Message ID | 20240325-amlogic-v6-4-upstream-dsi-ccf-vim3-v11-2-04f55de44604@linaro.org (mailing list archive) |
---|---|
State | Changes Requested, archived |
Headers | show |
Series | drm/meson: add support for MIPI DSI Display | expand |
On Mon 25 Mar 2024 at 12:09, Neil Armstrong <neil.armstrong@linaro.org> wrote: > The VCLK and VCLK_DIV clocks have supplementary bits. > > The VCLK gate has a "SOFT RESET" bit to toggle after the whole > VCLK sub-tree rate has been set, this is implemented in > the gate enable callback. > > The VCLK_DIV clocks as enable and reset bits used to disable > and reset the divider, associated with CLK_SET_RATE_GATE it ensures > the rate is set while the divider is disabled and in reset mode. > > The VCLK_DIV enable bit isn't implemented as a gate since it's part > of the divider logic and vendor does this exact sequence to ensure > the divider is correctly set. checkpatch reports a few easy CHECKs and one WARNING. Could you please fix these ? Other than that, It looks OK. > > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> > --- > drivers/clk/meson/Kconfig | 4 ++ > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/vclk.c | 141 +++++++++++++++++++++++++++++++++++++++++++++ > drivers/clk/meson/vclk.h | 51 ++++++++++++++++ > 4 files changed, 197 insertions(+) > > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig > index 29ffd14d267b..8a9823789fa3 100644 > --- a/drivers/clk/meson/Kconfig > +++ b/drivers/clk/meson/Kconfig > @@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV > tristate > select COMMON_CLK_MESON_REGMAP > > +config COMMON_CLK_MESON_VCLK > + tristate > + select COMMON_CLK_MESON_REGMAP > + > config COMMON_CLK_MESON_CLKC_UTILS > tristate > > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile > index 9ee4b954c896..9ba43fe7a07a 100644 > --- a/drivers/clk/meson/Makefile > +++ b/drivers/clk/meson/Makefile > @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o > obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o > obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o > obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o > +obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o > > # Amlogic Clock controllers > > diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c > new file mode 100644 > index 000000000000..3ea813a0a995 > --- /dev/null > +++ b/drivers/clk/meson/vclk.c > @@ -0,0 +1,141 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org> > + */ > + > +#include <linux/module.h> > +#include "vclk.h" > + > +/* The VCLK gate has a supplementary reset bit to pulse after ungating */ > + > +static inline struct meson_vclk_gate_data * > +clk_get_meson_vclk_gate_data(struct clk_regmap *clk) > +{ > + return (struct meson_vclk_gate_data *)clk->data; > +} > + > +static int meson_vclk_gate_enable(struct clk_hw *hw) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk); > + > + meson_parm_write(clk->map, &vclk->enable, 1); > + > + /* Do a reset pulse */ > + meson_parm_write(clk->map, &vclk->reset, 1); > + meson_parm_write(clk->map, &vclk->reset, 0); > + > + return 0; > +} > + > +static void meson_vclk_gate_disable(struct clk_hw *hw) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk); > + > + meson_parm_write(clk->map, &vclk->enable, 0); > +} > + > +static int meson_vclk_gate_is_enabled(struct clk_hw *hw) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk); > + > + return meson_parm_read(clk->map, &vclk->enable); > +} > + > +const struct clk_ops meson_vclk_gate_ops = { > + .enable = meson_vclk_gate_enable, > + .disable = meson_vclk_gate_disable, > + .is_enabled = meson_vclk_gate_is_enabled, > +}; > +EXPORT_SYMBOL_GPL(meson_vclk_gate_ops); > + > +/* The VCLK Divider has supplementary reset & enable bits */ > + > +static inline struct meson_vclk_div_data * > +clk_get_meson_vclk_div_data(struct clk_regmap *clk) > +{ > + return (struct meson_vclk_div_data *)clk->data; > +} > + > +static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw, > + unsigned long prate) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); > + > + return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div), > + vclk->table, vclk->flags, vclk->div.width); > +} > + > +static int meson_vclk_div_determine_rate(struct clk_hw *hw, > + struct clk_rate_request *req) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); > + > + return divider_determine_rate(hw, req, vclk->table, vclk->div.width, > + vclk->flags); > +} > + > +static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); > + int ret; > + > + ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width, > + vclk->flags); > + if (ret < 0) > + return ret; > + > + meson_parm_write(clk->map, &vclk->div, ret); > + > + return 0; > +}; > + > +static int meson_vclk_div_enable(struct clk_hw *hw) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); > + > + /* Unreset the divider when ungating */ > + meson_parm_write(clk->map, &vclk->reset, 0); > + meson_parm_write(clk->map, &vclk->enable, 1); > + > + return 0; > +} > + > +static void meson_vclk_div_disable(struct clk_hw *hw) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); > + > + /* Reset the divider when gating */ > + meson_parm_write(clk->map, &vclk->enable, 0); > + meson_parm_write(clk->map, &vclk->reset, 1); > +} > + > +static int meson_vclk_div_is_enabled(struct clk_hw *hw) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); > + > + return meson_parm_read(clk->map, &vclk->enable); > +} > + > +const struct clk_ops meson_vclk_div_ops = { > + .recalc_rate = meson_vclk_div_recalc_rate, > + .determine_rate = meson_vclk_div_determine_rate, > + .set_rate = meson_vclk_div_set_rate, > + .enable = meson_vclk_div_enable, > + .disable = meson_vclk_div_disable, > + .is_enabled = meson_vclk_div_is_enabled, > +}; > +EXPORT_SYMBOL_GPL(meson_vclk_div_ops); > + > +MODULE_DESCRIPTION("Amlogic vclk clock driver"); > +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h > new file mode 100644 > index 000000000000..20b0b181db09 > --- /dev/null > +++ b/drivers/clk/meson/vclk.h > @@ -0,0 +1,51 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org> > + */ > + > +#ifndef __VCLK_H > +#define __VCLK_H > + > +#include "clk-regmap.h" > +#include "parm.h" > + > +/** > + * struct meson_vclk_gate_data - vclk_gate regmap backed specific data > + * > + * @enable: vclk enable field > + * @reset: vclk reset field > + * @flags: hardware-specific flags > + * > + * Flags: > + * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored > + */ > +struct meson_vclk_gate_data { > + struct parm enable; > + struct parm reset; > + u8 flags; > +}; > + > +extern const struct clk_ops meson_vclk_gate_ops; > + > +/** > + * struct meson_vclk_div_data - vclk_div regmap back specific data > + * > + * @div: divider field > + * @enable: vclk divider enable field > + * @reset: vclk divider reset field > + * @table: array of value/divider pairs, last entry should have div = 0 > + * > + * Flags: > + * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored > + */ > +struct meson_vclk_div_data { > + struct parm div; > + struct parm enable; > + struct parm reset; > + const struct clk_div_table *table; > + u8 flags; > +}; > + > +extern const struct clk_ops meson_vclk_div_ops; > + > +#endif /* __VCLK_H */
On 29/03/2024 13:33, Jerome Brunet wrote: > > On Mon 25 Mar 2024 at 12:09, Neil Armstrong <neil.armstrong@linaro.org> wrote: > >> The VCLK and VCLK_DIV clocks have supplementary bits. >> >> The VCLK gate has a "SOFT RESET" bit to toggle after the whole >> VCLK sub-tree rate has been set, this is implemented in >> the gate enable callback. >> >> The VCLK_DIV clocks as enable and reset bits used to disable >> and reset the divider, associated with CLK_SET_RATE_GATE it ensures >> the rate is set while the divider is disabled and in reset mode. >> >> The VCLK_DIV enable bit isn't implemented as a gate since it's part >> of the divider logic and vendor does this exact sequence to ensure >> the divider is correctly set. > > checkpatch reports a few easy CHECKs and one WARNING. > Could you please fix these ? > > Other than that, It looks OK. Ack thx Neil > >> >> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> >> --- >> drivers/clk/meson/Kconfig | 4 ++ >> drivers/clk/meson/Makefile | 1 + >> drivers/clk/meson/vclk.c | 141 +++++++++++++++++++++++++++++++++++++++++++++ >> drivers/clk/meson/vclk.h | 51 ++++++++++++++++ >> 4 files changed, 197 insertions(+) >> >> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig >> index 29ffd14d267b..8a9823789fa3 100644 >> --- a/drivers/clk/meson/Kconfig >> +++ b/drivers/clk/meson/Kconfig >> @@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV >> tristate >> select COMMON_CLK_MESON_REGMAP >> >> +config COMMON_CLK_MESON_VCLK >> + tristate >> + select COMMON_CLK_MESON_REGMAP >> + >> config COMMON_CLK_MESON_CLKC_UTILS >> tristate >> >> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile >> index 9ee4b954c896..9ba43fe7a07a 100644 >> --- a/drivers/clk/meson/Makefile >> +++ b/drivers/clk/meson/Makefile >> @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o >> obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o >> obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o >> obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o >> +obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o >> >> # Amlogic Clock controllers >> >> diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c >> new file mode 100644 >> index 000000000000..3ea813a0a995 >> --- /dev/null >> +++ b/drivers/clk/meson/vclk.c >> @@ -0,0 +1,141 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org> >> + */ >> + >> +#include <linux/module.h> >> +#include "vclk.h" >> + >> +/* The VCLK gate has a supplementary reset bit to pulse after ungating */ >> + >> +static inline struct meson_vclk_gate_data * >> +clk_get_meson_vclk_gate_data(struct clk_regmap *clk) >> +{ >> + return (struct meson_vclk_gate_data *)clk->data; >> +} >> + >> +static int meson_vclk_gate_enable(struct clk_hw *hw) >> +{ >> + struct clk_regmap *clk = to_clk_regmap(hw); >> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk); >> + >> + meson_parm_write(clk->map, &vclk->enable, 1); >> + >> + /* Do a reset pulse */ >> + meson_parm_write(clk->map, &vclk->reset, 1); >> + meson_parm_write(clk->map, &vclk->reset, 0); >> + >> + return 0; >> +} >> + >> +static void meson_vclk_gate_disable(struct clk_hw *hw) >> +{ >> + struct clk_regmap *clk = to_clk_regmap(hw); >> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk); >> + >> + meson_parm_write(clk->map, &vclk->enable, 0); >> +} >> + >> +static int meson_vclk_gate_is_enabled(struct clk_hw *hw) >> +{ >> + struct clk_regmap *clk = to_clk_regmap(hw); >> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk); >> + >> + return meson_parm_read(clk->map, &vclk->enable); >> +} >> + >> +const struct clk_ops meson_vclk_gate_ops = { >> + .enable = meson_vclk_gate_enable, >> + .disable = meson_vclk_gate_disable, >> + .is_enabled = meson_vclk_gate_is_enabled, >> +}; >> +EXPORT_SYMBOL_GPL(meson_vclk_gate_ops); >> + >> +/* The VCLK Divider has supplementary reset & enable bits */ >> + >> +static inline struct meson_vclk_div_data * >> +clk_get_meson_vclk_div_data(struct clk_regmap *clk) >> +{ >> + return (struct meson_vclk_div_data *)clk->data; >> +} >> + >> +static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw, >> + unsigned long prate) >> +{ >> + struct clk_regmap *clk = to_clk_regmap(hw); >> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); >> + >> + return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div), >> + vclk->table, vclk->flags, vclk->div.width); >> +} >> + >> +static int meson_vclk_div_determine_rate(struct clk_hw *hw, >> + struct clk_rate_request *req) >> +{ >> + struct clk_regmap *clk = to_clk_regmap(hw); >> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); >> + >> + return divider_determine_rate(hw, req, vclk->table, vclk->div.width, >> + vclk->flags); >> +} >> + >> +static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate, >> + unsigned long parent_rate) >> +{ >> + struct clk_regmap *clk = to_clk_regmap(hw); >> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); >> + int ret; >> + >> + ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width, >> + vclk->flags); >> + if (ret < 0) >> + return ret; >> + >> + meson_parm_write(clk->map, &vclk->div, ret); >> + >> + return 0; >> +}; >> + >> +static int meson_vclk_div_enable(struct clk_hw *hw) >> +{ >> + struct clk_regmap *clk = to_clk_regmap(hw); >> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); >> + >> + /* Unreset the divider when ungating */ >> + meson_parm_write(clk->map, &vclk->reset, 0); >> + meson_parm_write(clk->map, &vclk->enable, 1); >> + >> + return 0; >> +} >> + >> +static void meson_vclk_div_disable(struct clk_hw *hw) >> +{ >> + struct clk_regmap *clk = to_clk_regmap(hw); >> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); >> + >> + /* Reset the divider when gating */ >> + meson_parm_write(clk->map, &vclk->enable, 0); >> + meson_parm_write(clk->map, &vclk->reset, 1); >> +} >> + >> +static int meson_vclk_div_is_enabled(struct clk_hw *hw) >> +{ >> + struct clk_regmap *clk = to_clk_regmap(hw); >> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); >> + >> + return meson_parm_read(clk->map, &vclk->enable); >> +} >> + >> +const struct clk_ops meson_vclk_div_ops = { >> + .recalc_rate = meson_vclk_div_recalc_rate, >> + .determine_rate = meson_vclk_div_determine_rate, >> + .set_rate = meson_vclk_div_set_rate, >> + .enable = meson_vclk_div_enable, >> + .disable = meson_vclk_div_disable, >> + .is_enabled = meson_vclk_div_is_enabled, >> +}; >> +EXPORT_SYMBOL_GPL(meson_vclk_div_ops); >> + >> +MODULE_DESCRIPTION("Amlogic vclk clock driver"); >> +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>"); >> +MODULE_LICENSE("GPL v2"); >> diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h >> new file mode 100644 >> index 000000000000..20b0b181db09 >> --- /dev/null >> +++ b/drivers/clk/meson/vclk.h >> @@ -0,0 +1,51 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org> >> + */ >> + >> +#ifndef __VCLK_H >> +#define __VCLK_H >> + >> +#include "clk-regmap.h" >> +#include "parm.h" >> + >> +/** >> + * struct meson_vclk_gate_data - vclk_gate regmap backed specific data >> + * >> + * @enable: vclk enable field >> + * @reset: vclk reset field >> + * @flags: hardware-specific flags >> + * >> + * Flags: >> + * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored >> + */ >> +struct meson_vclk_gate_data { >> + struct parm enable; >> + struct parm reset; >> + u8 flags; >> +}; >> + >> +extern const struct clk_ops meson_vclk_gate_ops; >> + >> +/** >> + * struct meson_vclk_div_data - vclk_div regmap back specific data >> + * >> + * @div: divider field >> + * @enable: vclk divider enable field >> + * @reset: vclk divider reset field >> + * @table: array of value/divider pairs, last entry should have div = 0 >> + * >> + * Flags: >> + * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored >> + */ >> +struct meson_vclk_div_data { >> + struct parm div; >> + struct parm enable; >> + struct parm reset; >> + const struct clk_div_table *table; >> + u8 flags; >> +}; >> + >> +extern const struct clk_ops meson_vclk_div_ops; >> + >> +#endif /* __VCLK_H */ > >
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index 29ffd14d267b..8a9823789fa3 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV tristate select COMMON_CLK_MESON_REGMAP +config COMMON_CLK_MESON_VCLK + tristate + select COMMON_CLK_MESON_REGMAP + config COMMON_CLK_MESON_CLKC_UTILS tristate diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 9ee4b954c896..9ba43fe7a07a 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o +obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o # Amlogic Clock controllers diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c new file mode 100644 index 000000000000..3ea813a0a995 --- /dev/null +++ b/drivers/clk/meson/vclk.c @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org> + */ + +#include <linux/module.h> +#include "vclk.h" + +/* The VCLK gate has a supplementary reset bit to pulse after ungating */ + +static inline struct meson_vclk_gate_data * +clk_get_meson_vclk_gate_data(struct clk_regmap *clk) +{ + return (struct meson_vclk_gate_data *)clk->data; +} + +static int meson_vclk_gate_enable(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk); + + meson_parm_write(clk->map, &vclk->enable, 1); + + /* Do a reset pulse */ + meson_parm_write(clk->map, &vclk->reset, 1); + meson_parm_write(clk->map, &vclk->reset, 0); + + return 0; +} + +static void meson_vclk_gate_disable(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk); + + meson_parm_write(clk->map, &vclk->enable, 0); +} + +static int meson_vclk_gate_is_enabled(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk); + + return meson_parm_read(clk->map, &vclk->enable); +} + +const struct clk_ops meson_vclk_gate_ops = { + .enable = meson_vclk_gate_enable, + .disable = meson_vclk_gate_disable, + .is_enabled = meson_vclk_gate_is_enabled, +}; +EXPORT_SYMBOL_GPL(meson_vclk_gate_ops); + +/* The VCLK Divider has supplementary reset & enable bits */ + +static inline struct meson_vclk_div_data * +clk_get_meson_vclk_div_data(struct clk_regmap *clk) +{ + return (struct meson_vclk_div_data *)clk->data; +} + +static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw, + unsigned long prate) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); + + return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div), + vclk->table, vclk->flags, vclk->div.width); +} + +static int meson_vclk_div_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); + + return divider_determine_rate(hw, req, vclk->table, vclk->div.width, + vclk->flags); +} + +static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); + int ret; + + ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width, + vclk->flags); + if (ret < 0) + return ret; + + meson_parm_write(clk->map, &vclk->div, ret); + + return 0; +}; + +static int meson_vclk_div_enable(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); + + /* Unreset the divider when ungating */ + meson_parm_write(clk->map, &vclk->reset, 0); + meson_parm_write(clk->map, &vclk->enable, 1); + + return 0; +} + +static void meson_vclk_div_disable(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); + + /* Reset the divider when gating */ + meson_parm_write(clk->map, &vclk->enable, 0); + meson_parm_write(clk->map, &vclk->reset, 1); +} + +static int meson_vclk_div_is_enabled(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk); + + return meson_parm_read(clk->map, &vclk->enable); +} + +const struct clk_ops meson_vclk_div_ops = { + .recalc_rate = meson_vclk_div_recalc_rate, + .determine_rate = meson_vclk_div_determine_rate, + .set_rate = meson_vclk_div_set_rate, + .enable = meson_vclk_div_enable, + .disable = meson_vclk_div_disable, + .is_enabled = meson_vclk_div_is_enabled, +}; +EXPORT_SYMBOL_GPL(meson_vclk_div_ops); + +MODULE_DESCRIPTION("Amlogic vclk clock driver"); +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h new file mode 100644 index 000000000000..20b0b181db09 --- /dev/null +++ b/drivers/clk/meson/vclk.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org> + */ + +#ifndef __VCLK_H +#define __VCLK_H + +#include "clk-regmap.h" +#include "parm.h" + +/** + * struct meson_vclk_gate_data - vclk_gate regmap backed specific data + * + * @enable: vclk enable field + * @reset: vclk reset field + * @flags: hardware-specific flags + * + * Flags: + * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored + */ +struct meson_vclk_gate_data { + struct parm enable; + struct parm reset; + u8 flags; +}; + +extern const struct clk_ops meson_vclk_gate_ops; + +/** + * struct meson_vclk_div_data - vclk_div regmap back specific data + * + * @div: divider field + * @enable: vclk divider enable field + * @reset: vclk divider reset field + * @table: array of value/divider pairs, last entry should have div = 0 + * + * Flags: + * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored + */ +struct meson_vclk_div_data { + struct parm div; + struct parm enable; + struct parm reset; + const struct clk_div_table *table; + u8 flags; +}; + +extern const struct clk_ops meson_vclk_div_ops; + +#endif /* __VCLK_H */
The VCLK and VCLK_DIV clocks have supplementary bits. The VCLK gate has a "SOFT RESET" bit to toggle after the whole VCLK sub-tree rate has been set, this is implemented in the gate enable callback. The VCLK_DIV clocks as enable and reset bits used to disable and reset the divider, associated with CLK_SET_RATE_GATE it ensures the rate is set while the divider is disabled and in reset mode. The VCLK_DIV enable bit isn't implemented as a gate since it's part of the divider logic and vendor does this exact sequence to ensure the divider is correctly set. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- drivers/clk/meson/Kconfig | 4 ++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/vclk.c | 141 +++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/meson/vclk.h | 51 ++++++++++++++++ 4 files changed, 197 insertions(+)