@@ -385,12 +385,16 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
int timeout = 100;
const u32 *masks;
const u16 *regs;
+ int ret;
masks = dev->info->masks;
regs = dev->info->regs;
do {
- ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+ ret = ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+ if (ret)
+ return ret;
+
timeout--;
} while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout);
@@ -399,7 +403,9 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
return -ETIMEDOUT;
/* Entry is ready for accessing. */
} else {
- ksz_read8(dev, regs[REG_IND_DATA_8], data);
+ ret = ksz_read8(dev, regs[REG_IND_DATA_8], data);
+ if (ret)
+ return ret;
/* There is no valid entry in the table. */
if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY])
@@ -428,7 +434,9 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
mutex_lock(&dev->alu_mutex);
- ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+ ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+ if (ret)
+ goto unlock_alu;
ret = ksz8_valid_dyn_entry(dev, &data);
if (ret == -ENXIO) {
@@ -439,7 +447,10 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
if (ret)
goto unlock_alu;
- ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+ ret = ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+ if (ret)
+ goto unlock_alu;
+
data_hi = (u32)(buf >> 32);
data_lo = (u32)buf;
@@ -462,7 +473,6 @@ static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
mac_addr[1] = (u8)data_hi;
mac_addr[0] = (u8)(data_hi >> 8);
- ret = 0;
unlock_alu:
mutex_unlock(&dev->alu_mutex);
The read/write path may fail. So, return error if we got it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/net/dsa/microchip/ksz8795.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)