,22 @@ # credentials must be for a 'server' endpoint. Setting this to a # non-empty string enables TLS for all migrations. An empty # string means that QEMU will use plain text mode for migration, -# rather than TLS (Since 2.9) Previously (since 2.7), this was -# reported by omitting tls-creds instead. +# rather than TLS. This is the default. (Since 2.7) # -# @tls-hostname: hostname of the target host for the migration. This -# is required when using x509 based TLS credentials and the -# migration URI does not already include a hostname. For example -# if using fd: or exec: based migration, the hostname must be -# provided so that the server's x509 certificate identity can be -# validated. (Since 2.7) An empty string means that QEMU will use -# the hostname associated with the migration URI, if any. (Since -# 2.9) Previously (since 2.7), this was reported by omitting -# tls-hostname instead. +# @tls-hostname: migration target's hostname for validating the +# server's x509 certificate identify. If empty, QEMU will use the +# hostname from the migration URI, if any. A non-empty value is +# required when using x509 based TLS credentials and the migration +# URI does not include a hostname, such as fd: or exec: based +# migration. (Since 2.7) +# +# Note: empty value works only since 2.9. # # @tls-authz: ID of the 'authz' object subclass that provides access # control checking of the TLS x509 certificate distinguished name. -# (Since 4.0) +# This object is only resolved at time of use, so can be deleted +# and recreated on the fly while the migration server is active. +# If missing, it will default to denying access (Since 4.0) # # @max-bandwidth: to set maximum speed for migration. maximum speed # in bytes per second. (Since 2.8) @@ -1240,17 +1243,15 @@ # must be for a 'client' endpoint, while for the incoming side the # credentials must be for a 'server' endpoint. An empty string # means that QEMU will use plain text mode for migration, rather -# than TLS (Since 2.7) Note: 2.8 reports this by omitting -# tls-creds instead. +# than TLS. (Since 2.7) # -# @tls-hostname: hostname of the target host for the migration. This -# is required when using x509 based TLS credentials and the -# migration URI does not already include a hostname. For example -# if using fd: or exec: based migration, the hostname must be -# provided so that the server's x509 certificate identity can be -# validated. (Since 2.7) An empty string means that QEMU will use -# the hostname associated with the migration URI, if any. (Since -# 2.9) Note: 2.8 reports this by omitting tls-hostname instead. +# Note: 2.8 omits empty @tls-creds instead. +# +# @tls-hostname: migration target's hostname for validating the +# server's x509 certificate identify. If empty, QEMU will use the +# hostname from the migration URI, if any. (Since 2.7) +# +# Note: 2.8 omits empty @tls-hostname instead. # # @tls-authz: ID of the 'authz' object subclass that provides access # control checking of the TLS x509 certificate distinguished name.
MigrateSetParameters is about setting parameters, and MigrationParameters is about querying them. Their documentation of @tls-creds and @tls-hostname has residual damage from a failed attempt at de-duplicating them (see commit de63ab61241 "migrate: Share common MigrationParameters struct" and commit 1bda8b3c695 "migration: Unshare MigrationParameters struct for now"). MigrateSetParameters documentation issues: * It claims plain text mode "was reported by omitting tls-creds" before 2.9. MigrateSetParameters is not used for reporting, so this is misleading. Delete. * It similarly claims hostname defaulting to migration URI "was reported by omitting tls-hostname" before 2.9. Delete as well. Rephrase the remaining @tls-hostname contents for clarity. Enum MigrationParameter mirrors the members of struct MigrateSetParameters. Differences to MigrateSetParameters's member documentation are pointless. Copy the new text to MigrationParameter. MigrationParameters documentation issues: * @tls-creds runs the two last sentences together without punctuation. Fix that. * Much of the contents on @tls-hostname only applies to setting parameters, resulting in confusion. Replace by a suitable abridged version of the new MigrateSetParameters text, and a note on @tls-hostname omission in 2.8. Additional damage is due to flawed doc fix commit 66fcb9d651d (qapi/migration: Add missing tls-authz documentation): since it copied the missing MigrateSetParameters text from MigrationParameters instead of MigrationParameter, the part on recreating @tls-authz on the fly is missing. Copy that, too. Signed-off-by: Markus Armbruster <armbru@redhat.com> --- qapi/migration.json | 63 +++++++++++++++++++++++---------------------- 1 file changed, 32 insertions(+), 31 deletions(-)