| Message ID | 20240326-spmi-multi-master-support-v6-3-1c87d8306c5b@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | spmi: pmic-arb: Add support for multiple buses | expand |
On 26/03/2024 17:28, Abel Vesa wrote: > Rather than using conditionals in probe function, add the APID init > as a version specific operation. Due to v7, which supports multiple > buses, pass on the bus index to be used for sorting out the apid base > and count. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > drivers/spmi/spmi-pmic-arb.c | 199 +++++++++++++++++++++++++++---------------- > 1 file changed, 124 insertions(+), 75 deletions(-) > > diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c > index 9ed1180fe31f..38fed8a585fe 100644 > --- a/drivers/spmi/spmi-pmic-arb.c > +++ b/drivers/spmi/spmi-pmic-arb.c > @@ -183,6 +183,7 @@ struct spmi_pmic_arb { > * struct pmic_arb_ver_ops - version dependent functionality. > * > * @ver_str: version string. > + * @init_apid: finds the apid base and count > * @ppid_to_apid: finds the apid for a given ppid. > * @non_data_cmd: on v1 issues an spmi non-data command. > * on v2 no HW support, returns -EOPNOTSUPP. > @@ -202,6 +203,7 @@ struct spmi_pmic_arb { > */ > struct pmic_arb_ver_ops { > const char *ver_str; > + int (*init_apid)(struct spmi_pmic_arb *pmic_arb, int index); > int (*ppid_to_apid)(struct spmi_pmic_arb *pmic_arb, u16 ppid); > /* spmi commands (read_cmd, write_cmd, cmd) functionality */ > int (*offset)(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr, > @@ -942,6 +944,38 @@ static int qpnpint_irq_domain_alloc(struct irq_domain *domain, > return 0; > } > > +static int pmic_arb_init_apid_min_max(struct spmi_pmic_arb *pmic_arb) > +{ > + /* > + * Initialize max_apid/min_apid to the opposite bounds, during > + * the irq domain translation, we are sure to update these > + */ > + pmic_arb->max_apid = 0; > + pmic_arb->min_apid = pmic_arb->max_periphs - 1; > + > + return 0; > +} > + > +static int pmic_arb_init_apid_v1(struct spmi_pmic_arb *pmic_arb, int index) > +{ > + u32 *mapping_table; > + > + if (index) { > + dev_err(&pmic_arb->spmic->dev, "Unsupported buses count %d detected\n", > + index); > + return -EINVAL; > + } > + > + mapping_table = devm_kcalloc(&pmic_arb->spmic->dev, pmic_arb->max_periphs, > + sizeof(*mapping_table), GFP_KERNEL); > + if (!mapping_table) > + return -ENOMEM; > + > + pmic_arb->mapping_table = mapping_table; Can you specify in the spmi_pmic_arb->mapping_table struct documentation the mapping_table is only used in v1 ? or even better rename it to mapping_table_v1 > + > + return pmic_arb_init_apid_min_max(pmic_arb); > +} > + > static int pmic_arb_ppid_to_apid_v1(struct spmi_pmic_arb *pmic_arb, u16 ppid) > { > u32 *mapping_table = pmic_arb->mapping_table; > @@ -1144,6 +1178,40 @@ static int pmic_arb_offset_v2(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr, > return 0x1000 * pmic_arb->ee + 0x8000 * apid; > } > > +static int pmic_arb_init_apid_v5(struct spmi_pmic_arb *pmic_arb, int index) > +{ > + int ret; > + > + if (index) { > + dev_err(&pmic_arb->spmic->dev, "Unsupported buses count %d detected\n", > + index); > + return -EINVAL; > + } > + > + pmic_arb->base_apid = 0; > + pmic_arb->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) & > + PMIC_ARB_FEATURES_PERIPH_MASK; > + > + if (pmic_arb->base_apid + pmic_arb->apid_count > pmic_arb->max_periphs) { > + dev_err(&pmic_arb->spmic->dev, "Unsupported APID count %d detected\n", > + pmic_arb->base_apid + pmic_arb->apid_count); > + return -EINVAL; > + } > + > + ret = pmic_arb_init_apid_min_max(pmic_arb); > + if (ret) > + return ret; > + > + ret = pmic_arb_read_apid_map_v5(pmic_arb); > + if (ret) { > + dev_err(&pmic_arb->spmic->dev, "could not read APID->PPID mapping table, rc= %d\n", > + ret); > + return ret; > + } > + > + return 0; > +} > + > /* > * v5 offset per ee and per apid for observer channels and per apid for > * read/write channels. > @@ -1178,6 +1246,49 @@ static int pmic_arb_offset_v5(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr, > return offset; > } > > +/* > + * Only v7 supports 2 buses. Each bus will get a different apid count, read > + * from different registers. > + */ > +static int pmic_arb_init_apid_v7(struct spmi_pmic_arb *pmic_arb, int index) > +{ > + int ret; > + > + if (index == 0) { > + pmic_arb->base_apid = 0; > + pmic_arb->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) & > + PMIC_ARB_FEATURES_PERIPH_MASK; > + } else if (index == 1) { > + pmic_arb->base_apid = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) & > + PMIC_ARB_FEATURES_PERIPH_MASK; > + pmic_arb->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES1) & > + PMIC_ARB_FEATURES_PERIPH_MASK; > + } else { > + dev_err(&pmic_arb->spmic->dev, "Unsupported buses count %d detected\n", > + index); > + return -EINVAL; > + } > + > + if (pmic_arb->base_apid + pmic_arb->apid_count > pmic_arb->max_periphs) { > + dev_err(&pmic_arb->spmic->dev, "Unsupported APID count %d detected\n", > + pmic_arb->base_apid + pmic_arb->apid_count); > + return -EINVAL; > + } > + > + ret = pmic_arb_init_apid_min_max(pmic_arb); > + if (ret) > + return ret; > + > + ret = pmic_arb_read_apid_map_v5(pmic_arb); > + if (ret) { > + dev_err(&pmic_arb->spmic->dev, "could not read APID->PPID mapping table, rc= %d\n", > + ret); > + return ret; > + } > + > + return 0; > +} > + > /* > * v7 offset per ee and per apid for observer channels and per apid for > * read/write channels. > @@ -1358,6 +1469,7 @@ pmic_arb_apid_owner_v7(struct spmi_pmic_arb *pmic_arb, u16 n) > > static const struct pmic_arb_ver_ops pmic_arb_v1 = { > .ver_str = "v1", > + .init_apid = pmic_arb_init_apid_v1, > .ppid_to_apid = pmic_arb_ppid_to_apid_v1, > .non_data_cmd = pmic_arb_non_data_cmd_v1, > .offset = pmic_arb_offset_v1, > @@ -1372,6 +1484,7 @@ static const struct pmic_arb_ver_ops pmic_arb_v1 = { > > static const struct pmic_arb_ver_ops pmic_arb_v2 = { > .ver_str = "v2", > + .init_apid = pmic_arb_init_apid_v1, > .ppid_to_apid = pmic_arb_ppid_to_apid_v2, > .non_data_cmd = pmic_arb_non_data_cmd_v2, > .offset = pmic_arb_offset_v2, > @@ -1386,6 +1499,7 @@ static const struct pmic_arb_ver_ops pmic_arb_v2 = { > > static const struct pmic_arb_ver_ops pmic_arb_v3 = { > .ver_str = "v3", > + .init_apid = pmic_arb_init_apid_v1, > .ppid_to_apid = pmic_arb_ppid_to_apid_v2, > .non_data_cmd = pmic_arb_non_data_cmd_v2, > .offset = pmic_arb_offset_v2, > @@ -1400,6 +1514,7 @@ static const struct pmic_arb_ver_ops pmic_arb_v3 = { > > static const struct pmic_arb_ver_ops pmic_arb_v5 = { > .ver_str = "v5", > + .init_apid = pmic_arb_init_apid_v5, > .ppid_to_apid = pmic_arb_ppid_to_apid_v5, > .non_data_cmd = pmic_arb_non_data_cmd_v2, > .offset = pmic_arb_offset_v5, > @@ -1414,6 +1529,7 @@ static const struct pmic_arb_ver_ops pmic_arb_v5 = { > > static const struct pmic_arb_ver_ops pmic_arb_v7 = { > .ver_str = "v7", > + .init_apid = pmic_arb_init_apid_v7, > .ppid_to_apid = pmic_arb_ppid_to_apid_v5, > .non_data_cmd = pmic_arb_non_data_cmd_v2, > .offset = pmic_arb_offset_v7, > @@ -1439,7 +1555,6 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) > struct spmi_controller *ctrl; > struct resource *res; > void __iomem *core; > - u32 *mapping_table; > u32 channel, ee, hw_ver; > int err; > > @@ -1467,12 +1582,6 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) > > pmic_arb->core_size = resource_size(res); > > - pmic_arb->ppid_to_apid = devm_kcalloc(&ctrl->dev, PMIC_ARB_MAX_PPID, > - sizeof(*pmic_arb->ppid_to_apid), > - GFP_KERNEL); > - if (!pmic_arb->ppid_to_apid) > - return -ENOMEM; > - > hw_ver = readl_relaxed(core + PMIC_ARB_VERSION); > > if (hw_ver < PMIC_ARB_VERSION_V2_MIN) { > @@ -1506,58 +1615,17 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) > return PTR_ERR(pmic_arb->wr_base); > } > > - pmic_arb->max_periphs = PMIC_ARB_MAX_PERIPHS; > + dev_info(&ctrl->dev, "PMIC arbiter version %s (0x%x)\n", > + pmic_arb->ver_ops->ver_str, hw_ver); > > - if (hw_ver >= PMIC_ARB_VERSION_V7_MIN) { > + if (hw_ver < PMIC_ARB_VERSION_V7_MIN) > + pmic_arb->max_periphs = PMIC_ARB_MAX_PERIPHS; > + else > pmic_arb->max_periphs = PMIC_ARB_MAX_PERIPHS_V7; > - /* Optional property for v7: */ > - of_property_read_u32(pdev->dev.of_node, "qcom,bus-id", > - &pmic_arb->bus_instance); > - if (pmic_arb->bus_instance > 1) { > - dev_err(&pdev->dev, "invalid bus instance (%u) specified\n", > - pmic_arb->bus_instance); > - return -EINVAL; > - } > - > - if (pmic_arb->bus_instance == 0) { > - pmic_arb->base_apid = 0; > - pmic_arb->apid_count = > - readl_relaxed(core + PMIC_ARB_FEATURES) & > - PMIC_ARB_FEATURES_PERIPH_MASK; > - } else { > - pmic_arb->base_apid = > - readl_relaxed(core + PMIC_ARB_FEATURES) & > - PMIC_ARB_FEATURES_PERIPH_MASK; > - pmic_arb->apid_count = > - readl_relaxed(core + PMIC_ARB_FEATURES1) & > - PMIC_ARB_FEATURES_PERIPH_MASK; > - } > > - if (pmic_arb->base_apid + pmic_arb->apid_count > pmic_arb->max_periphs) { > - dev_err(&pdev->dev, "Unsupported APID count %d detected\n", > - pmic_arb->base_apid + pmic_arb->apid_count); > - return -EINVAL; > - } > - } else if (hw_ver >= PMIC_ARB_VERSION_V5_MIN) { > - pmic_arb->base_apid = 0; > - pmic_arb->apid_count = readl_relaxed(core + PMIC_ARB_FEATURES) & > - PMIC_ARB_FEATURES_PERIPH_MASK; > - > - if (pmic_arb->apid_count > pmic_arb->max_periphs) { > - dev_err(&pdev->dev, "Unsupported APID count %d detected\n", > - pmic_arb->apid_count); > - return -EINVAL; > - } > - } > - > - pmic_arb->apid_data = devm_kcalloc(&ctrl->dev, pmic_arb->max_periphs, > - sizeof(*pmic_arb->apid_data), > - GFP_KERNEL); > - if (!pmic_arb->apid_data) > - return -ENOMEM; > - > - dev_info(&ctrl->dev, "PMIC arbiter version %s (0x%x)\n", > - pmic_arb->ver_ops->ver_str, hw_ver); > + err = pmic_arb->ver_ops->init_apid(pmic_arb, 0); > + if (err) > + return err; > > res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intr"); > pmic_arb->intr = devm_ioremap_resource(&ctrl->dev, res); > @@ -1599,16 +1667,6 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) > } > > pmic_arb->ee = ee; > - mapping_table = devm_kcalloc(&ctrl->dev, pmic_arb->max_periphs, > - sizeof(*mapping_table), GFP_KERNEL); > - if (!mapping_table) > - return -ENOMEM; > - > - pmic_arb->mapping_table = mapping_table; > - /* Initialize max_apid/min_apid to the opposite bounds, during > - * the irq domain translation, we are sure to update these */ > - pmic_arb->max_apid = 0; > - pmic_arb->min_apid = pmic_arb->max_periphs - 1; > > platform_set_drvdata(pdev, ctrl); > raw_spin_lock_init(&pmic_arb->lock); > @@ -1617,15 +1675,6 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) > ctrl->read_cmd = pmic_arb_read_cmd; > ctrl->write_cmd = pmic_arb_write_cmd; > > - if (hw_ver >= PMIC_ARB_VERSION_V5_MIN) { > - err = pmic_arb_read_apid_map_v5(pmic_arb); > - if (err) { > - dev_err(&pdev->dev, "could not read APID->PPID mapping table, rc= %d\n", > - err); > - return err; > - } > - } > - > dev_dbg(&pdev->dev, "adding irq domain\n"); > pmic_arb->domain = irq_domain_add_tree(pdev->dev.of_node, > &pmic_arb_irq_domain_ops, pmic_arb); > With that clarified: Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
On 24-03-28 09:51:49, Neil Armstrong wrote: > On 26/03/2024 17:28, Abel Vesa wrote: > > Rather than using conditionals in probe function, add the APID init > > as a version specific operation. Due to v7, which supports multiple > > buses, pass on the bus index to be used for sorting out the apid base > > and count. > > > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > > --- > > drivers/spmi/spmi-pmic-arb.c | 199 +++++++++++++++++++++++++++---------------- > > 1 file changed, 124 insertions(+), 75 deletions(-) > > > > diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c > > index 9ed1180fe31f..38fed8a585fe 100644 > > --- a/drivers/spmi/spmi-pmic-arb.c > > +++ b/drivers/spmi/spmi-pmic-arb.c > > @@ -183,6 +183,7 @@ struct spmi_pmic_arb { > > * struct pmic_arb_ver_ops - version dependent functionality. > > * > > * @ver_str: version string. > > + * @init_apid: finds the apid base and count > > * @ppid_to_apid: finds the apid for a given ppid. > > * @non_data_cmd: on v1 issues an spmi non-data command. > > * on v2 no HW support, returns -EOPNOTSUPP. > > @@ -202,6 +203,7 @@ struct spmi_pmic_arb { > > */ > > struct pmic_arb_ver_ops { > > const char *ver_str; > > + int (*init_apid)(struct spmi_pmic_arb *pmic_arb, int index); > > int (*ppid_to_apid)(struct spmi_pmic_arb *pmic_arb, u16 ppid); > > /* spmi commands (read_cmd, write_cmd, cmd) functionality */ > > int (*offset)(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr, > > @@ -942,6 +944,38 @@ static int qpnpint_irq_domain_alloc(struct irq_domain *domain, > > return 0; > > } > > +static int pmic_arb_init_apid_min_max(struct spmi_pmic_arb *pmic_arb) > > +{ > > + /* > > + * Initialize max_apid/min_apid to the opposite bounds, during > > + * the irq domain translation, we are sure to update these > > + */ > > + pmic_arb->max_apid = 0; > > + pmic_arb->min_apid = pmic_arb->max_periphs - 1; > > + > > + return 0; > > +} > > + > > +static int pmic_arb_init_apid_v1(struct spmi_pmic_arb *pmic_arb, int index) > > +{ > > + u32 *mapping_table; > > + > > + if (index) { > > + dev_err(&pmic_arb->spmic->dev, "Unsupported buses count %d detected\n", > > + index); > > + return -EINVAL; > > + } > > + > > + mapping_table = devm_kcalloc(&pmic_arb->spmic->dev, pmic_arb->max_periphs, > > + sizeof(*mapping_table), GFP_KERNEL); > > + if (!mapping_table) > > + return -ENOMEM; > > + > > + pmic_arb->mapping_table = mapping_table; > > Can you specify in the spmi_pmic_arb->mapping_table struct documentation the mapping_table > is only used in v1 ? or even better rename it to mapping_table_v1 > Actually the mapping_table is used on version 1 through 3.
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c index 9ed1180fe31f..38fed8a585fe 100644 --- a/drivers/spmi/spmi-pmic-arb.c +++ b/drivers/spmi/spmi-pmic-arb.c @@ -183,6 +183,7 @@ struct spmi_pmic_arb { * struct pmic_arb_ver_ops - version dependent functionality. * * @ver_str: version string. + * @init_apid: finds the apid base and count * @ppid_to_apid: finds the apid for a given ppid. * @non_data_cmd: on v1 issues an spmi non-data command. * on v2 no HW support, returns -EOPNOTSUPP. @@ -202,6 +203,7 @@ struct spmi_pmic_arb { */ struct pmic_arb_ver_ops { const char *ver_str; + int (*init_apid)(struct spmi_pmic_arb *pmic_arb, int index); int (*ppid_to_apid)(struct spmi_pmic_arb *pmic_arb, u16 ppid); /* spmi commands (read_cmd, write_cmd, cmd) functionality */ int (*offset)(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr, @@ -942,6 +944,38 @@ static int qpnpint_irq_domain_alloc(struct irq_domain *domain, return 0; } +static int pmic_arb_init_apid_min_max(struct spmi_pmic_arb *pmic_arb) +{ + /* + * Initialize max_apid/min_apid to the opposite bounds, during + * the irq domain translation, we are sure to update these + */ + pmic_arb->max_apid = 0; + pmic_arb->min_apid = pmic_arb->max_periphs - 1; + + return 0; +} + +static int pmic_arb_init_apid_v1(struct spmi_pmic_arb *pmic_arb, int index) +{ + u32 *mapping_table; + + if (index) { + dev_err(&pmic_arb->spmic->dev, "Unsupported buses count %d detected\n", + index); + return -EINVAL; + } + + mapping_table = devm_kcalloc(&pmic_arb->spmic->dev, pmic_arb->max_periphs, + sizeof(*mapping_table), GFP_KERNEL); + if (!mapping_table) + return -ENOMEM; + + pmic_arb->mapping_table = mapping_table; + + return pmic_arb_init_apid_min_max(pmic_arb); +} + static int pmic_arb_ppid_to_apid_v1(struct spmi_pmic_arb *pmic_arb, u16 ppid) { u32 *mapping_table = pmic_arb->mapping_table; @@ -1144,6 +1178,40 @@ static int pmic_arb_offset_v2(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr, return 0x1000 * pmic_arb->ee + 0x8000 * apid; } +static int pmic_arb_init_apid_v5(struct spmi_pmic_arb *pmic_arb, int index) +{ + int ret; + + if (index) { + dev_err(&pmic_arb->spmic->dev, "Unsupported buses count %d detected\n", + index); + return -EINVAL; + } + + pmic_arb->base_apid = 0; + pmic_arb->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) & + PMIC_ARB_FEATURES_PERIPH_MASK; + + if (pmic_arb->base_apid + pmic_arb->apid_count > pmic_arb->max_periphs) { + dev_err(&pmic_arb->spmic->dev, "Unsupported APID count %d detected\n", + pmic_arb->base_apid + pmic_arb->apid_count); + return -EINVAL; + } + + ret = pmic_arb_init_apid_min_max(pmic_arb); + if (ret) + return ret; + + ret = pmic_arb_read_apid_map_v5(pmic_arb); + if (ret) { + dev_err(&pmic_arb->spmic->dev, "could not read APID->PPID mapping table, rc= %d\n", + ret); + return ret; + } + + return 0; +} + /* * v5 offset per ee and per apid for observer channels and per apid for * read/write channels. @@ -1178,6 +1246,49 @@ static int pmic_arb_offset_v5(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr, return offset; } +/* + * Only v7 supports 2 buses. Each bus will get a different apid count, read + * from different registers. + */ +static int pmic_arb_init_apid_v7(struct spmi_pmic_arb *pmic_arb, int index) +{ + int ret; + + if (index == 0) { + pmic_arb->base_apid = 0; + pmic_arb->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) & + PMIC_ARB_FEATURES_PERIPH_MASK; + } else if (index == 1) { + pmic_arb->base_apid = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) & + PMIC_ARB_FEATURES_PERIPH_MASK; + pmic_arb->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES1) & + PMIC_ARB_FEATURES_PERIPH_MASK; + } else { + dev_err(&pmic_arb->spmic->dev, "Unsupported buses count %d detected\n", + index); + return -EINVAL; + } + + if (pmic_arb->base_apid + pmic_arb->apid_count > pmic_arb->max_periphs) { + dev_err(&pmic_arb->spmic->dev, "Unsupported APID count %d detected\n", + pmic_arb->base_apid + pmic_arb->apid_count); + return -EINVAL; + } + + ret = pmic_arb_init_apid_min_max(pmic_arb); + if (ret) + return ret; + + ret = pmic_arb_read_apid_map_v5(pmic_arb); + if (ret) { + dev_err(&pmic_arb->spmic->dev, "could not read APID->PPID mapping table, rc= %d\n", + ret); + return ret; + } + + return 0; +} + /* * v7 offset per ee and per apid for observer channels and per apid for * read/write channels. @@ -1358,6 +1469,7 @@ pmic_arb_apid_owner_v7(struct spmi_pmic_arb *pmic_arb, u16 n) static const struct pmic_arb_ver_ops pmic_arb_v1 = { .ver_str = "v1", + .init_apid = pmic_arb_init_apid_v1, .ppid_to_apid = pmic_arb_ppid_to_apid_v1, .non_data_cmd = pmic_arb_non_data_cmd_v1, .offset = pmic_arb_offset_v1, @@ -1372,6 +1484,7 @@ static const struct pmic_arb_ver_ops pmic_arb_v1 = { static const struct pmic_arb_ver_ops pmic_arb_v2 = { .ver_str = "v2", + .init_apid = pmic_arb_init_apid_v1, .ppid_to_apid = pmic_arb_ppid_to_apid_v2, .non_data_cmd = pmic_arb_non_data_cmd_v2, .offset = pmic_arb_offset_v2, @@ -1386,6 +1499,7 @@ static const struct pmic_arb_ver_ops pmic_arb_v2 = { static const struct pmic_arb_ver_ops pmic_arb_v3 = { .ver_str = "v3", + .init_apid = pmic_arb_init_apid_v1, .ppid_to_apid = pmic_arb_ppid_to_apid_v2, .non_data_cmd = pmic_arb_non_data_cmd_v2, .offset = pmic_arb_offset_v2, @@ -1400,6 +1514,7 @@ static const struct pmic_arb_ver_ops pmic_arb_v3 = { static const struct pmic_arb_ver_ops pmic_arb_v5 = { .ver_str = "v5", + .init_apid = pmic_arb_init_apid_v5, .ppid_to_apid = pmic_arb_ppid_to_apid_v5, .non_data_cmd = pmic_arb_non_data_cmd_v2, .offset = pmic_arb_offset_v5, @@ -1414,6 +1529,7 @@ static const struct pmic_arb_ver_ops pmic_arb_v5 = { static const struct pmic_arb_ver_ops pmic_arb_v7 = { .ver_str = "v7", + .init_apid = pmic_arb_init_apid_v7, .ppid_to_apid = pmic_arb_ppid_to_apid_v5, .non_data_cmd = pmic_arb_non_data_cmd_v2, .offset = pmic_arb_offset_v7, @@ -1439,7 +1555,6 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) struct spmi_controller *ctrl; struct resource *res; void __iomem *core; - u32 *mapping_table; u32 channel, ee, hw_ver; int err; @@ -1467,12 +1582,6 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) pmic_arb->core_size = resource_size(res); - pmic_arb->ppid_to_apid = devm_kcalloc(&ctrl->dev, PMIC_ARB_MAX_PPID, - sizeof(*pmic_arb->ppid_to_apid), - GFP_KERNEL); - if (!pmic_arb->ppid_to_apid) - return -ENOMEM; - hw_ver = readl_relaxed(core + PMIC_ARB_VERSION); if (hw_ver < PMIC_ARB_VERSION_V2_MIN) { @@ -1506,58 +1615,17 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) return PTR_ERR(pmic_arb->wr_base); } - pmic_arb->max_periphs = PMIC_ARB_MAX_PERIPHS; + dev_info(&ctrl->dev, "PMIC arbiter version %s (0x%x)\n", + pmic_arb->ver_ops->ver_str, hw_ver); - if (hw_ver >= PMIC_ARB_VERSION_V7_MIN) { + if (hw_ver < PMIC_ARB_VERSION_V7_MIN) + pmic_arb->max_periphs = PMIC_ARB_MAX_PERIPHS; + else pmic_arb->max_periphs = PMIC_ARB_MAX_PERIPHS_V7; - /* Optional property for v7: */ - of_property_read_u32(pdev->dev.of_node, "qcom,bus-id", - &pmic_arb->bus_instance); - if (pmic_arb->bus_instance > 1) { - dev_err(&pdev->dev, "invalid bus instance (%u) specified\n", - pmic_arb->bus_instance); - return -EINVAL; - } - - if (pmic_arb->bus_instance == 0) { - pmic_arb->base_apid = 0; - pmic_arb->apid_count = - readl_relaxed(core + PMIC_ARB_FEATURES) & - PMIC_ARB_FEATURES_PERIPH_MASK; - } else { - pmic_arb->base_apid = - readl_relaxed(core + PMIC_ARB_FEATURES) & - PMIC_ARB_FEATURES_PERIPH_MASK; - pmic_arb->apid_count = - readl_relaxed(core + PMIC_ARB_FEATURES1) & - PMIC_ARB_FEATURES_PERIPH_MASK; - } - if (pmic_arb->base_apid + pmic_arb->apid_count > pmic_arb->max_periphs) { - dev_err(&pdev->dev, "Unsupported APID count %d detected\n", - pmic_arb->base_apid + pmic_arb->apid_count); - return -EINVAL; - } - } else if (hw_ver >= PMIC_ARB_VERSION_V5_MIN) { - pmic_arb->base_apid = 0; - pmic_arb->apid_count = readl_relaxed(core + PMIC_ARB_FEATURES) & - PMIC_ARB_FEATURES_PERIPH_MASK; - - if (pmic_arb->apid_count > pmic_arb->max_periphs) { - dev_err(&pdev->dev, "Unsupported APID count %d detected\n", - pmic_arb->apid_count); - return -EINVAL; - } - } - - pmic_arb->apid_data = devm_kcalloc(&ctrl->dev, pmic_arb->max_periphs, - sizeof(*pmic_arb->apid_data), - GFP_KERNEL); - if (!pmic_arb->apid_data) - return -ENOMEM; - - dev_info(&ctrl->dev, "PMIC arbiter version %s (0x%x)\n", - pmic_arb->ver_ops->ver_str, hw_ver); + err = pmic_arb->ver_ops->init_apid(pmic_arb, 0); + if (err) + return err; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intr"); pmic_arb->intr = devm_ioremap_resource(&ctrl->dev, res); @@ -1599,16 +1667,6 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) } pmic_arb->ee = ee; - mapping_table = devm_kcalloc(&ctrl->dev, pmic_arb->max_periphs, - sizeof(*mapping_table), GFP_KERNEL); - if (!mapping_table) - return -ENOMEM; - - pmic_arb->mapping_table = mapping_table; - /* Initialize max_apid/min_apid to the opposite bounds, during - * the irq domain translation, we are sure to update these */ - pmic_arb->max_apid = 0; - pmic_arb->min_apid = pmic_arb->max_periphs - 1; platform_set_drvdata(pdev, ctrl); raw_spin_lock_init(&pmic_arb->lock); @@ -1617,15 +1675,6 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) ctrl->read_cmd = pmic_arb_read_cmd; ctrl->write_cmd = pmic_arb_write_cmd; - if (hw_ver >= PMIC_ARB_VERSION_V5_MIN) { - err = pmic_arb_read_apid_map_v5(pmic_arb); - if (err) { - dev_err(&pdev->dev, "could not read APID->PPID mapping table, rc= %d\n", - err); - return err; - } - } - dev_dbg(&pdev->dev, "adding irq domain\n"); pmic_arb->domain = irq_domain_add_tree(pdev->dev.of_node, &pmic_arb_irq_domain_ops, pmic_arb);
Rather than using conditionals in probe function, add the APID init as a version specific operation. Due to v7, which supports multiple buses, pass on the bus index to be used for sorting out the apid base and count. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- drivers/spmi/spmi-pmic-arb.c | 199 +++++++++++++++++++++++++++---------------- 1 file changed, 124 insertions(+), 75 deletions(-)