| Message ID | 20240320001141.16560-1-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | mtd: rawnand: qcom: Fix broken misc_cmd_type in exec_op | expand |
Hi Christian, ansuelsmth@gmail.com wrote on Wed, 20 Mar 2024 01:11:39 +0100: > misc_cmd_type in exec_op have multiple problems. With commit a82990c8a409 > ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") it was > reworked and generalized but actually dropped the handling of the > RESET_DEVICE command. > > The rework itself was correct with supporting case where a single misc > command is handled, but became problematic by the addition of exiting > early if we didn't had an ERASE or an OP_PROGRAM_PAGE operation. > > Also additional logic was added without clear explaination causing the > erase command to be broken on testing it on a ipq806x nandc. > > Add some additional logic to restore RESET_DEVICE command handling and > fix erase command. > > Fixes: a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") > Cc: stable@vger.kernel.org > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > drivers/mtd/nand/raw/qcom_nandc.c | 7 +++---- > 1 file changed, 3 insertions(+), 4 deletions(-) > > diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c > index b079605c84d3..b8cff9240b28 100644 > --- a/drivers/mtd/nand/raw/qcom_nandc.c > +++ b/drivers/mtd/nand/raw/qcom_nandc.c > @@ -2815,7 +2815,7 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub > host->cfg0_raw & ~(7 << CW_PER_PAGE)); > nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw); > instrs = 3; > - } else { > + } else if (q_op.cmd_reg != OP_RESET_DEVICE) { > return 0; > } > > @@ -2830,9 +2830,8 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub > nandc_set_reg(chip, NAND_EXEC_CMD, 1); > > write_reg_dma(nandc, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL); > - (q_op.cmd_reg == OP_BLOCK_ERASE) ? write_reg_dma(nandc, NAND_DEV0_CFG0, > - 2, NAND_BAM_NEXT_SGL) : read_reg_dma(nandc, > - NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); > + if (q_op.cmd_reg == OP_BLOCK_ERASE) > + write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL); Ugh. How did that went through... I don't want to get into the details of this controller, but the fix looks legitimate. > write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); > read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); Thanks, Miquèl
On Wed, Mar 20, 2024 at 01:11:39AM +0100, Christian Marangi wrote: > misc_cmd_type in exec_op have multiple problems. With commit a82990c8a409 > ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") it was > reworked and generalized but actually dropped the handling of the > RESET_DEVICE command. > > The rework itself was correct with supporting case where a single misc > command is handled, but became problematic by the addition of exiting > early if we didn't had an ERASE or an OP_PROGRAM_PAGE operation. > > Also additional logic was added without clear explaination causing the > erase command to be broken on testing it on a ipq806x nandc. > Interesting. I believe Alam tested the rework on IPQ platforms and not sure how it got missed. > Add some additional logic to restore RESET_DEVICE command handling and > fix erase command. > This sounds like two independent fixes, no? Please split them into separate patches. - Mani > Fixes: a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") > Cc: stable@vger.kernel.org > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > drivers/mtd/nand/raw/qcom_nandc.c | 7 +++---- > 1 file changed, 3 insertions(+), 4 deletions(-) > > diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c > index b079605c84d3..b8cff9240b28 100644 > --- a/drivers/mtd/nand/raw/qcom_nandc.c > +++ b/drivers/mtd/nand/raw/qcom_nandc.c > @@ -2815,7 +2815,7 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub > host->cfg0_raw & ~(7 << CW_PER_PAGE)); > nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw); > instrs = 3; > - } else { > + } else if (q_op.cmd_reg != OP_RESET_DEVICE) { > return 0; > } > > @@ -2830,9 +2830,8 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub > nandc_set_reg(chip, NAND_EXEC_CMD, 1); > > write_reg_dma(nandc, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL); > - (q_op.cmd_reg == OP_BLOCK_ERASE) ? write_reg_dma(nandc, NAND_DEV0_CFG0, > - 2, NAND_BAM_NEXT_SGL) : read_reg_dma(nandc, > - NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); > + if (q_op.cmd_reg == OP_BLOCK_ERASE) > + write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL); > > write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); > read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); > -- > 2.43.0 >
Hi, manivannan.sadhasivam@linaro.org wrote on Fri, 22 Mar 2024 20:35:10 +0530: > On Wed, Mar 20, 2024 at 01:11:39AM +0100, Christian Marangi wrote: > > misc_cmd_type in exec_op have multiple problems. With commit a82990c8a409 > > ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") it was > > reworked and generalized but actually dropped the handling of the > > RESET_DEVICE command. > > > > The rework itself was correct with supporting case where a single misc > > command is handled, but became problematic by the addition of exiting > > early if we didn't had an ERASE or an OP_PROGRAM_PAGE operation. > > > > Also additional logic was added without clear explaination causing the > > erase command to be broken on testing it on a ipq806x nandc. > > > > Interesting. I believe Alam tested the rework on IPQ platforms and not sure how > it got missed. > > > Add some additional logic to restore RESET_DEVICE command handling and > > fix erase command. > > > > This sounds like two independent fixes, no? Please split them into separate > patches. Might be split indeed. @Christian, do you plan on sending a v2? Thanks, Miquèl
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index b079605c84d3..b8cff9240b28 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -2815,7 +2815,7 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub host->cfg0_raw & ~(7 << CW_PER_PAGE)); nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw); instrs = 3; - } else { + } else if (q_op.cmd_reg != OP_RESET_DEVICE) { return 0; } @@ -2830,9 +2830,8 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub nandc_set_reg(chip, NAND_EXEC_CMD, 1); write_reg_dma(nandc, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL); - (q_op.cmd_reg == OP_BLOCK_ERASE) ? write_reg_dma(nandc, NAND_DEV0_CFG0, - 2, NAND_BAM_NEXT_SGL) : read_reg_dma(nandc, - NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); + if (q_op.cmd_reg == OP_BLOCK_ERASE) + write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL); write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
misc_cmd_type in exec_op have multiple problems. With commit a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") it was reworked and generalized but actually dropped the handling of the RESET_DEVICE command. The rework itself was correct with supporting case where a single misc command is handled, but became problematic by the addition of exiting early if we didn't had an ERASE or an OP_PROGRAM_PAGE operation. Also additional logic was added without clear explaination causing the erase command to be broken on testing it on a ipq806x nandc. Add some additional logic to restore RESET_DEVICE command handling and fix erase command. Fixes: a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- drivers/mtd/nand/raw/qcom_nandc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)