| Message ID | 20240405-imx95-bbm-misc-v2-v2-2-9fc9186856c2@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | firmware: support i.MX95 SCMI BBM/MISC Extenstion | expand |
On 05/04/2024 14:39, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > Add i.MX SCMI Extension protocols bindings for: > - Battery Backed Secure Module(BBSM) Which is what? > - MISC settings such as General Purpose Registers settings. > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > .../devicetree/bindings/firmware/imx,scmi.yaml | 80 ++++++++++++++++++++++ > 1 file changed, 80 insertions(+) > > diff --git a/Documentation/devicetree/bindings/firmware/imx,scmi.yaml b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > new file mode 100644 > index 000000000000..7ee19a661d83 > --- /dev/null > +++ b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > @@ -0,0 +1,80 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2024 NXP > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/firmware/imx,scmi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: i.MX System Control and Management Interface(SCMI) Vendor Protocols Extension > + > +maintainers: > + - Peng Fan <peng.fan@nxp.com> > + > +allOf: > + - $ref: arm,scmi.yaml# Sorry, but arm,scmi is a final schema. Is your plan to define some common part? > + > +properties: > + protocol@81: > + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > + unevaluatedProperties: false > + description: > + The BBM Protocol is for managing Battery Backed Secure Module (BBSM) RTC > + and the ON/OFF Key > + > + properties: > + reg: > + const: 0x81 > + > + required: > + - reg > + > + protocol@84: > + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > + unevaluatedProperties: false > + description: > + The MISC Protocol is for managing SoC Misc settings, such as GPR settings Genera register is not a setting... this is a pleonasm. Please be more specific what is the GPR, MISC protocol etc. > + > + properties: > + reg: > + const: 0x84 > + > + wakeup-sources: > + description: > + Each entry consists of 2 integers, represents the source and electric signal edge Can you answer questions from reviewers? > + items: > + items: > + - description: the wakeup source > + - description: the wakeup electric signal edge > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + > + required: > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + firmware { > + scmi { > + compatible = "arm,scmi"; > + mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>; > + shmem = <&scmi_buf0>, <&scmi_buf1>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + protocol@81 { > + reg = <0x81>; > + }; > + > + protocol@84 { > + reg = <0x84>; > + wakeup-sources = <0x8000 1 > + 0x8001 1 > + 0x8002 1 > + 0x8003 1 > + 0x8004 1>; Nothing improved... If you are going to ignore reviews, then you will only get NAKed. Best regards, Krzysztof
> Subject: Re: [PATCH v2 2/6] dt-bindings: firmware: add i.MX SCMI Extension > protocol > > On 05/04/2024 14:39, Peng Fan (OSS) wrote: > > From: Peng Fan <peng.fan@nxp.com> > > > > Add i.MX SCMI Extension protocols bindings for: > > - Battery Backed Secure Module(BBSM) > > Which is what? I should say BBM(BBSM + BBNSM), BBM has RTC and ON/OFF key features, but BBM is managed by SCMI firmware and exported to agent by BBM protocol. So add bindings for i.MX BBM protocol. Is this ok? > > > - MISC settings such as General Purpose Registers settings. > > > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > --- > > .../devicetree/bindings/firmware/imx,scmi.yaml | 80 > ++++++++++++++++++++++ > > 1 file changed, 80 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > > b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > > new file mode 100644 > > index 000000000000..7ee19a661d83 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > > @@ -0,0 +1,80 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2024 > > +NXP %YAML 1.2 > > +--- > > +$id: > > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi > > > +cetree.org%2Fschemas%2Ffirmware%2Fimx%2Cscmi.yaml%23&data=05%7 > C02%7Cp > > > +eng.fan%40nxp.com%7C5d16781d3eca425a342508dc562910b7%7C686ea > 1d3bc2b4c > > > +6fa92cd99c5c301635%7C0%7C0%7C638479981570959816%7CUnknown% > 7CTWFpbGZsb > > > +3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn > 0%3D > > > +%7C0%7C%7C%7C&sdata=mWNwPvu2eyF18MroVOBHb%2Fjeo%2BIHfV5V > h%2F9ebdx65MM > > +%3D&reserved=0 > > +$schema: > > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi > > +cetree.org%2Fmeta- > schemas%2Fcore.yaml%23&data=05%7C02%7Cpeng.fan%40nx > > > +p.com%7C5d16781d3eca425a342508dc562910b7%7C686ea1d3bc2b4c6fa > 92cd99c5c > > > +301635%7C0%7C0%7C638479981570971949%7CUnknown%7CTWFpbGZs > b3d8eyJWIjoiM > > > +C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7 > C%7C%7 > > > +C&sdata=v4XnGG00D4I8j5MJvDUVYMRTm7yRrvz0V3fUyc5KAAA%3D&reser > ved=0 > > + > > +title: i.MX System Control and Management Interface(SCMI) Vendor > > +Protocols Extension > > + > > +maintainers: > > + - Peng Fan <peng.fan@nxp.com> > > + > > +allOf: > > + - $ref: arm,scmi.yaml# > > Sorry, but arm,scmi is a final schema. Is your plan to define some common > part? No. I just wanna add vendor extension per SCMI spec. 0x80-0xFF: Reserved for vendor or platform-specific extensions to this interface Each vendor may have different usage saying id 0x81, so I add i.MX dt-schema file. > > > + > > +properties: > > + protocol@81: > > + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > > + unevaluatedProperties: false > > + description: > > + The BBM Protocol is for managing Battery Backed Secure Module > (BBSM) RTC > > + and the ON/OFF Key > > + > > + properties: > > + reg: > > + const: 0x81 > > + > > + required: > > + - reg > > + > > + protocol@84: > > + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > > + unevaluatedProperties: false > > + description: > > + The MISC Protocol is for managing SoC Misc settings, such as > > + GPR settings > > Genera register is not a setting... this is a pleonasm. Please be more specific > what is the GPR, MISC protocol etc. The MISC Protocol is for managing SoC Misc settings, such as SAI MCLK/MQS in Always On domain BLK CTRL, SAI_CLK_SEL in WAKEUP BLK CTRL, gpio expanders which is under control of SCMI firmware. > > + > > + properties: > > + reg: > > + const: 0x84 > > + > > + wakeup-sources: > > + description: > > + Each entry consists of 2 integers, represents the source > > + and electric signal edge > > Can you answer questions from reviewers? Sorry. Is this ok? minItems: 1 maxItems: 32 > > > + items: > > + items: > > + - description: the wakeup source > > + - description: the wakeup electric signal edge > > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > > + > > + required: > > + - reg > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + firmware { > > + scmi { > > + compatible = "arm,scmi"; > > > + mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>; > > + shmem = <&scmi_buf0>, <&scmi_buf1>; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + protocol@81 { > > + reg = <0x81>; > > + }; > > + > > + protocol@84 { > > + reg = <0x84>; > > + wakeup-sources = <0x8000 1 > > + 0x8001 1 > > + 0x8002 1 > > + 0x8003 1 > > + 0x8004 1>; > > Nothing improved... If you are going to ignore reviews, then you will only get > NAKed. Sorry, you mean the examples, or the whole dt-schema? Thanks, Peng. > > Best regards, > Krzysztof
> Subject: RE: [PATCH v2 2/6] dt-bindings: firmware: add i.MX SCMI Extension > protocol > > > Subject: Re: [PATCH v2 2/6] dt-bindings: firmware: add i.MX SCMI > > Extension protocol > > > > On 05/04/2024 14:39, Peng Fan (OSS) wrote: > > > From: Peng Fan <peng.fan@nxp.com> > > > > > > Add i.MX SCMI Extension protocols bindings for: > > > - Battery Backed Secure Module(BBSM) > > > > Which is what? > > I should say BBM(BBSM + BBNSM), BBM has RTC and ON/OFF key features, > but BBM is managed by SCMI firmware and exported to agent by BBM > protocol. So add bindings for i.MX BBM protocol. > > Is this ok? > > > > > > - MISC settings such as General Purpose Registers settings. > > > > > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > > --- > > > .../devicetree/bindings/firmware/imx,scmi.yaml | 80 > > ++++++++++++++++++++++ > > > 1 file changed, 80 insertions(+) > > > > > > diff --git > > > a/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > > > b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > > > new file mode 100644 > > > index 000000000000..7ee19a661d83 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > > > @@ -0,0 +1,80 @@ > > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright > > > +2024 NXP %YAML 1.2 > > > +--- > > > +$id: > > > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fde > > > +vi > > > > > > +cetree.org%2Fschemas%2Ffirmware%2Fimx%2Cscmi.yaml%23&data=05%7 > > C02%7Cp > > > > > > +eng.fan%40nxp.com%7C5d16781d3eca425a342508dc562910b7%7C686ea > > 1d3bc2b4c > > > > > +6fa92cd99c5c301635%7C0%7C0%7C638479981570959816%7CUnknown% > > 7CTWFpbGZsb > > > > > > +3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn > > 0%3D > > > > > > +%7C0%7C%7C%7C&sdata=mWNwPvu2eyF18MroVOBHb%2Fjeo%2BIHfV5V > > h%2F9ebdx65MM > > > +%3D&reserved=0 > > > +$schema: > > > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fde > > > +vi > > > +cetree.org%2Fmeta- > > schemas%2Fcore.yaml%23&data=05%7C02%7Cpeng.fan%40nx > > > > > > +p.com%7C5d16781d3eca425a342508dc562910b7%7C686ea1d3bc2b4c6fa > > 92cd99c5c > > > > > > +301635%7C0%7C0%7C638479981570971949%7CUnknown%7CTWFpbGZs > > b3d8eyJWIjoiM > > > > > > +C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7 > > C%7C%7 > > > > > > +C&sdata=v4XnGG00D4I8j5MJvDUVYMRTm7yRrvz0V3fUyc5KAAA%3D&reser > > ved=0 > > > + > > > +title: i.MX System Control and Management Interface(SCMI) Vendor > > > +Protocols Extension > > > + > > > +maintainers: > > > + - Peng Fan <peng.fan@nxp.com> > > > + > > > +allOf: > > > + - $ref: arm,scmi.yaml# > > > > Sorry, but arm,scmi is a final schema. Is your plan to define some > > common part? > > No. I just wanna add vendor extension per SCMI spec. > > 0x80-0xFF: > Reserved for vendor or platform-specific extensions to this interface > > Each vendor may have different usage saying id 0x81, so I add i.MX dt- > schema file. > > > > > > + > > > +properties: > > > + protocol@81: > > > + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > > > + unevaluatedProperties: false > > > + description: > > > + The BBM Protocol is for managing Battery Backed Secure Module > > (BBSM) RTC > > > + and the ON/OFF Key > > > + > > > + properties: > > > + reg: > > > + const: 0x81 > > > + > > > + required: > > > + - reg > > > + > > > + protocol@84: > > > + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > > > + unevaluatedProperties: false > > > + description: > > > + The MISC Protocol is for managing SoC Misc settings, such as > > > + GPR settings > > > > Genera register is not a setting... this is a pleonasm. Please be more > > specific what is the GPR, MISC protocol etc. > > The MISC Protocol is for managing SoC Misc settings, such as SAI MCLK/MQS > in Always On domain BLK CTRL, SAI_CLK_SEL in WAKEUP BLK CTRL, gpio > expanders which is under control of SCMI firmware. > > > > + > > > + properties: > > > + reg: > > > + const: 0x84 > > > + > > > + wakeup-sources: > > > + description: > > > + Each entry consists of 2 integers, represents the source > > > + and electric signal edge > > > > Can you answer questions from reviewers? > > Sorry. Is this ok? > minItems: 1 > maxItems: 32 > > > > > > + items: > > > + items: > > > + - description: the wakeup source > > > + - description: the wakeup electric signal edge > > > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > > > + > > > + required: > > > + - reg > > > + > > > +additionalProperties: false > > > + > > > +examples: > > > + - | > > > + firmware { > > > + scmi { > > > + compatible = "arm,scmi"; > > > > > + mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>; > > > + shmem = <&scmi_buf0>, <&scmi_buf1>; > > > + > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + protocol@81 { > > > + reg = <0x81>; > > > + }; > > > + > > > + protocol@84 { > > > + reg = <0x84>; > > > + wakeup-sources = <0x8000 1 > > > + 0x8001 1 > > > + 0x8002 1 > > > + 0x8003 1 > > > + 0x8004 1>; > > > > Nothing improved... If you are going to ignore reviews, then you will > > only get NAKed. > > Sorry, you mean the examples, or the whole dt-schema? Missed Rob's comment, will use < > for each entry. Thanks, Peng. > > Thanks, > Peng. > > > > Best regards, > > Krzysztof
On 07/04/2024 02:51, Peng Fan wrote: >> Subject: Re: [PATCH v2 2/6] dt-bindings: firmware: add i.MX SCMI Extension >> protocol >> >> On 05/04/2024 14:39, Peng Fan (OSS) wrote: >>> From: Peng Fan <peng.fan@nxp.com> >>> >>> Add i.MX SCMI Extension protocols bindings for: >>> - Battery Backed Secure Module(BBSM) >> >> Which is what? > > I should say BBM(BBSM + BBNSM), BBM has RTC and ON/OFF > key features, but BBM is managed by SCMI firmware and exported > to agent by BBM protocol. So add bindings for i.MX BBM protocol. > > Is this ok? No, I still don't know what is BBSM, BBNSM and BBM. > >> >>> - MISC settings such as General Purpose Registers settings. >>> >>> Signed-off-by: Peng Fan <peng.fan@nxp.com> >>> --- >>> .../devicetree/bindings/firmware/imx,scmi.yaml | 80 >> ++++++++++++++++++++++ >>> 1 file changed, 80 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/firmware/imx,scmi.yaml >>> b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml >>> new file mode 100644 >>> index 000000000000..7ee19a661d83 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml >>> @@ -0,0 +1,80 @@ >>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2024 >>> +NXP %YAML 1.2 >>> +--- >>> +$id: >>> +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi >>> >> +cetree.org%2Fschemas%2Ffirmware%2Fimx%2Cscmi.yaml%23&data=05%7 >> C02%7Cp >>> >> +eng.fan%40nxp.com%7C5d16781d3eca425a342508dc562910b7%7C686ea >> 1d3bc2b4c >>> >> +6fa92cd99c5c301635%7C0%7C0%7C638479981570959816%7CUnknown% >> 7CTWFpbGZsb >>> >> +3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn >> 0%3D >>> >> +%7C0%7C%7C%7C&sdata=mWNwPvu2eyF18MroVOBHb%2Fjeo%2BIHfV5V >> h%2F9ebdx65MM >>> +%3D&reserved=0 >>> +$schema: >>> +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi >>> +cetree.org%2Fmeta- >> schemas%2Fcore.yaml%23&data=05%7C02%7Cpeng.fan%40nx >>> >> +p.com%7C5d16781d3eca425a342508dc562910b7%7C686ea1d3bc2b4c6fa >> 92cd99c5c >>> >> +301635%7C0%7C0%7C638479981570971949%7CUnknown%7CTWFpbGZs >> b3d8eyJWIjoiM >>> >> +C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7 >> C%7C%7 >>> >> +C&sdata=v4XnGG00D4I8j5MJvDUVYMRTm7yRrvz0V3fUyc5KAAA%3D&reser >> ved=0 >>> + >>> +title: i.MX System Control and Management Interface(SCMI) Vendor >>> +Protocols Extension >>> + >>> +maintainers: >>> + - Peng Fan <peng.fan@nxp.com> >>> + >>> +allOf: >>> + - $ref: arm,scmi.yaml# >> >> Sorry, but arm,scmi is a final schema. Is your plan to define some common >> part? > > No. I just wanna add vendor extension per SCMI spec. > > 0x80-0xFF: > Reserved for vendor or platform-specific extensions to this interface > > Each vendor may have different usage saying id 0x81, so I add > i.MX dt-schema file. > >> >>> + >>> +properties: >>> + protocol@81: >>> + $ref: 'arm,scmi.yaml#/$defs/protocol-node' >>> + unevaluatedProperties: false >>> + description: >>> + The BBM Protocol is for managing Battery Backed Secure Module >> (BBSM) RTC >>> + and the ON/OFF Key >>> + >>> + properties: >>> + reg: >>> + const: 0x81 >>> + >>> + required: >>> + - reg >>> + >>> + protocol@84: >>> + $ref: 'arm,scmi.yaml#/$defs/protocol-node' >>> + unevaluatedProperties: false >>> + description: >>> + The MISC Protocol is for managing SoC Misc settings, such as >>> + GPR settings >> >> Genera register is not a setting... this is a pleonasm. Please be more specific >> what is the GPR, MISC protocol etc. > > The MISC Protocol is for managing SoC Misc settings, such as SAI MCLK/MQS in > Always On domain BLK CTRL, SAI_CLK_SEL in WAKEUP BLK CTRL, gpio > expanders which is under control of SCMI firmware. So like a bag for everything which you do not want to call something specific? No, be specific... > >>> + >>> + properties: >>> + reg: >>> + const: 0x84 >>> + >>> + wakeup-sources: >>> + description: >>> + Each entry consists of 2 integers, represents the source >>> + and electric signal edge >> >> Can you answer questions from reviewers? > > Sorry. Is this ok? > minItems: 1 > maxItems: 32 No. Does it answers Rob's question? I see zero correlation to his question. Do not ignore emails from reviewers but respond to them. > >> >>> + items: >>> + items: >>> + - description: the wakeup source >>> + - description: the wakeup electric signal edge >>> + $ref: /schemas/types.yaml#/definitions/uint32-matrix >>> + >>> + required: >>> + - reg >>> + >>> +additionalProperties: false >>> + >>> +examples: >>> + - | >>> + firmware { >>> + scmi { >>> + compatible = "arm,scmi"; >> >>> + mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>; >>> + shmem = <&scmi_buf0>, <&scmi_buf1>; >>> + >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + protocol@81 { >>> + reg = <0x81>; >>> + }; >>> + >>> + protocol@84 { >>> + reg = <0x84>; >>> + wakeup-sources = <0x8000 1 >>> + 0x8001 1 >>> + 0x8002 1 >>> + 0x8003 1 >>> + 0x8004 1>; >> >> Nothing improved... If you are going to ignore reviews, then you will only get >> NAKed. > > Sorry, you mean the examples, or the whole dt-schema? *Read comments and respond to them*. Regardless where they are. Best regards, Krzysztof
> Subject: Re: [PATCH v2 2/6] dt-bindings: firmware: add i.MX SCMI Extension > protocol > > On 07/04/2024 02:51, Peng Fan wrote: > >> Subject: Re: [PATCH v2 2/6] dt-bindings: firmware: add i.MX SCMI > >> Extension protocol > >> > >> On 05/04/2024 14:39, Peng Fan (OSS) wrote: > >>> From: Peng Fan <peng.fan@nxp.com> > >>> > >>> Add i.MX SCMI Extension protocols bindings for: > >>> - Battery Backed Secure Module(BBSM) > >> > >> Which is what? > > > > I should say BBM(BBSM + BBNSM), BBM has RTC and ON/OFF key features, > > but BBM is managed by SCMI firmware and exported to agent by BBM > > protocol. So add bindings for i.MX BBM protocol. > > > > Is this ok? > > No, I still don't know what is BBSM, BBNSM and BBM. From RM: The Battery Backup (BB) Domain contains the Battery Backed Security Module (BBSM) and the Battery Backed Non-Secure Module (BBNSM). BBNSM: The BBNSM is the interface to a non-interruptable power supply (backup battery) and serves as the non-volatile logic and storage for the chip. When the chip is powered off, the BBNSM will maintain PMIC logic while connected to a backup supply. Main features: RTC, PMIC Control, ONOFF Control BBSM serves as nonvolatile security logic and storage for ELE Main features: Monotonic counter, Secure RTC, Zeroizable Master Key, Security Violation and Tamper Detection > > > > >> > >>> - MISC settings such as General Purpose Registers settings. > >>> > >>> Signed-off-by: Peng Fan <peng.fan@nxp.com> > >>> --- > >>> .../devicetree/bindings/firmware/imx,scmi.yaml | 80 > >> ++++++++++++++++++++++ > >>> 1 file changed, 80 insertions(+) > >>> > >>> diff --git > >>> a/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > >>> b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > >>> new file mode 100644 > >>> index 000000000000..7ee19a661d83 > >>> --- /dev/null > >>> +++ b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > >>> @@ -0,0 +1,80 @@ > >>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright > >>> +2024 NXP %YAML 1.2 > >>> +--- > >>> +$id: > >>> +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fde > >>> > +vi%2F&data=05%7C02%7Cpeng.fan%40nxp.com%7C410d9f1b5b874269dc6 > 908dc5 > >>> > +6e0b628%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638480 > 77032584 > >>> > +3394%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2l > uMzIiLC > >>> > +JBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=e4zKRcyHbSCtn > o6%2B% > >>> +2BBaz%2FGhvPT0HikAdLmwi4VZxX4o%3D&reserved=0 > >>> > >> > +cetree.org%2Fschemas%2Ffirmware%2Fimx%2Cscmi.yaml%23&data=05%7 > >> C02%7Cp > >>> > >> > +eng.fan%40nxp.com%7C5d16781d3eca425a342508dc562910b7%7C686ea > >> 1d3bc2b4c > >>> > >> > +6fa92cd99c5c301635%7C0%7C0%7C638479981570959816%7CUnknown% > >> 7CTWFpbGZsb > >>> > >> > +3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn > >> 0%3D > >>> > >> > +%7C0%7C%7C%7C&sdata=mWNwPvu2eyF18MroVOBHb%2Fjeo%2BIHfV5V > >> h%2F9ebdx65MM > >>> +%3D&reserved=0 > >>> +$schema: > >>> +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fde > >>> > +vi%2F&data=05%7C02%7Cpeng.fan%40nxp.com%7C410d9f1b5b874269dc6 > 908dc5 > >>> > +6e0b628%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638480 > 77032585 > >>> > +6477%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2l > uMzIiLC > >>> > +JBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=y1OBJ%2FPp4 > MljifpmG > >>> +ZM%2FB6Ab20ivqm2qef7gzEjbNmA%3D&reserved=0 > >>> +cetree.org%2Fmeta- > >> schemas%2Fcore.yaml%23&data=05%7C02%7Cpeng.fan%40nx > >>> > >> > +p.com%7C5d16781d3eca425a342508dc562910b7%7C686ea1d3bc2b4c6fa > >> 92cd99c5c > >>> > >> > +301635%7C0%7C0%7C638479981570971949%7CUnknown%7CTWFpbGZs > >> b3d8eyJWIjoiM > >>> > >> > +C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7 > >> C%7C%7 > >>> > >> > +C&sdata=v4XnGG00D4I8j5MJvDUVYMRTm7yRrvz0V3fUyc5KAAA%3D&reser > >> ved=0 > >>> + > >>> +title: i.MX System Control and Management Interface(SCMI) Vendor > >>> +Protocols Extension > >>> + > >>> +maintainers: > >>> + - Peng Fan <peng.fan@nxp.com> > >>> + > >>> +allOf: > >>> + - $ref: arm,scmi.yaml# > >> > >> Sorry, but arm,scmi is a final schema. Is your plan to define some > >> common part? > > > > No. I just wanna add vendor extension per SCMI spec. > > > > 0x80-0xFF: > > Reserved for vendor or platform-specific extensions to this interface > > > > Each vendor may have different usage saying id 0x81, so I add i.MX > > dt-schema file. > > > >> > >>> + > >>> +properties: > >>> + protocol@81: > >>> + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > >>> + unevaluatedProperties: false > >>> + description: > >>> + The BBM Protocol is for managing Battery Backed Secure Module > >> (BBSM) RTC > >>> + and the ON/OFF Key > >>> + > >>> + properties: > >>> + reg: > >>> + const: 0x81 > >>> + > >>> + required: > >>> + - reg > >>> + > >>> + protocol@84: > >>> + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > >>> + unevaluatedProperties: false > >>> + description: > >>> + The MISC Protocol is for managing SoC Misc settings, such as > >>> + GPR settings > >> > >> Genera register is not a setting... this is a pleonasm. Please be > >> more specific what is the GPR, MISC protocol etc. > > > > The MISC Protocol is for managing SoC Misc settings, such as SAI > > MCLK/MQS in Always On domain BLK CTRL, SAI_CLK_SEL in WAKEUP BLK > > CTRL, gpio expanders which is under control of SCMI firmware. > > So like a bag for everything which you do not want to call something specific? > > No, be specific... This is not linux stuff, this is i.MX SCMI firmware design. Sadly there is no public RM for i.MX95, we could not afford each settings has a protocol ID, it is too heavy. The name MISC is not developed for linux, it is firmware owner decided to use it. > > > > >>> + > >>> + properties: > >>> + reg: > >>> + const: 0x84 > >>> + > >>> + wakeup-sources: > >>> + description: > >>> + Each entry consists of 2 integers, represents the source > >>> + and electric signal edge > >> > >> Can you answer questions from reviewers? > > > > Sorry. Is this ok? > > minItems: 1 > > maxItems: 32 > > No. Does it answers Rob's question? I see zero correlation to his question. Constraints and edge, right? Edge, I have use electric signal edge, so what else? > > Do not ignore emails from reviewers but respond to them. > > > > >> > >>> + items: > >>> + items: > >>> + - description: the wakeup source > >>> + - description: the wakeup electric signal edge > >>> + $ref: /schemas/types.yaml#/definitions/uint32-matrix > >>> + > >>> + required: > >>> + - reg > >>> + > >>> +additionalProperties: false > >>> + > >>> +examples: > >>> + - | > >>> + firmware { > >>> + scmi { > >>> + compatible = "arm,scmi"; > >> > >>> + mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>; > >>> + shmem = <&scmi_buf0>, <&scmi_buf1>; > >>> + > >>> + #address-cells = <1>; > >>> + #size-cells = <0>; > >>> + > >>> + protocol@81 { > >>> + reg = <0x81>; > >>> + }; > >>> + > >>> + protocol@84 { > >>> + reg = <0x84>; > >>> + wakeup-sources = <0x8000 1 > >>> + 0x8001 1 > >>> + 0x8002 1 > >>> + 0x8003 1 > >>> + 0x8004 1>; > >> > >> Nothing improved... If you are going to ignore reviews, then you will > >> only get NAKed. > > > > Sorry, you mean the examples, or the whole dt-schema? > > *Read comments and respond to them*. Regardless where they are. Yeah. My bad. Thanks, Peng > > Best regards, > Krzysztof
On Fri, Apr 05, 2024 at 08:39:24PM +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > Add i.MX SCMI Extension protocols bindings for: > - Battery Backed Secure Module(BBSM) > - MISC settings such as General Purpose Registers settings. > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > .../devicetree/bindings/firmware/imx,scmi.yaml | 80 ++++++++++++++++++++++ > 1 file changed, 80 insertions(+) > > diff --git a/Documentation/devicetree/bindings/firmware/imx,scmi.yaml b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > new file mode 100644 > index 000000000000..7ee19a661d83 > --- /dev/null > +++ b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > @@ -0,0 +1,80 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2024 NXP > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/firmware/imx,scmi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: i.MX System Control and Management Interface(SCMI) Vendor Protocols Extension > + > +maintainers: > + - Peng Fan <peng.fan@nxp.com> > + > +allOf: > + - $ref: arm,scmi.yaml# This needs to be the other way around. Add a ref to this file in arm,scmi.yaml under an 'anyOf' entry. > + > +properties: > + protocol@81: > + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > + unevaluatedProperties: false > + description: > + The BBM Protocol is for managing Battery Backed Secure Module (BBSM) RTC > + and the ON/OFF Key > + > + properties: > + reg: > + const: 0x81 > + > + required: > + - reg > + > + protocol@84: > + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > + unevaluatedProperties: false > + description: > + The MISC Protocol is for managing SoC Misc settings, such as GPR settings > + > + properties: > + reg: > + const: 0x84 > + > + wakeup-sources: > + description: > + Each entry consists of 2 integers, represents the source and electric signal edge > + items: > + items: > + - description: the wakeup source > + - description: the wakeup electric signal edge No constraints on the entry values? > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + > + required: > + - reg > + > +additionalProperties: false And then this can be true. Rob
> Subject: Re: [PATCH v2 2/6] dt-bindings: firmware: add i.MX SCMI Extension > protocol > > On Fri, Apr 05, 2024 at 08:39:24PM +0800, Peng Fan (OSS) wrote: > > From: Peng Fan <peng.fan@nxp.com> > > > > Add i.MX SCMI Extension protocols bindings for: > > - Battery Backed Secure Module(BBSM) > > - MISC settings such as General Purpose Registers settings. > > > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > --- > > .../devicetree/bindings/firmware/imx,scmi.yaml | 80 > ++++++++++++++++++++++ > > 1 file changed, 80 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > > b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > > new file mode 100644 > > index 000000000000..7ee19a661d83 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml > > @@ -0,0 +1,80 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) # Copyright 2024 > > +NXP %YAML 1.2 > > +--- > > +$id: > > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi > > > +cetree.org%2Fschemas%2Ffirmware%2Fimx%2Cscmi.yaml%23&data=05%7 > C02%7Cp > > > +eng.fan%40nxp.com%7C25c72418c9864a73924808dc59826288%7C686ea > 1d3bc2b4c > > > +6fa92cd99c5c301635%7C0%7C0%7C638483663734828123%7CUnknown% > 7CTWFpbGZsb > > > +3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn > 0%3D > > > +%7C0%7C%7C%7C&sdata=Y2uSGDorqR9HK8PO4AQDQ%2FaTv%2BETnulvU > C8u9ktDoio%3 > > +D&reserved=0 > > +$schema: > > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi > > +cetree.org%2Fmeta- > schemas%2Fcore.yaml%23&data=05%7C02%7Cpeng.fan%40nx > > > +p.com%7C25c72418c9864a73924808dc59826288%7C686ea1d3bc2b4c6fa > 92cd99c5c > > > +301635%7C0%7C0%7C638483663734841350%7CUnknown%7CTWFpbGZs > b3d8eyJWIjoiM > > > +C4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7 > C%7C%7 > > > +C&sdata=h6lSgnPvR88CEBxmU%2B%2FCfCx9GHUrogWVxck38sIdhB4%3D&r > eserved=0 > > + > > +title: i.MX System Control and Management Interface(SCMI) Vendor > > +Protocols Extension > > + > > +maintainers: > > + - Peng Fan <peng.fan@nxp.com> > > + > > +allOf: > > + - $ref: arm,scmi.yaml# > > This needs to be the other way around. Add a ref to this file in arm,scmi.yaml > under an 'anyOf' entry. ok, I will give a try. > > > + > > +properties: > > + protocol@81: > > + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > > + unevaluatedProperties: false > > + description: > > + The BBM Protocol is for managing Battery Backed Secure Module > (BBSM) RTC > > + and the ON/OFF Key > > + > > + properties: > > + reg: > > + const: 0x81 > > + > > + required: > > + - reg > > + > > + protocol@84: > > + $ref: 'arm,scmi.yaml#/$defs/protocol-node' > > + unevaluatedProperties: false > > + description: > > + The MISC Protocol is for managing SoC Misc settings, such as > > + GPR settings > > + > > + properties: > > + reg: > > + const: 0x84 > > + > > + wakeup-sources: > > + description: > > + Each entry consists of 2 integers, represents the source and electric > signal edge > > + items: > > + items: > > + - description: the wakeup source > > + - description: the wakeup electric signal edge > > No constraints on the entry values? I will change the property name to imx,wakup-sources with constraints minItems: 1 maxItems: 32. > > > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > > + > > + required: > > + - reg > > + > > +additionalProperties: false > > And then this can be true. Fix in v3. Thanks Peng. > > Rob
diff --git a/Documentation/devicetree/bindings/firmware/imx,scmi.yaml b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml new file mode 100644 index 000000000000..7ee19a661d83 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/imx,scmi.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2024 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/imx,scmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX System Control and Management Interface(SCMI) Vendor Protocols Extension + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +allOf: + - $ref: arm,scmi.yaml# + +properties: + protocol@81: + $ref: 'arm,scmi.yaml#/$defs/protocol-node' + unevaluatedProperties: false + description: + The BBM Protocol is for managing Battery Backed Secure Module (BBSM) RTC + and the ON/OFF Key + + properties: + reg: + const: 0x81 + + required: + - reg + + protocol@84: + $ref: 'arm,scmi.yaml#/$defs/protocol-node' + unevaluatedProperties: false + description: + The MISC Protocol is for managing SoC Misc settings, such as GPR settings + + properties: + reg: + const: 0x84 + + wakeup-sources: + description: + Each entry consists of 2 integers, represents the source and electric signal edge + items: + items: + - description: the wakeup source + - description: the wakeup electric signal edge + $ref: /schemas/types.yaml#/definitions/uint32-matrix + + required: + - reg + +additionalProperties: false + +examples: + - | + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&mu2 5 0>, <&mu2 3 0>, <&mu2 3 1>; + shmem = <&scmi_buf0>, <&scmi_buf1>; + + #address-cells = <1>; + #size-cells = <0>; + + protocol@81 { + reg = <0x81>; + }; + + protocol@84 { + reg = <0x84>; + wakeup-sources = <0x8000 1 + 0x8001 1 + 0x8002 1 + 0x8003 1 + 0x8004 1>; + }; + }; + }; +...