diff mbox series

[v2] backlight: lp8788: Drop support for platform data

Message ID 20240314113529.923708-2-u.kleine-koenig@pengutronix.de (mailing list archive)
State Handled Elsewhere
Headers show
Series [v2] backlight: lp8788: Drop support for platform data | expand

Commit Message

Uwe Kleine-König March 14, 2024, 11:35 a.m. UTC 
The backlight driver supports getting passed platform data. However this
isn't used. This allows to remove quite some dead code from the driver
because bl->pdata is always NULL, and so bl->mode is always
LP8788_BL_REGISTER_ONLY.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
Changes since (implicit) v1 archived at
https://lkml.kernel.org/20240313124828.861731-2-u.kleine-koenig@pengutronix.de:

 - Also drop struct pwm_device *pwm member from struct lp8788_bl

I'm surprised that this didn't fail to compile ...

Best regards
Uwe

 drivers/video/backlight/lp8788_bl.c | 151 ++--------------------------
 include/linux/mfd/lp8788.h          |  36 -------
 2 files changed, 8 insertions(+), 179 deletions(-)


base-commit: e8f897f4afef0031fe618a8e94127a0934896aba

Comments

Daniel Thompson March 22, 2024, 1:42 p.m. UTC | #1 
On Thu, Mar 14, 2024 at 12:35:28PM +0100, Uwe Kleine-König wrote:
> The backlight driver supports getting passed platform data. However this
> isn't used. This allows to remove quite some dead code from the driver
> because bl->pdata is always NULL, and so bl->mode is always
> LP8788_BL_REGISTER_ONLY.
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

I may be wrong but I think this driver can only be loaded manually
from userspace. On that basis its hugely likely that the entire driver is
dead code (along with the rest of the lp8788 drivers across
the kernel).

However, that's not an objection to this change:
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>


Daniel.


> ---
> Changes since (implicit) v1 archived at
> https://lkml.kernel.org/20240313124828.861731-2-u.kleine-koenig@pengutronix.de:
>
>  - Also drop struct pwm_device *pwm member from struct lp8788_bl
>
> I'm surprised that this didn't fail to compile ...
>
> Best regards
> Uwe
>
>  drivers/video/backlight/lp8788_bl.c | 151 ++--------------------------
>  include/linux/mfd/lp8788.h          |  36 -------
>  2 files changed, 8 insertions(+), 179 deletions(-)
>
> diff --git a/drivers/video/backlight/lp8788_bl.c b/drivers/video/backlight/lp8788_bl.c
> index d1a14b0db265..d173e93f6348 100644
> --- a/drivers/video/backlight/lp8788_bl.c
> +++ b/drivers/video/backlight/lp8788_bl.c
> @@ -12,7 +12,6 @@
>  #include <linux/mfd/lp8788.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
> -#include <linux/pwm.h>
>  #include <linux/slab.h>
>
>  /* Register address */
> @@ -31,149 +30,40 @@
>  #define MAX_BRIGHTNESS			127
>  #define DEFAULT_BL_NAME			"lcd-backlight"
>
> -struct lp8788_bl_config {
> -	enum lp8788_bl_ctrl_mode bl_mode;
> -	enum lp8788_bl_dim_mode dim_mode;
> -	enum lp8788_bl_full_scale_current full_scale;
> -	enum lp8788_bl_ramp_step rise_time;
> -	enum lp8788_bl_ramp_step fall_time;
> -	enum pwm_polarity pwm_pol;
> -};
> -
>  struct lp8788_bl {
>  	struct lp8788 *lp;
>  	struct backlight_device *bl_dev;
> -	struct lp8788_backlight_platform_data *pdata;
> -	enum lp8788_bl_ctrl_mode mode;
> -	struct pwm_device *pwm;
>  };
>
> -static struct lp8788_bl_config default_bl_config = {
> -	.bl_mode    = LP8788_BL_REGISTER_ONLY,
> -	.dim_mode   = LP8788_DIM_EXPONENTIAL,
> -	.full_scale = LP8788_FULLSCALE_1900uA,
> -	.rise_time  = LP8788_RAMP_8192us,
> -	.fall_time  = LP8788_RAMP_8192us,
> -	.pwm_pol    = PWM_POLARITY_NORMAL,
> -};
> -
> -static inline bool is_brightness_ctrl_by_pwm(enum lp8788_bl_ctrl_mode mode)
> -{
> -	return mode == LP8788_BL_COMB_PWM_BASED;
> -}
> -
> -static inline bool is_brightness_ctrl_by_register(enum lp8788_bl_ctrl_mode mode)
> -{
> -	return mode == LP8788_BL_REGISTER_ONLY ||
> -		mode == LP8788_BL_COMB_REGISTER_BASED;
> -}
> -
>  static int lp8788_backlight_configure(struct lp8788_bl *bl)
>  {
> -	struct lp8788_backlight_platform_data *pdata = bl->pdata;
> -	struct lp8788_bl_config *cfg = &default_bl_config;
>  	int ret;
>  	u8 val;
>
> -	/*
> -	 * Update chip configuration if platform data exists,
> -	 * otherwise use the default settings.
> -	 */
> -	if (pdata) {
> -		cfg->bl_mode    = pdata->bl_mode;
> -		cfg->dim_mode   = pdata->dim_mode;
> -		cfg->full_scale = pdata->full_scale;
> -		cfg->rise_time  = pdata->rise_time;
> -		cfg->fall_time  = pdata->fall_time;
> -		cfg->pwm_pol    = pdata->pwm_pol;
> -	}
> -
>  	/* Brightness ramp up/down */
> -	val = (cfg->rise_time << LP8788_BL_RAMP_RISE_SHIFT) | cfg->fall_time;
> +	val = (LP8788_RAMP_8192us << LP8788_BL_RAMP_RISE_SHIFT) | LP8788_RAMP_8192us;
>  	ret = lp8788_write_byte(bl->lp, LP8788_BL_RAMP, val);
>  	if (ret)
>  		return ret;
>
>  	/* Fullscale current setting */
> -	val = (cfg->full_scale << LP8788_BL_FULLSCALE_SHIFT) |
> -		(cfg->dim_mode << LP8788_BL_DIM_MODE_SHIFT);
> +	val = (LP8788_FULLSCALE_1900uA << LP8788_BL_FULLSCALE_SHIFT) |
> +		(LP8788_DIM_EXPONENTIAL << LP8788_BL_DIM_MODE_SHIFT);
>
>  	/* Brightness control mode */
> -	switch (cfg->bl_mode) {
> -	case LP8788_BL_REGISTER_ONLY:
> -		val |= LP8788_BL_EN;
> -		break;
> -	case LP8788_BL_COMB_PWM_BASED:
> -	case LP8788_BL_COMB_REGISTER_BASED:
> -		val |= LP8788_BL_EN | LP8788_BL_PWM_INPUT_EN |
> -			(cfg->pwm_pol << LP8788_BL_PWM_POLARITY_SHIFT);
> -		break;
> -	default:
> -		dev_err(bl->lp->dev, "invalid mode: %d\n", cfg->bl_mode);
> -		return -EINVAL;
> -	}
> -
> -	bl->mode = cfg->bl_mode;
> +	val |= LP8788_BL_EN;
>
>  	return lp8788_write_byte(bl->lp, LP8788_BL_CONFIG, val);
>  }
>
> -static void lp8788_pwm_ctrl(struct lp8788_bl *bl, int br, int max_br)
> -{
> -	unsigned int period;
> -	unsigned int duty;
> -	struct device *dev;
> -	struct pwm_device *pwm;
> -
> -	if (!bl->pdata)
> -		return;
> -
> -	period = bl->pdata->period_ns;
> -	duty = br * period / max_br;
> -	dev = bl->lp->dev;
> -
> -	/* request PWM device with the consumer name */
> -	if (!bl->pwm) {
> -		pwm = devm_pwm_get(dev, LP8788_DEV_BACKLIGHT);
> -		if (IS_ERR(pwm)) {
> -			dev_err(dev, "can not get PWM device\n");
> -			return;
> -		}
> -
> -		bl->pwm = pwm;
> -
> -		/*
> -		 * FIXME: pwm_apply_args() should be removed when switching to
> -		 * the atomic PWM API.
> -		 */
> -		pwm_apply_args(pwm);
> -	}
> -
> -	pwm_config(bl->pwm, duty, period);
> -	if (duty)
> -		pwm_enable(bl->pwm);
> -	else
> -		pwm_disable(bl->pwm);
> -}
> -
>  static int lp8788_bl_update_status(struct backlight_device *bl_dev)
>  {
>  	struct lp8788_bl *bl = bl_get_data(bl_dev);
> -	enum lp8788_bl_ctrl_mode mode = bl->mode;
>
>  	if (bl_dev->props.state & BL_CORE_SUSPENDED)
>  		bl_dev->props.brightness = 0;
>
> -	if (is_brightness_ctrl_by_pwm(mode)) {
> -		int brt = bl_dev->props.brightness;
> -		int max = bl_dev->props.max_brightness;
> -
> -		lp8788_pwm_ctrl(bl, brt, max);
> -	} else if (is_brightness_ctrl_by_register(mode)) {
> -		u8 brt = bl_dev->props.brightness;
> -
> -		lp8788_write_byte(bl->lp, LP8788_BL_BRIGHTNESS, brt);
> -	}
> +	lp8788_write_byte(bl->lp, LP8788_BL_BRIGHTNESS, bl_dev->props.brightness);
>
>  	return 0;
>  }
> @@ -187,29 +77,15 @@ static int lp8788_backlight_register(struct lp8788_bl *bl)
>  {
>  	struct backlight_device *bl_dev;
>  	struct backlight_properties props;
> -	struct lp8788_backlight_platform_data *pdata = bl->pdata;
> -	int init_brt;
> -	char *name;
>
>  	props.type = BACKLIGHT_PLATFORM;
>  	props.max_brightness = MAX_BRIGHTNESS;
>
>  	/* Initial brightness */
> -	if (pdata)
> -		init_brt = min_t(int, pdata->initial_brightness,
> -				props.max_brightness);
> -	else
> -		init_brt = 0;
> -
> -	props.brightness = init_brt;
> +	props.brightness = 0;
>
>  	/* Backlight device name */
> -	if (!pdata || !pdata->name)
> -		name = DEFAULT_BL_NAME;
> -	else
> -		name = pdata->name;
> -
> -	bl_dev = backlight_device_register(name, bl->lp->dev, bl,
> +	bl_dev = backlight_device_register(DEFAULT_BL_NAME, bl->lp->dev, bl,
>  				       &lp8788_bl_ops, &props);
>  	if (IS_ERR(bl_dev))
>  		return PTR_ERR(bl_dev);
> @@ -229,16 +105,7 @@ static void lp8788_backlight_unregister(struct lp8788_bl *bl)
>  static ssize_t lp8788_get_bl_ctl_mode(struct device *dev,
>  				     struct device_attribute *attr, char *buf)
>  {
> -	struct lp8788_bl *bl = dev_get_drvdata(dev);
> -	enum lp8788_bl_ctrl_mode mode = bl->mode;
> -	char *strmode;
> -
> -	if (is_brightness_ctrl_by_pwm(mode))
> -		strmode = "PWM based";
> -	else if (is_brightness_ctrl_by_register(mode))
> -		strmode = "Register based";
> -	else
> -		strmode = "Invalid mode";
> +	const char *strmode = "Register based";
>
>  	return scnprintf(buf, PAGE_SIZE, "%s\n", strmode);
>  }
> @@ -265,8 +132,6 @@ static int lp8788_backlight_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>
>  	bl->lp = lp;
> -	if (lp->pdata)
> -		bl->pdata = lp->pdata->bl_pdata;
>
>  	platform_set_drvdata(pdev, bl);
>
> diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h
> index 3d5c480d58ea..46d8fa779134 100644
> --- a/include/linux/mfd/lp8788.h
> +++ b/include/linux/mfd/lp8788.h
> @@ -12,7 +12,6 @@
>
>  #include <linux/gpio.h>
>  #include <linux/irqdomain.h>
> -#include <linux/pwm.h>
>  #include <linux/regmap.h>
>
>  #define LP8788_DEV_BUCK		"lp8788-buck"
> @@ -88,12 +87,6 @@ enum lp8788_charger_event {
>  	CHARGER_DETECTED,
>  };
>
> -enum lp8788_bl_ctrl_mode {
> -	LP8788_BL_REGISTER_ONLY,
> -	LP8788_BL_COMB_PWM_BASED,	/* PWM + I2C, changed by PWM input */
> -	LP8788_BL_COMB_REGISTER_BASED,	/* PWM + I2C, changed by I2C */
> -};
> -
>  enum lp8788_bl_dim_mode {
>  	LP8788_DIM_EXPONENTIAL,
>  	LP8788_DIM_LINEAR,
> @@ -206,31 +199,6 @@ struct lp8788_charger_platform_data {
>  				enum lp8788_charger_event event);
>  };
>
> -/*
> - * struct lp8788_backlight_platform_data
> - * @name                  : backlight driver name. (default: "lcd-backlight")
> - * @initial_brightness    : initial value of backlight brightness
> - * @bl_mode               : brightness control by pwm or lp8788 register
> - * @dim_mode              : dimming mode selection
> - * @full_scale            : full scale current setting
> - * @rise_time             : brightness ramp up step time
> - * @fall_time             : brightness ramp down step time
> - * @pwm_pol               : pwm polarity setting when bl_mode is pwm based
> - * @period_ns             : platform specific pwm period value. unit is nano.
> -			    Only valid when bl_mode is LP8788_BL_COMB_PWM_BASED
> - */
> -struct lp8788_backlight_platform_data {
> -	char *name;
> -	int initial_brightness;
> -	enum lp8788_bl_ctrl_mode bl_mode;
> -	enum lp8788_bl_dim_mode dim_mode;
> -	enum lp8788_bl_full_scale_current full_scale;
> -	enum lp8788_bl_ramp_step rise_time;
> -	enum lp8788_bl_ramp_step fall_time;
> -	enum pwm_polarity pwm_pol;
> -	unsigned int period_ns;
> -};
> -
>  /*
>   * struct lp8788_led_platform_data
>   * @name         : led driver name. (default: "keyboard-backlight")
> @@ -272,7 +240,6 @@ struct lp8788_vib_platform_data {
>   * @buck2_dvs    : gpio configurations for buck2 dvs
>   * @chg_pdata    : platform data for charger driver
>   * @alarm_sel    : rtc alarm selection (1 or 2)
> - * @bl_pdata     : configurable data for backlight driver
>   * @led_pdata    : configurable data for led driver
>   * @vib_pdata    : configurable data for vibrator driver
>   * @adc_pdata    : iio map data for adc driver
> @@ -294,9 +261,6 @@ struct lp8788_platform_data {
>  	/* rtc alarm */
>  	enum lp8788_alarm_sel alarm_sel;
>
> -	/* backlight */
> -	struct lp8788_backlight_platform_data *bl_pdata;
> -
>  	/* current sinks */
>  	struct lp8788_led_platform_data *led_pdata;
>  	struct lp8788_vib_platform_data *vib_pdata;
>
> base-commit: e8f897f4afef0031fe618a8e94127a0934896aba
> --
> 2.43.0
>
Lee Jones March 27, 2024, 2:47 p.m. UTC | #2 
On Thu, 14 Mar 2024, Uwe Kleine-König wrote:

> The backlight driver supports getting passed platform data. However this
> isn't used. This allows to remove quite some dead code from the driver
> because bl->pdata is always NULL, and so bl->mode is always
> LP8788_BL_REGISTER_ONLY.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
> Changes since (implicit) v1 archived at
> https://lkml.kernel.org/20240313124828.861731-2-u.kleine-koenig@pengutronix.de:
> 
>  - Also drop struct pwm_device *pwm member from struct lp8788_bl
> 
> I'm surprised that this didn't fail to compile ...
> 
> Best regards
> Uwe
> 
>  drivers/video/backlight/lp8788_bl.c | 151 ++--------------------------
>  include/linux/mfd/lp8788.h          |  36 -------
>  2 files changed, 8 insertions(+), 179 deletions(-)

Does not apply.

Please rebase onto v6.9-rc1 or for-backlight-next.
Lee Jones April 11, 2024, 11:39 a.m. UTC | #3 
On Thu, 14 Mar 2024 12:35:28 +0100, Uwe Kleine-König wrote:
> The backlight driver supports getting passed platform data. However this
> isn't used. This allows to remove quite some dead code from the driver
> because bl->pdata is always NULL, and so bl->mode is always
> LP8788_BL_REGISTER_ONLY.
> 
> 

Applied, thanks!

[1/1] backlight: lp8788: Drop support for platform data
      commit: 150476e60a80ebb93d49aae7b636934eb04b83d2

--
Lee Jones [李琼斯]
diff mbox series

Patch

diff --git a/drivers/video/backlight/lp8788_bl.c b/drivers/video/backlight/lp8788_bl.c
index d1a14b0db265..d173e93f6348 100644
--- a/drivers/video/backlight/lp8788_bl.c
+++ b/drivers/video/backlight/lp8788_bl.c
@@ -12,7 +12,6 @@ 
 #include <linux/mfd/lp8788.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/pwm.h>
 #include <linux/slab.h>
 
 /* Register address */
@@ -31,149 +30,40 @@ 
 #define MAX_BRIGHTNESS			127
 #define DEFAULT_BL_NAME			"lcd-backlight"
 
-struct lp8788_bl_config {
-	enum lp8788_bl_ctrl_mode bl_mode;
-	enum lp8788_bl_dim_mode dim_mode;
-	enum lp8788_bl_full_scale_current full_scale;
-	enum lp8788_bl_ramp_step rise_time;
-	enum lp8788_bl_ramp_step fall_time;
-	enum pwm_polarity pwm_pol;
-};
-
 struct lp8788_bl {
 	struct lp8788 *lp;
 	struct backlight_device *bl_dev;
-	struct lp8788_backlight_platform_data *pdata;
-	enum lp8788_bl_ctrl_mode mode;
-	struct pwm_device *pwm;
 };
 
-static struct lp8788_bl_config default_bl_config = {
-	.bl_mode    = LP8788_BL_REGISTER_ONLY,
-	.dim_mode   = LP8788_DIM_EXPONENTIAL,
-	.full_scale = LP8788_FULLSCALE_1900uA,
-	.rise_time  = LP8788_RAMP_8192us,
-	.fall_time  = LP8788_RAMP_8192us,
-	.pwm_pol    = PWM_POLARITY_NORMAL,
-};
-
-static inline bool is_brightness_ctrl_by_pwm(enum lp8788_bl_ctrl_mode mode)
-{
-	return mode == LP8788_BL_COMB_PWM_BASED;
-}
-
-static inline bool is_brightness_ctrl_by_register(enum lp8788_bl_ctrl_mode mode)
-{
-	return mode == LP8788_BL_REGISTER_ONLY ||
-		mode == LP8788_BL_COMB_REGISTER_BASED;
-}
-
 static int lp8788_backlight_configure(struct lp8788_bl *bl)
 {
-	struct lp8788_backlight_platform_data *pdata = bl->pdata;
-	struct lp8788_bl_config *cfg = &default_bl_config;
 	int ret;
 	u8 val;
 
-	/*
-	 * Update chip configuration if platform data exists,
-	 * otherwise use the default settings.
-	 */
-	if (pdata) {
-		cfg->bl_mode    = pdata->bl_mode;
-		cfg->dim_mode   = pdata->dim_mode;
-		cfg->full_scale = pdata->full_scale;
-		cfg->rise_time  = pdata->rise_time;
-		cfg->fall_time  = pdata->fall_time;
-		cfg->pwm_pol    = pdata->pwm_pol;
-	}
-
 	/* Brightness ramp up/down */
-	val = (cfg->rise_time << LP8788_BL_RAMP_RISE_SHIFT) | cfg->fall_time;
+	val = (LP8788_RAMP_8192us << LP8788_BL_RAMP_RISE_SHIFT) | LP8788_RAMP_8192us;
 	ret = lp8788_write_byte(bl->lp, LP8788_BL_RAMP, val);
 	if (ret)
 		return ret;
 
 	/* Fullscale current setting */
-	val = (cfg->full_scale << LP8788_BL_FULLSCALE_SHIFT) |
-		(cfg->dim_mode << LP8788_BL_DIM_MODE_SHIFT);
+	val = (LP8788_FULLSCALE_1900uA << LP8788_BL_FULLSCALE_SHIFT) |
+		(LP8788_DIM_EXPONENTIAL << LP8788_BL_DIM_MODE_SHIFT);
 
 	/* Brightness control mode */
-	switch (cfg->bl_mode) {
-	case LP8788_BL_REGISTER_ONLY:
-		val |= LP8788_BL_EN;
-		break;
-	case LP8788_BL_COMB_PWM_BASED:
-	case LP8788_BL_COMB_REGISTER_BASED:
-		val |= LP8788_BL_EN | LP8788_BL_PWM_INPUT_EN |
-			(cfg->pwm_pol << LP8788_BL_PWM_POLARITY_SHIFT);
-		break;
-	default:
-		dev_err(bl->lp->dev, "invalid mode: %d\n", cfg->bl_mode);
-		return -EINVAL;
-	}
-
-	bl->mode = cfg->bl_mode;
+	val |= LP8788_BL_EN;
 
 	return lp8788_write_byte(bl->lp, LP8788_BL_CONFIG, val);
 }
 
-static void lp8788_pwm_ctrl(struct lp8788_bl *bl, int br, int max_br)
-{
-	unsigned int period;
-	unsigned int duty;
-	struct device *dev;
-	struct pwm_device *pwm;
-
-	if (!bl->pdata)
-		return;
-
-	period = bl->pdata->period_ns;
-	duty = br * period / max_br;
-	dev = bl->lp->dev;
-
-	/* request PWM device with the consumer name */
-	if (!bl->pwm) {
-		pwm = devm_pwm_get(dev, LP8788_DEV_BACKLIGHT);
-		if (IS_ERR(pwm)) {
-			dev_err(dev, "can not get PWM device\n");
-			return;
-		}
-
-		bl->pwm = pwm;
-
-		/*
-		 * FIXME: pwm_apply_args() should be removed when switching to
-		 * the atomic PWM API.
-		 */
-		pwm_apply_args(pwm);
-	}
-
-	pwm_config(bl->pwm, duty, period);
-	if (duty)
-		pwm_enable(bl->pwm);
-	else
-		pwm_disable(bl->pwm);
-}
-
 static int lp8788_bl_update_status(struct backlight_device *bl_dev)
 {
 	struct lp8788_bl *bl = bl_get_data(bl_dev);
-	enum lp8788_bl_ctrl_mode mode = bl->mode;
 
 	if (bl_dev->props.state & BL_CORE_SUSPENDED)
 		bl_dev->props.brightness = 0;
 
-	if (is_brightness_ctrl_by_pwm(mode)) {
-		int brt = bl_dev->props.brightness;
-		int max = bl_dev->props.max_brightness;
-
-		lp8788_pwm_ctrl(bl, brt, max);
-	} else if (is_brightness_ctrl_by_register(mode)) {
-		u8 brt = bl_dev->props.brightness;
-
-		lp8788_write_byte(bl->lp, LP8788_BL_BRIGHTNESS, brt);
-	}
+	lp8788_write_byte(bl->lp, LP8788_BL_BRIGHTNESS, bl_dev->props.brightness);
 
 	return 0;
 }
@@ -187,29 +77,15 @@  static int lp8788_backlight_register(struct lp8788_bl *bl)
 {
 	struct backlight_device *bl_dev;
 	struct backlight_properties props;
-	struct lp8788_backlight_platform_data *pdata = bl->pdata;
-	int init_brt;
-	char *name;
 
 	props.type = BACKLIGHT_PLATFORM;
 	props.max_brightness = MAX_BRIGHTNESS;
 
 	/* Initial brightness */
-	if (pdata)
-		init_brt = min_t(int, pdata->initial_brightness,
-				props.max_brightness);
-	else
-		init_brt = 0;
-
-	props.brightness = init_brt;
+	props.brightness = 0;
 
 	/* Backlight device name */
-	if (!pdata || !pdata->name)
-		name = DEFAULT_BL_NAME;
-	else
-		name = pdata->name;
-
-	bl_dev = backlight_device_register(name, bl->lp->dev, bl,
+	bl_dev = backlight_device_register(DEFAULT_BL_NAME, bl->lp->dev, bl,
 				       &lp8788_bl_ops, &props);
 	if (IS_ERR(bl_dev))
 		return PTR_ERR(bl_dev);
@@ -229,16 +105,7 @@  static void lp8788_backlight_unregister(struct lp8788_bl *bl)
 static ssize_t lp8788_get_bl_ctl_mode(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	struct lp8788_bl *bl = dev_get_drvdata(dev);
-	enum lp8788_bl_ctrl_mode mode = bl->mode;
-	char *strmode;
-
-	if (is_brightness_ctrl_by_pwm(mode))
-		strmode = "PWM based";
-	else if (is_brightness_ctrl_by_register(mode))
-		strmode = "Register based";
-	else
-		strmode = "Invalid mode";
+	const char *strmode = "Register based";
 
 	return scnprintf(buf, PAGE_SIZE, "%s\n", strmode);
 }
@@ -265,8 +132,6 @@  static int lp8788_backlight_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	bl->lp = lp;
-	if (lp->pdata)
-		bl->pdata = lp->pdata->bl_pdata;
 
 	platform_set_drvdata(pdev, bl);
 
diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h
index 3d5c480d58ea..46d8fa779134 100644
--- a/include/linux/mfd/lp8788.h
+++ b/include/linux/mfd/lp8788.h
@@ -12,7 +12,6 @@ 
 
 #include <linux/gpio.h>
 #include <linux/irqdomain.h>
-#include <linux/pwm.h>
 #include <linux/regmap.h>
 
 #define LP8788_DEV_BUCK		"lp8788-buck"
@@ -88,12 +87,6 @@  enum lp8788_charger_event {
 	CHARGER_DETECTED,
 };
 
-enum lp8788_bl_ctrl_mode {
-	LP8788_BL_REGISTER_ONLY,
-	LP8788_BL_COMB_PWM_BASED,	/* PWM + I2C, changed by PWM input */
-	LP8788_BL_COMB_REGISTER_BASED,	/* PWM + I2C, changed by I2C */
-};
-
 enum lp8788_bl_dim_mode {
 	LP8788_DIM_EXPONENTIAL,
 	LP8788_DIM_LINEAR,
@@ -206,31 +199,6 @@  struct lp8788_charger_platform_data {
 				enum lp8788_charger_event event);
 };
 
-/*
- * struct lp8788_backlight_platform_data
- * @name                  : backlight driver name. (default: "lcd-backlight")
- * @initial_brightness    : initial value of backlight brightness
- * @bl_mode               : brightness control by pwm or lp8788 register
- * @dim_mode              : dimming mode selection
- * @full_scale            : full scale current setting
- * @rise_time             : brightness ramp up step time
- * @fall_time             : brightness ramp down step time
- * @pwm_pol               : pwm polarity setting when bl_mode is pwm based
- * @period_ns             : platform specific pwm period value. unit is nano.
-			    Only valid when bl_mode is LP8788_BL_COMB_PWM_BASED
- */
-struct lp8788_backlight_platform_data {
-	char *name;
-	int initial_brightness;
-	enum lp8788_bl_ctrl_mode bl_mode;
-	enum lp8788_bl_dim_mode dim_mode;
-	enum lp8788_bl_full_scale_current full_scale;
-	enum lp8788_bl_ramp_step rise_time;
-	enum lp8788_bl_ramp_step fall_time;
-	enum pwm_polarity pwm_pol;
-	unsigned int period_ns;
-};
-
 /*
  * struct lp8788_led_platform_data
  * @name         : led driver name. (default: "keyboard-backlight")
@@ -272,7 +240,6 @@  struct lp8788_vib_platform_data {
  * @buck2_dvs    : gpio configurations for buck2 dvs
  * @chg_pdata    : platform data for charger driver
  * @alarm_sel    : rtc alarm selection (1 or 2)
- * @bl_pdata     : configurable data for backlight driver
  * @led_pdata    : configurable data for led driver
  * @vib_pdata    : configurable data for vibrator driver
  * @adc_pdata    : iio map data for adc driver
@@ -294,9 +261,6 @@  struct lp8788_platform_data {
 	/* rtc alarm */
 	enum lp8788_alarm_sel alarm_sel;
 
-	/* backlight */
-	struct lp8788_backlight_platform_data *bl_pdata;
-
 	/* current sinks */
 	struct lp8788_led_platform_data *led_pdata;
 	struct lp8788_vib_platform_data *vib_pdata;